• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

ASP, regolatore di flusso con valvola pilota unidirezionale (ASP630F-F04-10S)

ASP, regolatore di flusso con valvola pilota unidirezionale ASP630F-F04-10S
  • In Offerta

SMC

SMC

Dettagli del prodotto:

Codice articolo del costruttore: ASP630F-F04-10S

Marca: SMC

Prezzo: 75.18 €

Tempi di consegna: Stesso giorno


Dati Tecnici:

Materiale filettatura: [Inossidabile (EN 1.4401 equiv.)] Acciaio inox

Opzione controdado: blocco a forma dado

Temperature ambiente e fluido: -5～60 °C

Gamma di pressioni d'esercizio: 0.1～1 MPa

Portata: 1100 L/min


(i)Nota

  • Le immagini dei prodotti possono essere immagini rappresentative. Fare riferimento al catalogo per i dettagli

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

ASP630F-F04-10S

Speed Controller With Pilot Check Valve ASP Series Specifications

Speed Controller With Pilot Check Valve external appearance

Speed Controller With Pilot Check Valve external appearance

Example of drop prevention circuit

Example of drop prevention circuit

JIS symbol

JIS symbol

Fluid Air
Proof pressure 1.5 MPa
Maximum operating pressure 1 MPa
Minimum operating pressure 0.1 MPa
Pilot check valve operating pressure 50% or more of the operating pressure (however, must be 0.1 MPa or more)
Ambient and fluid temperature -5 to +60°C (no freezing)
Applicable tubing material Nylon, soft nylon, polyurethane

*Use caution regarding the maximum operating pressure when using soft nylon or polyurethane tubing.

Dimensional Drawing of This Product (Metric Size)

Speed Controller With Pilot Check Valve, dimensional drawing (metric size)

Speed Controller With Pilot Check Valve, dimensional drawing (metric size)

 

(Units: mm)

 

Model d T1 T2 H1 H2 D1 D2 D3 L1 L2 L3 L4*1 L5 A1*2 A2*2 M Weight
g
Max. MIN.
ASP330F-01-06S 6 R 1/8 M5 ×; 0.8 12 8 11.6 14.2 11.8 14 38.4 22.9 39.6 34.6 38.6 35.2 10.5 13.7 32
ASP330F-01-08S 8 15.2 15.8 44.7 28.2 38.9 33.9 18.7 35
ASP430F-02-06S 6 R 1/4 1/8 17 12 12.8 18.5 15 18 43.4 25.2 41.7 36.7 48.2 42.4 10.9 16.8 65
ASP430F-02-08S 8 15.2 19.7 46.4 28.2 18.7 68
ASP530F-03-08S 8 R 3/8 1/8 19 12 15.2 23 19.8 20.3 51.3 28.2 46.9 41.9 55.1 50 14.4 18.7 107
ASP530F-03-10S 10 18.5 23.1 54.1 32.6 20.8 110
ASP630F-04-10S 10 R 1/2 1/4 24 17 18.5 28.6 26.5 25.9 64.2 32.6 64.8 57.3 69.4 61.8 18.3 20.8 212
ASP630F-04-12S 12 20.9 66 34.4 21.8 215

*1: Reference dimensions.
*2: Reference dimensions of R thread after installation.

Dimensional Drawing of This Product (Inch Size)

Speed Controller With Pilot Check Valve dimensional drawing (inch size)

Speed Controller With Pilot Check Valve dimensional drawing (inch size)

 

(Units: inches)

 

Model d T1 T2 H1 H2 D1 D2 D3 L1 L2 L3 L4*1 L5 A1*2 A2*2 M Weight g
Max. MIN.
ASP330F-N01-07S 1/4 "NPT 1/8 10-32UNF 1/2 "8 13.2 14.2 11.8 15.8 42.2 25.6 38.9 33.9 38.6 35.1 10.5 17 35
ASP330F-N01-09S 5/16 "15.2 44.7 28.2 18.7
ASP430F-N02-07S 1/4 "NPT 1/4 NPT 1/8 11/16 "1/2 "13.2 18.5 15 18 43.9 25.6 41.7 36.7 48.2 42.6 10.9 17 68
ASP430F-N02-09S 5/16 "15.2 46.4 28.2 18.7
ASP530F-N03-09S 5/16 "NPT 3/8 NPT 1/8 19 1/2 "15.2 23 19.8 20.3 51.3 28.2 46.9 41.9 55.1 50.3 14.4 18.7 107
ASP530F-N03-11S 3/8 "18.5 23.1 54.1 32.6 20.8 116
ASP630F-N04-11S 3/8 "NPT 1/2 NPT 1/4 15/16 "11/16 "18.5 28.6 26.5 25.9 64.2 32.6 64.8 57.3 69.4 61.8 18.3 20.8 220
ASP630F-N04-13S 1/2 "21.7 26.5 66.3 34.7 21.8 230

