• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

LLB, Sistema modulare per aria trattata (LLB3-1-VSF1)

LLB, Sistema modulare per aria trattata LLB3-1-VSF1

SMC

SMC

Dettagli del prodotto:

Codice articolo del costruttore: LLB3-1-VSF1

Marca: SMC

Prezzo: 556.34 €

Tempi di consegna: 26 giorni


Dati Tecnici:

Tipo: -

Livello di filtrazione: 0.01μm

Portata aria trattamento: 100 L/min

Tipo di collegamento: [Tubazioni ad attacco rapido] Tubo a innesto rapido (gomito)

Filettatura tubazione nominale: -


(i)Nota

  • ■ SMC Product Line
    Webpages for products currently without individual pages on this site will be released on an ad-hoc basis.
    Click here for a quotation or to make an order if you have a model number.

    ■ Products Planned for Online Release
    Air cylinder-related product pages will be released on this site on an ad-hoc basis.
    CQ2, MG types, etc., are already available. Click here to check.
    *Vacuum equipment, FRLs, solenoid valves, etc., will also be released on dedicated pages on this site on an ad-hoc basis.
    *The information above is correct as of December 2018.
  • See catalog for specification details.
  • Product images may be representative images. Refer to the catalog for details.

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

LLB3-1-VSF1

Clean Air Module, LLB Series Specifications

LLB3 external appearance

LLB3 external appearance

LLB4 external appearance

LLB4 external appearance

Clean Air Module Common Specifications

Model LLB3 LLB4
Applicable Fluid Clean Air, N2gas (Inlet air conditions equivalent to ISO 8573-1 and quality class 1.4.1 to 1.6.1)*3
Maximum Operating Pressure 0.7 MPa
Set Pressure 0.05 to 0.4 MPa
Withstand Pressure 1.0 MPa
Working Fluid Temperature 5℃ to 45°C (no freezing)
*Guaranteed range of digital flow switch: 15 to 35°C.
Ambient Temperature
Flow Rate Range*1 5 to 100 L/min (ANR) 50 to 500 L/min (ANR)
Filtration*2 0.01 μm (filtration efficiency 99.99%)
Fluid Contact Space - Grease-free, silicone-free
Material Body PBT
Module Connection Packing FKM
Single-Action Fitting Packing EPDM

*1: The maximum flow rate varies depending on set pressure. Refer to "Flow Rate Characteristics" graph for details.
*2: Measured under manufacturer's specified conditions.
*3: Refer to Operating Environment (catalog p. 344).

Digital Flow Switch Unit Specifications

Model LLB3 LLB4
Detection Type Heat type
Measured Flow Rate Range 5 to 100 L/min 50 to 500 L/min
Minimum Unit Setting 1 L/min 5 L/min
Accumulated Pulse Flow Rate Exchange Value (Pulse Width: 50 [ms]) 1 L/pulse 5 L/pulse
Accumulated Flow Rate Range 0 to 999,999 L
Linearity ±5% F.S. or less (15 to 35°C, 25°C reference)
Repeatability ±2% F.S. or less
Temperature Characteristics ±5% F.S. or less (15 to 35°C, 25°C reference)
Specifications Switch Output - NPN or PNP open collector output
Maximum Load Current 80 mA
Maximum Applied Voltage 30 V DC (at NPN output)
Internal Voltage Drop NPN output: 1 V or less (at 80 mA) PNP output: 1.5 V or less (at 80 mA)
Analog Output Voltage Output Output voltage 1 to 5 V
Allowable load resistance 100 kΩ or more
Current Output Output current 4 to 20 mA
Allowable load resistance 300Ω or less (12 V DC), 600Ω or less (24 V DC)
Status LEDs When turned ON, OUT1: Green, OUT2: Red (where output is analog, OUT1 only)
Response Time 1S or less
Power Supply Voltage 12 to 24 V DC (Ripple ±10% or less)
Current Consumption 160 mA or less 170 mA or less
Withstand Voltage 1,000 V AC, for 1 minute between external terminal and case
Insulation Resistance 50 MΩ or more (500 V DC measured with megohmmeter) between external terminal and case
Noise Resistance 1,000 V p-p, pulse width 1 μs, rise time 1 ns
Lead Wire Lead wire with connector
Enclosure IP65
Fluid Contact Space Material Mesh SUS
Sensor Housing PBT
Sensor Lead glass (RoHS-exempt material)
Ptlr
FeNl

