• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Indexing plungers for precision locating (Codici componente - Download CAD)

Indexing plungers for precision locating
  • In Offerta
  • Sconto volumi elevati

GANTER

GANTER

Indexing plungers GN 817.3 realize a reasonable priced precision locating when guide bushes DIN 179 are used.
For this purpose a guide bush DIN 179 is used as guide, whereby the dimension l3 of the plunger determines the length of the bush.
The precise location is, therefore, not dependent on the guide pin in the plunger, but on the accuracy of the guide bush (bore tolerance F7) and the plunger (tolerance h7). Both components are hardened and ground. It goes without saying that the bush length also influences the accuracy of the positioning.
Type C is used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

GN 817.3 / Indexing Plungers for Precision Locating, Plunger Cylindrical

Information


Indexing plungers GN 817.3 realize a reasonable priced precision locating when guide bushings DIN 172 / DIN 179 are used.
The precise location is, therefore, not dependent on the guide pin in the plunger, but on the accuracy of the guide bushing (bore tolerance F7) and the plunger (tolerance h7). Both components are hardened and ground. It goes without saying that the bushing length also influences the accuracy of the positioning.
Type C is used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

see also...
• Construction and assembly instructions
• List of indexing plunger types
• Guide bushings DIN 172 / DIN 179 (cylindrical, with / without collar)
• Guide bushings DIN 172 .1 / DIN 179.1 (conical, with / without collar)

How to Order

How to order
1d1
2l1
3Type

Specification

• Steel
 - blackened
 - Plunger pin hardened and ground
• Knob
 Plastic (Polyamide PA)
 - black, matt
 - not removable
• Load rating information
• ISO-Fundamental tolerances
• Plastic characteristics
• RoHS compliant

Dimensions

            
d1
Pin h6		l1l2
Stroke		l3bd2d3d4kl4l5l6Spring load in N ≈
            initialend
6189913234.3342345625625
62491513234.3342345625625
820101016285.53826518278.528
826101616285.53826518278.528
1024121216285.53826518279.538
1032122016285.53826518279.538

Construction and Assembly Instructions for Indexing Plungers GN 817.3 (Plunger Pin Cylindrical)

Two different plunger pin lengths l1 are available for each indexing plunger diameter d1.
The length l3 must ensure that the plunger pin fully disengages, bushing length and plate thickness plus any gap can then be selected within certain margins.
For mounting bushings with tolerance n6, a hole with tolerance H7 corresponding to the external diameter is usually provided.
A selection of suitable guide bushings DIN 172 and DIN 179 is given below on.

see also...
• Indexing plungers GN 817.3 (Plunger pin cylindrical)

Construction and Assembly Instructions for Indexing Plungers GN 817.5 (Plunger Pin Conical)

The length l7 is determined by the penetration depth of the plunger pin into the cone of the bushing.
The length l8 must ensure that the plunger pin fully disengages, bushing length and plate thickness plus any gap can then be selected within certain margins.
If engaged, the pin must have a minimum remaining stroke of 0.5 mm to make sure that the conical section of the pin is located without clearance in the cone of the guide bushing.
Two different plunger pin lengths l1 are available for each indexing plunger diameter d1 (see product table).
For a safe remaining stroke length: l9 = l1 - 0.5 mm
For mounting bushings with tolerance n6, a hole with tolerance H7 corresponding to the external diameter is usually provided.
A selection of suitable guide bushings DIN 172 / DIN 179 with cylindrical bore and guide bushings GN 172.1 / GN 179.1 with conical bore is given below on.

see also...
• Indexing plungers GN 817.5 (Plunger pin conical)
Numero di dati da visualizzare
30
45
60
  1. 1
Codice componente
817.3-6-18-B
817.3-6-18-C
817.3-6-24-B
817.3-6-24-C
817.3-8-20-B
817.3-8-20-C
817.3-8-26-B
817.3-8-26-C
817.3-10-24-B
817.3-10-24-C
817.3-10-32-B
817.3-10-32-C
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
D.E. punta d
(Ø) 		Length l1 Type

27.02 €

1 Disponibile 7 giorni 618B, without rest position, with plastic knob

32.02 €

1 Disponibile 7 giorni 618C, with rest position

27.80 €

1 Disponibile 7 giorni 624B, without rest position, with plastic knob

32.86 €

1 Disponibile 7 giorni 624C, with rest position

28.40 €

15.05 €

1 Disponibile Stesso giorno

Stock

820B, without rest position, with plastic knob

34.42 €

1 Disponibile 7 giorni 820C, with rest position

28.90 €

1 Disponibile 7 giorni 826B, without rest position, with plastic knob

34.86 €

1 Disponibile 7 giorni 826C, with rest position

29.36 €

1 Disponibile 7 giorni 1024B, without rest position, with plastic knob

34.86 €

1 Disponibile 4 giorni 1024C, with rest position

30.90 €

1 Disponibile 7 giorni 1032B, without rest position, with plastic knob

36.46 €

1 Disponibile 7 giorni 1032C, with rest position

Loading...

  1. 1
 

Configura

Ripristina

12Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Stock

Proprietà di base

Filtrare per giorni di spedizione standard

    • Tutti gli articoli
    • Stesso giorno
    • 4 giorni o meno
    • 7 giorni o meno

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.