Filtro per gas puliti, filtro a cartuccia, serie SFA100/200/300 (SFA301-02)
Dettagli del prodotto:
Codice articolo del costruttore: SFA301-02
Marca: SMC
Prezzo: 369.00 €
Tempi di consegna: 26 giorni
Dati Tecnici:
Tipo: -
Qualità aria compressa: General Dry Air
Livello di filtrazione: 0.01μm
Portata aria trattamento: 140 L/min
Tipo di collegamento: [NPT] NPT femmina
(i)Nota
- ■ SMC Product Line
Webpages for products currently without individual pages on this site will be released on an ad-hoc basis.
Click here for a quotation or to make an order if you have a model number.
■ Products Planned for Online Release
Air cylinder-related product pages will be released on this site on an ad-hoc basis.
CQ2, MG types, etc., are already available. Click here to check.
*Vacuum equipment, FRLs, solenoid valves, etc., will also be released on dedicated pages on this site on an ad-hoc basis.
*The information above is correct as of December 2018. - See catalog for specification details.
- Product images may be representative images. Refer to the catalog for details.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
SFA301-02
Clean Gas Filter: Cartridge Type / Disc Type, SFA100/SFA200/SFA300 Series Specifications
SFA103 external appearance
SFA200 external appearance
SFA302 external appearance
| Applicable Fluid | Air, nitrogen | |
|---|---|---|
| Operating Pressure*1 | MAX. 0.99 MPa, Vacuum 1.3 ×; 10-6 kPa | |
| Operating Temperature | 5 to 80℃ | |
| Element Proof Differential Pressure | MAX. 0.1 MPa | |
| Element Reverse Differential Pressure | MAX. 0.05 MPa | |
| Filtration*2 | 0.01 μm (filtration efficiency 99.99%) | |
| Main Material | Case | SUS316 (Interior/Exterior: Electrolytic polishing) |
| Filtration Medium | PTFE membrane | |
| Seal | Fluoroelastomer (FKM) | |
| Packaging | Antistatic sealed double package | |
*1: The maximum operating pressure is 0.99 MPa since this product does not conform to the High Pressure Gas Safety Law (Japan). Ensure that, if 0.1 MPa is exceeded, there is no pressure fluctuation during use.
*2: Measured under manufacturer's specified conditions.
Model
| Model | Rated Flow L/min (ANR)*1 | Connection | Filtration Area cm2 | Element Part No.*2 | Weight (kg) |
|---|---|---|---|---|---|
| SFA100-02 | 26 | Rc 1/4 (female thread) | 13.85 | ED001S-X10V | 0.34 |
| SFA101-02 | NPT 1/4 (female thread) | ||||
| SFA200-02 | 70 | Rc 1/4 (female thread) | 33.18 | ED101S-X10V | 0.44 |
| SFA201-02 | NPT 1/4 (female thread) | ||||
| SFA300-02 | 140 | Rc 1/4 (female thread) | 56.75 | ED201S-X10V | 0.66 |
| SFA301-02 | NPT 1/4 (female thread) | ||||
| SFA102-02 | 26 | TSJ 1/4 Tube, Swage Joint | 13.85 | ED001S-X10V | 0.38 |
| SFA202-02 | 70 | 33.18 | ED101S-X10V | 0.49 | |
| SFA302-02 | 140 | 56.75 | ED201S-X10V | 0.70 | |
| SFA103-02 | 26 | UOJ1/4 Union O-Ring, Joint | 13.85 | ED001S-X10V | 0.42 |
| SFA203-02 | 70 | 33.18 | ED101S-X10V | 0.53 | |
| SFA303-02 | 140 | 56.75 | ED201S-X10V | 0.75 |
*1: At inlet pressure of 0.7 MPa and pressure drop of 0.02 MPa.
*2: Contents of diagram numbers (3) to (7) are included in the element part no. (refer to diagrams).
Product Diagram
Cartridge Type / Disc Type, SFA100/SFA200/SFA300 Series diagram
| Number | Part name | Material | Note |
|---|---|---|---|
| 1 | Case | SUS 316 | Electrolytic polishing (interior/exterior) |
| 2 | V Clamp | SUS304 | - |
| 3 | Holder 1 | Polyester | Element |
| 4 | Holder 2 | ||
| 5 | Filtration Medium | PTFE | |
| 6 | Packing | FKM | |
| 7 | V packing |
Product Outline Dimensional Drawing
SFA100-02/SFA101-02/SFA200-02/SFA201-02/SFA300-02/SFA301-02 dimensional drawings
(Unit: mm)
| Model | Connection | (A) | (øB) |
|---|---|---|---|
| SFA100-02 | Rc 1/4 | 46 | 76 |
| SFA101-02 | NPT 1/4 | ||
| SFA200-02 | Rc 1/4 | 51 | 96 |
| SFA201-02 | NPT 1/4 | ||
| SFA300-02 | Rc 1/4 | 59 | 120 |
| SFA301-02 | NPT 1/4 |
(): Reference dimensions
SFA102-02/SFA202-02/SFA302-02 dimensional drawings
(Unit: mm)
| Model | Connection | (A) | (øB) |
|---|---|---|---|
| SFA102-02 | TSJ 1/4 (Tube Swage Joint) | 89 | 76 |
| SFA202-02 | 93 | 96 | |
| SFA302-02 | 101 | 120 |
(): Reference dimensions
(Unit: mm)
SFA103-02/SFA203-02/SFA303-02 dimensional drawing
(Unit: mm)
| Model | Connection | (A) | (øB) |
|---|---|---|---|
| SFA103-02 | UOJ 1/4 (Union O-Ring Joint) | 117 | 76 |
| SFA203-02 | 122 | 96 | |
| SFA303-02 | 130 | 120 |
(): Reference dimensions
Product Flow Rate Characteristics (Fluid: Compressed Air / Inlet Temperature: 20°C)
SFA10□ flow rate characteristics
SFA20□ flow rate characteristics
SFA30□ flow rate characteristics
Precautions
- *Ensure that you read the specific product precautions prior to use.