ON/OFF Valve Unit Specifications

Model LLB3 LLB4
Pilot Pressure (ON/OFF Valve Operating Pressure) 0.4 to 0.5 MPa
Back Pressure 0.4 MPa or less
Valve Type N.C.
Orifice Diameter 4 mm 8 mm
Cv Factor 0.35 1.7
Fluid Contact Space Material Diaphragm PTFE
Valve Leakage 1 cm3/min (ANR) or less

Filter Unit Specifications

Model LLB3 LLB4
Filtration*1 0.01 μm (filtration efficiency 99.99%)
Element Proof Differential Pressure*2 0.5 MPa
Processing Flow Rate Up to 100 L/min (ANR) Up to 500 L/min (ANR)
Fluid Contact Space Material Filter Case PC
Hollow Fiber PP
Potting PU

*1: Measured under manufacturer's specified conditions.
*2: This means that the element will not break at 0.5 MPa. Refer to installation precautions prior to use.

Pressure Reducing Valve Unit Specifications

  • Relief mechanism: LLB3, LLB4 / Non-relief
  • Fluid contact space material (Diaphragm): LLB3, LLB4 / FKM

Throttle Valve Unit Specifications

  • Cv factor: LLB3 / 0.28, LLB4 / 1.4
  • Number of needle rotations: LLB3 / 8 rotations, LLB4 / 10 rotations
  • Fluid contact space material (needle): LLB3, LLB4 / SUS

Product Outline Dimensional Drawing

 

(Unit: mm)

 

LLB3-1-P□R□V□SF dimensional drawing

LLB3-1-P□R□V□SF dimensional drawing

*Cannot be used. If a pressure gauge, etc. is screwed in, there is risk of damage.

 

(Unit: mm)

 

LLB4-1-P□R□V□SF dimensional drawing

LLB4-1-P□R□V□SF dimensional drawing

*Cannot be used. If a pressure gauge, etc. is screwed in, there is risk of damage.

Component Parts

LLB Series component parts

LLB Series component parts

No. Description Note
1 Clean regulator ass’y - -
2 Pressure outlet port ass’y - -
3 ON/OFF valve ass’y / Air operated valve Without flow adjuster -
With flow adjuster -
ON/OFF valve ass’y / Manual operation valve - -
4 Throttle valve ass’y - -
5 Digital flow switch ass’y 5 to 100 L/min With L-type connector
With lead wire (3 m)
50 to 500 L/min
6 Clean air filter ass’y øWith 10-mm diameter fitting With single-action fitting
Rc 1/4 Threaded type
NPT 1/4
øWith 10-mm diameter pipe fitting, with differential pressure gauge With single-action fitting
Rc 1/4, with differential pressure gauge Threaded type
NPT 1/4, with differential pressure gauge
Replacement element -
7 End plate ass’y øWith 10-mm diameter fitting With single-action fitting
Rc 1/4 Threaded type
NPT 1/4
øWith 12-mm diameter fitting With single-action fitting
Rc 3/8 Threaded type
NPT 3/8

*Each module comes with 2 connection fittings.

Product Flow Rate Characteristics

Standard type (100 L/min)

LLB3-1-P1R1VSF flow rate characteristics graph (number of needle rotations)

LLB3-1-P1R1VSF flow rate characteristics graph (number of needle rotations)

LLB3-1-P1R1VSF flow rate characteristics graph (fluid pressure)

LLB3-1-P1R1VSF flow rate characteristics graph (fluid pressure)

High Flow Type (500 L/min)

LLB4-1-P1R1VSF flow rate characteristics graph (number of needle rotations)

LLB4-1-P1R1VSF flow rate characteristics graph (number of needle rotations)

LLB4-1-P1R1VSF flow rate characteristics graph (fluid pressure)

LLB4-1-P1R1VSF flow rate characteristics graph (fluid pressure)

Test Conditions

Product models: LLB3-1-P1R1VSF and LLB4-1-P1R1VSF
Supplied pressure: 0.5 MPa
Pressure setting conditions and measured position: Pressure is set by turning the regulator knob with ON/OFF valve turned off.
Pressure is measured at the pressure outlet port.

