AW10-40-A, AW combinazione filtro/regolatore (AW10-M5BG-6Z-A)
- In Offerta fino al 31/12/2024
Dettagli del prodotto:
Codice articolo del costruttore: AW10-M5BG-6Z-A
Marca: SMC
Prezzo: 35.85 €
Tempi di consegna: 26 giorni
Dati Tecnici:
Diametro collegamento: M5
Pressione di esercizio max.: 1 MPa
Materiali involucro: [Resina] Involucro in nylon
Protezione coppa: NA
Meccanismo di scarico: Tipo di scarico
(i)Nota
- I prodotti mostrati nell'immagine sono rappresentativi. I dati CAD non sono supportati per alcuni numeri di modello.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
AW10-M5BG-6Z-A
Filter Regulator AW10-A to AW40-A Detailed Example
AW10-A product image
AW20-A product image
AW40-A product image
Model Number Notation
Model number example
How to order: images
Image of how options are displayed
- *1: The drain guide is NPT1/8 (applicable to the AW20-A) and NPT1/4 (applicable to the AW30-A to AW40-A). The auto drain port comes with a ø3/8 (diameter 3/8") single-action fitting (applicable to the AW30-A to AW40-A).
- *2: The drain guide is G1/8 (applicable to the AW20-A); and G1/4 (applicable to the AW30-A to AW40-A).
- *3: Options B, G, H, and M are not assembled and are supplied loose at the time of shipment.
- *4: Set nuts included with brackets.
- *5: When pressure is not applied, condensate which does not start the auto drain mechanism will remain in the drain bowl. Therefore manual release before ending operations is recommended.
- *6: If the compressor used is small (0.75 kW, discharge flow rate is less than 100 L/min [ANR]), air leakage from the drain cock may occur when operations start. As such an N.C. type is recommended.
- *7: When the pressure gauge is attached, a 1.0 MPa will be fitted for standard (0.7 MPa setting) type; 0.4 MPa for the 0.2‑MPa type (1.0‑MPa pressure gauge only for the AW10-A).
- *8: Pressure can be set higher than the specification pressure in some cases, but use with the pressure within the specified range.
- *10: For the chemical resistance of the bowl, refer to the table "Effects of atmosphere of organic solvents and chemicals and where these elements are likely to adhere to the equipment. Chemical data for substances causing degradation (Reference)." in "Specific Product Precautions" in the manufacturer's catalog.
- *10: A bowl guard is provided as standard (polycarbonate).
- *11: A bowl guard is provided as standard (nylon).
- *12: Float type auto drain: Cannot be selected in combination with C, D.
- *13: Does not include a valve function.
- *14: Metal bowl: Cannot be selected in combination with 2, 8.
- *15: Thread type NPT is applicable. Under new Japanese measurement laws (the products salable inside of Japan are the SI unit type), so this product is only salable outside of Japan. Round-type pressure gauge (with color zone): cannot be used in combination with M. Available on request as separate, special order from the manufacturer.
- *16: ○ is for thread types M5 and NPT only.
How to Order X406/X64
X406/X64 model number example
How to order X406/X64: image 1
How to order X406/X64: image 2
- *2: The drain guide is NPT1/8 (applicable to the AW20-A) and NPT1/4 (applicable to the AW30-A to AW40-A). The auto drain port comes with a ø3/8 (diameter 3/8") single-action fitting (applicable to the AW30-A to AW40-A).
- *3: The drain guide is G1/8 (applicable to the AW20-A) and G1/4 (applicable to the AW30-A to AW40-A).
- *4: Options B, G, H, and M are not assembled and are supplied loose at the time of shipment.
- *5: Set nuts included with brackets.
- *6: When pressure is not applied, condensate which does not start the auto drain mechanism will remain in the drain bowl. Therefore manual release before ending operations is recommended.
- *7: If the compressor used is small (0.75 kW, discharge flow rate is less than 100 L/min [ANR]), air leakage from the drain cock may occur when operations start. As such an N.C. type is recommended.
- *8: When the pressure gauge is attached, a 1.0‑MPa gauge will be fitted for the standard (0.7‑MPa setting) type; and a 0.4‑MPa gauge for the 0.2‑MPa type.
- *9: Pressure can be set higher than the specification pressure in some cases, but use with the pressure within the specified range.
- *10: For the chemical resistance of the bowl, refer to "Effects of atmosphere of organic solvents and chemicals and where these elements are likely to adhere to the equipment. Chemical data for substances causing degradation (Reference)." in the manufacturer's catalog.