*1: Reference dimensions.
*2: Reference dimensions of NPT thread after installation.

Needle Valve: Flow Rate Characteristics

ASP330F Needle Valve: Flow Rate Characteristics

ASP330F Needle Valve: Flow Rate Characteristics

ASP430F Needle Valve: Flow Rate Characteristics

ASP430F Needle Valve: Flow Rate Characteristics

ASP530F Needle Valve: Flow Rate Characteristics

ASP530F Needle Valve: Flow Rate Characteristics

ASP630F Needle Valve: Flow Rate Characteristics

ASP630F Needle Valve: Flow Rate Characteristics

*The flow rate characteristics are representative values.

Precautions

  • *This product cannot be used for accurate and precise intermediate stopping of the actuator. Due to the compressibility of air as a fluid, the actuator will continue to move until it reaches a position of pressure balance, even though the pilot check valve closes with an intermediate stop signal.
  • *This product cannot be used to hold a stop position for an extended period of time. Pilot check valves and actuators are not guaranteed for zero air leakage. Therefore, it is sometimes not possible to hold a stop position for an extended period of time. In the event that holding for an extended time is necessary, a mechanical means for holding should be devised.
  • *Consider the release of residual pressure. Actuators may move suddenly due to residual pressure, which can be dangerous during maintenance procedures.
  • *When used in a balance control circuit, there are instances in which the check valve cannot release, even if the pilot pressure is 50% of the operating pressure. In these cases, the pilot pressure should be the same as the operating pressure.
  • *For reference, SMC has conducted endurance tests in which ON, OFF operation of the check valve was performed at the maximum operating pressure, with a confirmed endurance of 10 million operations. Sine the tests were performed under limited conditions, use caution in evaluating the results.
  • *The check valve has a construction in which it is closed by the differential pressure generated when the inlet pressure (IN side) or outlet pressure (OUT side) solenoid valve is switched. Be aware that the check valve does not close completely and the outlet pressure (OUT side) may drop when the inlet pressure (IN side) drops gently and the differential pressure becomes smaller than the minimum operating pressure or cracking pressure.
  • *When free flow is selected for the ASP, chattering may occur if it is operated under conditions where there is low differential pressure on either side of the ASP. Chattering may be reduced by increasing the diameter of the piping or selecting an ASP with a smaller body size; however, if this is not effective, we recommend using a perfect spacer in place of the ASP.
  • *See the manufacturer's catalog for product information other than the above.
Numero di dati da visualizzare
30
45
60
  1. 1
Codice componente
ASP630F-F04-10S
Codice componenteRelativo a
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
Materiale filettatura Opzione controdado Temperature ambiente e fluido
(°C) 		Gamma di pressioni d'esercizio
(MPa) 		Portata
(L/min) 		Types of Screw Cylinder Side Types of Screw Tube Side Applicable Tube O.D. mm
(mm) 		Applicable Tube O.D. inch size
(inch) 		Body Size Pipe Connection Bore Dia. Cylinder Side Pipe Connection Bore Dia. Electromagnetic Valve Side Specifiche su ordinazione

Scheda dati

75.18 €

48.87 €

1 Stesso giorno

Stock

[Inossidabile (EN 1.4401 equiv.)] Acciaio inoxblocco a forma dado-5～600.1～11100RG10-1/2 standard1/21/4Assente

Loading...

  1. 1
 

Informazioni di base

Tipo Regolatore di velocità Profilo corpo principale Doppio Metodo di controllo Misurazione Uscita/Ingresso
Tipo giunto Filettatura maschio + attacchi a innesto rapido Materiale corpo principale PBT Ambiente d'esercizio, applicazioni Standard
Con manopola Resina

Si trova sulla pagina di ASP, regolatore di flusso con valvola pilota unidirezionale, il codice articolo è il seguente: ASP630F-F04-10S.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto ASP630F-F04-10S.