Installation diagram based on test conditions

Installation diagram based on test conditions

Precautions

  • *Ensure that you read the specific product precautions prior to use.
  • *See the manufacturer's catalog for product information other than the above.
  • *Product pictures are example representations for the product series. Please be aware that actual product specifications may be different.

Design and Selection

  • *Confirm the specifications: Give due consideration to the operating conditions such as the application, fluid and environment, and use within the operating ranges specified in the manufacturer's catalog.
  • *Ensure sufficient maintenance space: Provide the required space for maintenance inspection.
  • *Fluid pressure range: Supplied fluid pressure must be within the operating pressure range specified in the manufacturer's catalog.

Mounting

  • *If air leakage increases, or equipment does not operate correctly, stop use immediately.
  • *After mounting, perform suitable function and leak testing to confirm that the mounting is correct.
Numero di dati da visualizzare
30
45
60
  1. 1
Codice componente
LLB3-1-VSF1
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
Tipo Livello di filtrazione Portata aria trattamento
(L/min) 		Tipo di collegamento Filettatura tubazione nominale Ambiente d'esercizio Rubinetto di scarico Materiale bicchierino Protezione vaschetta Gamma di pressioni d'esercizio
(MPa) 		Diametro tubo di collegamento Specifications Digital Flow Switch Pressure Reducing Valve ON/OFF Valve Throttle valve Compatible Models

556.34 €

1 26 giorni -0.01μm100[Tubazioni ad attacco rapido] Tubo a innesto rapido (gomito)-Clean Room Specifications (Prevent dust)NA[Metallo] MetalloNAnull～0.7φ10Con filtro con pressostato differenziale con indicatoreAssenteNessunoCon azionamento pneumaticoSì-

Loading...

  1. 1
 

Informazioni di base

Qualità aria compressa General Dry Air

Si trova sulla pagina di LLB, Sistema modulare per aria trattata, il codice articolo è il seguente: LLB3-1-VSF1.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto LLB3-1-VSF1.

Configura

Ripristina

1Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Tipo

    • Standard
      • Standard
    • Componenti annessi (dispositivi ausiliari)
      • Clean Air Filter Assembly
      • Clean Regulator Assembly
      • Digital Flow Switch Assembly
      • End Plate Assembly
      • ON/OFF Valve Assembly, Air-operated Valve
      • ON/OFF Valve Assembly, Manual Operation Valve
      • Pressure Outlet Port Assembly
      • Throttle Valve Assembly

    Ripristina

  • Filettatura tubazione nominale

    • 1/4
    • 3/8

    Ripristina

  • Compatible Models

    • LLB3
    • LLB4

    Ripristina

  • Tipo

    • LLB3-1-□
    • LLB3-2-□
    • LLB3-2N-□
    • LLB4-1-□
    • LLB4-3-□
    • LVB2-□
    • LVB3-□
    • LVB4-□

    Ripristina

  • Livello di filtrazione

    • NA
    • 0.01μm

    Ripristina

  • Portata aria trattamento(L/min)

    • 100
    • 500

    Ripristina

  • Tipo di collegamento

    • NPT
      • NPT
    • Tubazioni ad attacco rapido
      • Tubo a innesto rapido (gomito)
      • Tubo ad azione singola

    Ripristina

  • Ambiente d'esercizio

    • Clean Room Specifications (Prevent dust)

    Ripristina

  • Rubinetto di scarico

    • NA

    Ripristina

  • Materiale bicchierino

    • Metallo
      • Metallo

    Ripristina

  • Protezione vaschetta

    • NA

    Ripristina

  • Diametro tubo di collegamento

    • φ10
    • φ12

    Ripristina

  • Specifications

    • Da 5 a 100 l/min
    • Da 50 a 500 l/min
    • Con controllo della portata
    • Con filtro
    • Con filtro con pressostato differenziale con indicatore
    • Con manometro pressione differenziale
    • Senza regolatore di portata