- *11: Float type auto drain: Cannot be selected in combination with C, D.
- *12: A bowl guard is provided as standard (polycarbonate).
- *13: A bowl guard is provided as standard (nylon).
- *14: Does not include a valve function.
- *15: Metal bowl: Cannot be selected in combination with 2, 8.
- *16: Thread type NPT is applicable. Under new Japanese measurement laws (the products salable inside of Japan are the SI unit type), so this product is only salable outside of Japan. Round-type pressure gauge (with color zone): cannot be used in combination with M. Available on request as separate, special order from the manufacturer.
- *17: ○ is for thread type NPT only.
How to Order X2068
X2068 model number example
How to order X2068: image 1
How to order X2068: image 2
- *1: The drain guide is NPT1/8 (applicable to t
Codice componente
|
|---|
| AW10-M5BG-6Z-A |
| Codice componente | Relativo a |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | Diametro collegamento | Pressione di esercizio max. (MPa) | Materiali involucro | Protezione coppa | Meccanismo di scarico | Direzione flusso | Rubinetto di scarico | Manometro | Size of Body | Set Pressure | Drain Outlet | Pressure Unit | Specifiche su ordinazione | Accessori | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| - | 35.85 € | 1 | 26 giorni | M5 | 1 | [Resina] Involucro in nylon | NA | Tipo di scarico | [Flusso standard (da sinistra a destra)] Direzione flusso | [Tipo manuale] Manuale | [Con manometro standard] Manometro profilo rotondo (senza indicatore di limite) | 10 | 0.05–0.7MPa | Con rubinetto di scarico | Unità targhetta identificativa, piastra di avvertenza bicchierino e manometro: psi, °F | Assente | Con staffa |
Loading...
Informazioni di base
| Combinazione regolatori | Regolatore filtro | Filtro, livello di filtraggio | 5μm | Qualità aria compressa | Aria secca comune |
|---|
Configura
Proprietà di base
-
Tipo
- AW10
- AW20
- AW30
- AW40
-
Diametro collegamento
- Rc1/8
- Rc1/4
- Rc3/8
- Rc1/2
- Rc3/4
- NPT1/4
- NPT3/8
- G1/4
- G3/8
- NPT1/2
- NPT3/4
- NPT1/8
- G1/8
- G1/2
- G3/4
- M5
-
Pressione di esercizio max.(MPa)
-
Materiali involucro
- Resina
- Resina
-
Protezione coppa
- NA
- Disponibile
-
Meccanismo di scarico
- Tipo senza rilievo
- Tipo di scarico
-
Direzione flusso
- Flusso standard (da sinistra a destra)
- Flusso inverso (da destra a sinistra)
- Flusso standard (da sinistra a destra)
-
Rubinetto di scarico
- Tipo manuale
- Automatico/manuale
- Non in dotazione
- Tipo manuale
-
Manometro
- No (No Pressure Port Plug)
- Con manometro standard
-
Size of Body
-
Set Pressure
- 0,05–0,4 MPa
- 0,05 bis 0,7 MPa
- 0.02–0.2MPa
- 0.05–0.7MPa
- 0.05–0.85MPa
-
Drain Outlet
- Guida di scarico 1/4
- Guida di scarico 1/8
- Con rubinetto di scarico, raccordo spinato (per tubo di nylon ⌀6 x ⌀4)
- Con rubinetto di scarico
- Mit Ablasshahn
-
Pressure Unit
- Einheit auf Typenschild und Druckmesser: MPa
- Unità targhetta identificativa, piastra di avvertenza bicchierino e manometro: psi, °F
- Unità utilizzata su targhetta identificativa e manometro: MPa
-
Specifiche su ordinazione
- Impostazione 0,4 MPa
- Impostazione di 0,85 MPa
- Assente
- Impostazione bicchierino lungo
- Lange Schale Einstellung
- Ohne
-
Accessori
- Assente
- Con dado di fermo (per montaggio pannello)
- Con staffa
- Mit Befestigungselement
- Mit Muttern (für Panelmontage)
- Ohne
-
Filtrare per tipo dati CAD
- 2D
- 3D
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- Stesso giorno
- 4 giorni o meno
- 6 giorni o meno
- 7 giorni o meno
- 26 giorni o meno
- 39 giorni o meno
- 68 giorni o meno
- 98 giorni o meno
Attributi opzionali
- The products shown in the image are representative. CAD data is not supported for some model numbers.
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.