- *Confirm the specifications. The Clean Gas Filter is designed for use with compressed air and nitrogen gas only. Do not use with fluids (gases) other than those stated in the specifications, and do not exceed the specified ranges for pressure or temperature, as this will cause damage, etc.
- *Select a product according to the maximum consumption flow rate. When using compressed air for air blow applications, etc., calculate the maximum volume of air that will be consumed before selecting the SF□ series product size. (Using a product that exceeds the maximum air flow and running excessive compressed air can cause the cleanliness of the compressed air to deteriorate and/or damage the element.)
- *Set the processing flow rate with an initial pressure drop of 0.02 MPa or less. If the initial pressure drop is set too high, the service life will be shorter due to clogging.
- *See the manufacturer's catalog for product information other than the above.
- *Product pictures are example representations for the product series. Please be aware that actual product specifications may be different.
Codice componente
|
|---|
| SFA301-02 |
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | Tipo | Qualità aria compressa | Livello di filtrazione | Portata aria trattamento (L/min) | Tipo di collegamento | Filettatura tubazione nominale | Ambiente d'esercizio | Rubinetto di scarico | Materiale bicchierino | Protezione vaschetta | Gamma di pressioni d'esercizio (MPa) | Compatible Models | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
369.00 € | 1 | 26 giorni | - | General Dry Air | 0.01μm | 140 | [NPT] NPT femmina | 1/4 | Clean Room Specifications (Prevent dust) | NA | [Metallo] Lega di alluminio | NA | null～0.99 | - |
Loading...
Si trova sulla pagina di Filtro per gas puliti, filtro a cartuccia, serie SFA100/200/300, il codice articolo è il seguente: SFA301-02.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto SFA301-02.
Configura
Proprietà di base
-
Tipo
- Componenti annessi (elemento di ricambio)
- Componenti annessi (elemento di ricambio)
-
Compatible Models
- SFA10□-02
- SF30□-20
-
Tipo
- ED□S-X10V
- SFA100
- SFA200
- SFA300
-
Qualità aria compressa
- General Dry Air
-
Livello di filtrazione
- 0.01μm
-
Portata aria trattamento(L/min)
-
Tipo di collegamento
- NPT
- Tubazioni ad attacco rapido
- TSJ
- UOJ
- NPT
-
Filettatura tubazione nominale
- 1/4
-
Ambiente d'esercizio
- Clean Room Specifications (Prevent dust)
-
Rubinetto di scarico
- NA
-
Materiale bicchierino
- Metallo
- Metallo
-
Protezione vaschetta
- NA
-
Filtrare per tipo dati CAD
- 2D
- 3D
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 4 giorni o meno
- 26 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Tipologia prodotto
| Codice componente |
|---|
| SFA100-02 |
| SFA101-02 |
| SFA102-02 |
| SFA103-02 |
| SFA302-02 |
| SFA303-02 |
| Codice componente | Prezzo unitario standard | Quantità minima d'ordine | Sconto volumi elevati | Giorni spedizione standard ? | Tipo | Qualità aria compressa | Livello di filtrazione | Portata aria trattamento (L/min) | Tipo di collegamento | Filettatura tubazione nominale | Ambiente d'esercizio | Rubinetto di scarico | Materiale bicchierino | Protezione vaschetta | Gamma di pressioni d'esercizio (MPa) | Compatible Models |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
282.69 € | 1 | 4 giorni | - | General Dry Air | 0.01μm | 26 | [Tubazioni ad attacco rapido] Tubo ad azione singola | 1/4 | Clean Room Specifications (Prevent dust) | NA | [Metallo] Lega di alluminio | NA | null～0.99 | - | ||
282.69 € | 1 | 26 giorni | - | General Dry Air | 0.01μm | 26 | [NPT] NPT femmina | 1/4 | Clean Room Specifications (Prevent dust) | NA | [Metallo] Lega di alluminio | NA | null～0.99 | - | ||
376.90 € | 1 | 26 giorni | - | General Dry Air | 0.01μm | 26 | TSJ | 1/4 | Clean Room Specifications (Prevent dust) | NA | [Metallo] Lega di alluminio | NA | null～0.99 | - | ||
376.60 € | 1 | 26 giorni | - | General Dry Air | 0.01μm | 26 | UOJ | 1/4 | Clean Room Specifications (Prevent dust) | NA | [Metallo] Lega di alluminio | NA | null～0.99 | - | ||
463.34 € | 1 | 26 giorni | - | General Dry Air | 0.01μm | 140 | TSJ | 1/4 | Clean Room Specifications (Prevent dust) | NA | [Metallo] Lega di alluminio | NA | null～0.99 | - | ||
463.32 € | 1 | 26 giorni | - | General Dry Air | 0.01μm | 140 | UOJ | 1/4 | Clean Room Specifications (Prevent dust) | NA | [Metallo] Lega di alluminio | NA | null～0.99 | - |
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.