VZ100, elettrovalvola a 3 vie, tenuta in elastomero, sistema metrico

VZ100, elettrovalvola a 3 vie, tenuta in elastomero, sistema metrico
SMC Solenoid Valve.
[Features]
· Low power consumption: 1.8 W DC
· Can also be used for vacuum applications up to -100 kPa

(i)Nota

  • Product images may be representative. Refer to the manufacturer's catalog for details.

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

VZ110-2D-M5-Q

Rubber Seal 3-Port / Direct Connection Type VZ100 Series Specifications

VZ100 Series external appearance

VZ100 Series external appearance

VZ100 Series body ported type external appearance

VZ100 Series body ported type external appearance

Type of actuation: JIS symbols for normally closed

Type of actuation: JIS symbols for normally closed

Type of actuation: JIS symbols for normally open

Type of actuation: JIS symbols for normally open

*R port on VZ120 is a supply port.

Usable Fluids Air
Operating Pressure Range See table below
Ambient and fluid temperature (°C) -10 to 50 (no freezing)
*1Response time (ms) 15 or less
Maximum Operating Frequency Hz 15
Flow Rate Characteristics See table below
Manual Operation Non-locking, push type
Lubrication Not required
Mounting Orientation Free
*2: Impact Resistance / Vibration Resistance: m/s2 300/50
Enclosure Dust-proof

*1: Based on JIS B 8374-1981 dynamic performance test. (Coil temperature of 20°C, at rated voltage, with no surge voltage suppressor)
*2: Impact resistance: No malfunctions after testing using a drop-type impact tester under the following conditions: in the axial direction and at a right angle to the main valve and armature in both energized and non-energized states (once for each condition state). (Initial value)
Vibration resistance: No malfunction occurred in 1 sweep test between 45 and 1,000 Hz. The test was performed in both energized and de-energized states in the axial and right angle directions of the main valve/armature. (Initial value)

Solenoid Specifications

Electrical Entry Grommet (G)/(H), L plug connector (L), M plug connector (M), DIN terminal (D)
Coil rated voltage (V) AC 50/60 Hz 100, 200, 110, 220
DC 24, 12
Allowable voltage fluctuation (%) -15% to +10% of rated voltage
*Power consumption (W)
[Current value (mA)]
DC 1.8 (with indicator light: 2.1) [24 V DC: 75 (with indicator light: 87.5)]
*Apparent power (VA)
[Current value (mA)]
AC Starting 4.5/50 Hz, 4.2/60 Hz
[100 V AC: 45/50 Hz, 42/60 Hz]
[200 V AC: 22.5 / 50 Hz, 21 / 60 Hz]
Holding 3.5 / 50 Hz, 3 / 60 Hz
[100 V AC: 35 / 50 Hz, 30 / 60 Hz]
[200 V AC: 17.5 / 50 Hz, 15 / 60 Hz]
Surge Voltage Suppressor DC: Diode, AC: ZNR
Indicator Light DC: LED (red), AC: Neon bulb

*At rated voltage.

Operating pressure range and weight

Valve Model Numbers Switching Method Operating Pressure Range Vacuum specification (MPa) Piping connection port diameter *Weight
g
MPa 1 (P) port 3 (R) port
Body Ported Types VZ110 N.C. 0 to 0.7 -27 kPa to 0.6 -100 kPa to 0 M5 ×; 0.8 70
VZ120 N.O. 0 to 0.5 -100 kPa to 0 -100 kPa to 0.4

*Weight for grommet type.

Flow Rate Characteristics Table

Valve Model Numbers Switching Method Piping connection port diameter Flow Rate Characteristics
Supply side
[N.C.: 1→2 (P→A)]
[N.O.: 3→2 (R→A)]
Exhaust side
[N.C.: 2→3 (A→R)]
[N.O.: 2→1 (A→P)]
C (dm3 / [s·bar]) b Cv C (dm3 / [s·bar]) b Cv
Body Ported Types VZ110 N.C. M5 ×; 0.8 0.11 0.026 0.023 0.19 0.071 0.042
VZ120 N.O. 0.19 0.071 0.042 0.13 0.18 0.031