Configura

Ripristina

1Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Stock

Proprietà di base

  • Applicable Tube O.D. inch size(inch)

    • 1/2
    • 1/4
    • 3/8
    • 5/16

    Ripristina

  • Tipo

    • ASP
    • ASP630F

    Ripristina

  • Materiale filettatura

    • Ottone
      • Acciaio inox (EN 1.4305 Equiv.)
    • Inossidabile (EN 1.4401 equiv.)
      • Acciaio inox

    Ripristina

  • Opzione controdado

    • blocco di forma dado
    • blocco a forma dado

    Ripristina

  • Types of Screw Cylinder Side

    • NPT
    • R

    Ripristina

  • Types of Screw Tube Side

    • G
    • M
    • NPT
    • Rc
    • UNF

    Ripristina

  • Applicable Tube O.D. mm(mm)

    • 6
    • 8
    • 10
    • 12

    Ripristina

  • Body Size

    • 1/2 standard
    • 1/4 standard
    • 1/8 standard
    • 3/8 standard

    Ripristina

  • Pipe Connection Bore Dia. Cylinder Side

    • 1/2
    • 1/4
    • 1/8
    • 3/8

    Ripristina

  • Pipe Connection Bore Dia. Electromagnetic Valve Side

    • 1/4
    • 1/8
    • 5 × 0.8
    • 10-32

    Ripristina

  • Specifiche su ordinazione

    • Assente
    • Lubrificante: Vaselina
    • Lubrificante: vaselina bianca

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Filtrare per giorni di spedizione standard

    • Tutti gli articoli
    • Stesso giorno
    • 3 giorni o meno
    • 4 giorni o meno
    • 7 giorni o meno
    • 22 giorni o meno
    • 26 giorni o meno
    • 76 giorni o meno

    Ripristina

Attributi opzionali

Tipologia prodotto

Codice componente
ASP330F-01-08S
ASP330F-01-08S-J
ASP330F-01-08S-X12
ASP630F-F04-10S-J
ASP630F-F04-10S-X12
ASP630F-F04-12S
Codice componenteRelativo a Prezzo unitario standardQuantità minima d'ordineSconto volumi elevatiGiorni
spedizione standard
?		Materiale filettatura Opzione controdado Temperature ambiente e fluido
(°C) 		Gamma di pressioni d'esercizio
(MPa) 		Portata
(L/min) 		Types of Screw Cylinder Side Types of Screw Tube Side Applicable Tube O.D. mm
(mm) 		Applicable Tube O.D. inch size
(inch) 		Body Size Pipe Connection Bore Dia. Cylinder Side Pipe Connection Bore Dia. Electromagnetic Valve Side Specifiche su ordinazione

Scheda dati

38.39 €

1 3 giorni [Inossidabile (EN 1.4401 equiv.)] Acciaio inoxblocco a forma dado---RM8-1/8 standard1/85 × 0.8Assente

Scheda dati

38.39 €

1 22 giorni [Inossidabile (EN 1.4401 equiv.)] Acciaio inoxblocco di forma dado-5～ 600.1～ 1180RM8-1/8 standard1/85 × 0.8Assente

Scheda dati

39.56 €

1 26 giorni [Inossidabile (EN 1.4401 equiv.)] Acciaio inoxblocco a forma dado-5～ 600.1～ 1180RM8-1/8 standard1/85 × 0.8Lubrificante: Vaselina

Scheda dati

75.18 €

1 26 giorni [Inossidabile (EN 1.4401 equiv.)] Acciaio inoxblocco di forma dado-5～ 600.1～ 11.100RG10-1/2 standard1/21/4Assente

Scheda dati

80.40 €

1 26 giorni [Ottone] Acciaio inox (EN 1.4305 Equiv.)blocco a forma dado-5～ 60-1.100-------Lubrificante: vaselina bianca

Scheda dati

75.18 €

1 3 giorni [Inossidabile (EN 1.4401 equiv.)] Acciaio inoxblocco a forma dado-5～600.1～11190RG12-1/2 standard1/21/4Assente

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.