Connecting sets X-Z, Aluminium
- Sconto volumi elevati
The combination is created by using two connection plates which eliminate any type of fixing holes in the slides. At the same time the adjustable slide unit with the Z-axis can, to a limited extent (vertically to the Z-axis), still be adjusted.
In the case of a slide configuration of the Z-axis parallel to the reference axis (type P) an adaptor plate (complete with a fastening set, small fixing plates and socket head cap screws) is required which is included in the set.
The small fixing plates serves for the 90° alignment of the Z-axis and fine adjustment of the adaptor plate (Type P).
All parts required to make up a set are included.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
Codice componente
|
|---|
| 900.3-30-30-P |
| 900.3-30-30-S |
| 900.3-50-50-P |
| 900.3-50-50-S |
| 900.3-80-80-P |
| 900.3-80-80-S |
| 900.3-120-120-P |
| 900.3-120-120-S |
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | Width b | Length l1 | Type | |
|---|---|---|---|---|---|---|---|
174.06 € | 1 | Disponibile | 7 giorni | 30 | 30 | P, Mounting the Z-axis via connecting plate and additional plate | |
84.88 € | 1 | Disponibile | 7 giorni | 30 | 30 | S, Direct mounting of the Z-axis via connecting plate | |
174.06 € | 1 | Disponibile | 7 giorni | 50 | 50 | P, Mounting the Z-axis via connecting plate and additional plate | |
84.50 € | 1 | Disponibile | 7 giorni | 50 | 50 | S, Direct mounting of the Z-axis via connecting plate | |
223.76 € | 1 | Disponibile | 7 giorni | 80 | 80 | P, Mounting the Z-axis via connecting plate and additional plate | |
111.82 € | 1 | Disponibile | 7 giorni | 80 | 80 | S, Direct mounting of the Z-axis via connecting plate | |
337.42 € | 1 | Disponibile | 7 giorni | 120 | 120 | P, Mounting the Z-axis via connecting plate and additional plate | |
166.08 € | 1 | Disponibile | 7 giorni | 120 | 120 | S, Direct mounting of the Z-axis via connecting plate |
Loading...
Configura
Proprietà di base
-
Width b
- 30
- 50
- 80
- 120
-
Length l1
- 30
- 50
- 80
- 120
-
Type
- P, Mounting the Z-axis via connecting plate and additional plate
- S, Direct mounting of the Z-axis via connecting plate
-
Tipo
-
Filtrare per tipo dati CAD
- 2D
- 3D
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 7 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.