Structure Drawing

VZ110 (N.C. type) structure drawing / JIS symbols

VZ110 (N.C. type) structure drawing / JIS symbols

VZ120 (N.O. type) structure drawing / JIS symbols

VZ120 (N.O. type) structure drawing / JIS symbols

Number Part name Material Note
(1) Body ZDC Platinum silver
(2) Push Rod Resin -
(3) EXH poppet NBR -
(4) N.C. Back-up spring SUS -
N.O. Poppet Spring
(5) Solenoid assembly Epoxy
SUS
VZ110
(6) Solenoid assembly Epoxy
SUS
VZ120
(7) O-ring NBR VZ300
VZ500
Common with series

Outline dimensional drawing

Body Ported Types

 

(Unit: mm)

 

Grommet (G) (H) VZ1□0-□G/H-M5 (-F) dimensional drawings

Grommet (G) (H) VZ1□0-□G/H-M5 (-F) dimensional drawings

 

(Unit: mm)

 

L plug connector (L) VZ1□0-□L□-M5 dimensional drawing

L plug connector (L) VZ1□0-□L□-M5 dimensional drawing

 

(Unit: mm)

 

M plug connector (M) VZ1□0-□M□-M5 dimensional drawing

M plug connector (M) VZ1□0-□M□-M5 dimensional drawing

 

(Unit: mm)

 

DIN terminal (D) VZ1□0-□D□-M5 dimensional drawing

DIN terminal (D) VZ1□0-□D□-M5 dimensional drawing

  • *Numbers inside boxes indicate with models indicator light / surge voltage suppressor.
  • *See the manufacturer's catalog for information other than the above.
Codice componente
VZ110-2D-M5-Q
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
A commutazione Tensione Valore CV Pressione nominale
(MPa)
Ingresso elettrico conduttore Spia / circuito di protezione Opzione

51.44 €

1 26 giorni 2 posizioni normalmente chiuso200 V AC0.0230–0.7Terminale DIN con connettoreAssenteAssente

Loading...

  1. 1

Informazioni di base

Tipo Elettrovalvole Applicazione Uso singolo Numero di attacchi Valvola a 3 porte
Metodo di installazione Diretto Caratteristiche Standard / Compatibile con basso vuoto / Senza lubrificazione / Bassa corrente Numero di solenoidi Tipo singolo
Stato allo spegnimento Autoreset (ritorno molla) Tipo di attacco tubo M Filettatura tubazione nominale M5
Tubazioni Collegamento diretto Tipo di azionamento Fungo a movimento lineare Con tenuta Guarnizione morbida
Interruttore manuale Senza bloccaggio Conformità CE

Si trova sulla pagina di VZ100, elettrovalvola a 3 vie, tenuta in elastomero, sistema metrico, il codice articolo è il seguente: VZ110-2D-M5-Q.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto VZ110-2D-M5-Q.

Tipologia prodotto

Codice componente
VZ110-1D-M5-Q
VZ110-1DO-M5-Q
VZ110-3D-M5-Q
VZ110-3DO-M5-Q
VZ110-3DZ-M5-Q
VZ110-4D-M5-F-Q
Codice componentePrezzo unitario standardQuantità minima d'ordineSconto volumi elevatiGiorni
spedizione standard
?
A commutazione Tensione Valore CV Pressione nominale
(MPa)
Ingresso elettrico conduttore Spia / circuito di protezione Opzione

48.89 €

1 26 giorni 2 posizioni normalmente chiuso100 V AC0.0230–0.7Terminale DIN con connettoreAssenteAssente

46.40 €

1 26 giorni 2 posizioni normalmente chiuso100 V AC0.0230–0.7Terminale DIN senza connettore / Terminale DIN, senza connettoreAssenteAssente

51.44 €

1 4 giorni 2 posizioni normalmente chiuso110 V AC0.0230–0.7Terminale DIN, con connettoreAssenteAssente

49.02 €

1 26 giorni 2 posizioni normalmente chiuso110 V AC0.0230–0.7Terminale DIN senza connettore / Terminale DIN, senza connettoreAssenteAssente

59.82 €

1 26 giorni 2 posizioni normalmente chiuso110 V AC0.0230–0.7Terminale DIN, con connettoreCon spia e circuito di protezioneAssente

53.18 €

1 26 giorni 2 posizioni normalmente chiuso220 V AC0.0230–0.7Terminale DIN con connettoreAssenteCon staffa con base

Supporto tecnico