    Ripristina

  • Digital Flow Switch

    • Collettore aperto NPN 1 uscita + analogico (da 1 a 5 V)
    • Collettore aperto PNP 1 uscita + analogico (da 1 a 5 V)
    • Collettore aperto NPN 1 uscita + analogico (da 4 a 20 mA)
    • Collettore aperto PNP 1 uscita + analogico (da 4 a 20 mA)
    • Collettore aperto NPN 2 uscite
    • Collettore aperto PNP 2 uscite
    • Assente

    Ripristina

  • Pressure Reducing Valve

    • Con valvola di riduzione della pressione
    • Con valvola di riduzione pressione + con gruppo raccordo di uscita pressione
    • Nessuno

    Ripristina

  • ON/OFF Valve

    • Assente
    • Con azionamento pneumatico
    • Con regolatore di portata ad azionamento pneumatico
    • Valvola a comando manuale (con leva di bloccaggio)

    Ripristina

  • Throttle valve

    • Nessuno
    • Sì

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Filtrare per giorni di spedizione standard

    • Tutti gli articoli
    • 4 giorni o meno
    • 26 giorni o meno
    • 98 giorni o meno

    Ripristina

Attributi opzionali

Tipologia prodotto

Codice componente
LLB3-1-P1RV1F
LLB3-1-P2SF
LLB3-1-P3R1VSF
LLB3-2-F
LLB3-2-P2R1VSF1
LLB3-2-P4F
Codice componentePrezzo unitario standardQuantità minima d'ordineSconto volumi elevatiGiorni
spedizione standard
?		Tipo Livello di filtrazione Portata aria trattamento
(L/min) 		Tipo di collegamento Filettatura tubazione nominale Ambiente d'esercizio Rubinetto di scarico Materiale bicchierino Protezione vaschetta Gamma di pressioni d'esercizio
(MPa) 		Diametro tubo di collegamento Specifications Digital Flow Switch Pressure Reducing Valve ON/OFF Valve Throttle valve Compatible Models

1,220.34 €

1 26 giorni -0.01μm100[Tubazioni ad attacco rapido] Tubo a innesto rapido (gomito)-Clean Room Specifications (Prevent dust)NA[Metallo] MetalloNAnull～0.7φ10Con filtroCollettore aperto NPN 1 uscita + analogico (da 1 a 5 V)Con valvola di riduzione della pressioneCon regolatore di portata ad azionamento pneumaticoNessuno-

840.90 €

1 26 giorni -0.01μm100[Tubazioni ad attacco rapido] Tubo a innesto rapido (gomito)-Clean Room Specifications (Prevent dust)NA[Metallo] MetalloNAnull～0.7φ10Con filtroCollettore aperto PNP 1 uscita + analogico (da 1 a 5 V)NessunoAssenteSì-

1,310.03 €

1 26 giorni -0.01μm100[Tubazioni ad attacco rapido] Tubo a innesto rapido (gomito)-Clean Room Specifications (Prevent dust)NA[Metallo] MetalloNAnull～0.7φ10Con filtroCollettore aperto NPN 2 usciteCon valvola di riduzione pressione + con gruppo raccordo di uscita pressioneCon azionamento pneumaticoSì-

261.53 €

1 26 giorni -0.01μm100[Tubazioni ad attacco rapido] Tubo ad azione singola1/4Clean Room Specifications (Prevent dust)NA[Metallo] MetalloNAnull～0.7-Con filtroAssenteNessunoAssenteNessuno-

1,384.35 €

1 26 giorni -0.01μm100[Tubazioni ad attacco rapido] Tubo ad azione singola1/4Clean Room Specifications (Prevent dust)NA[Metallo] MetalloNAnull～0.7-Con filtro con pressostato differenziale con indicatoreCollettore aperto PNP 1 uscita + analogico (da 1 a 5 V)Con valvola di riduzione pressione + con gruppo raccordo di uscita pressioneCon azionamento pneumaticoSì-

761.39 €

1 26 giorni -0.01μm100[Tubazioni ad attacco rapido] Tubo ad azione singola1/4Clean Room Specifications (Prevent dust)NA[Metallo] MetalloNAnull～0.7-Con filtroCollettore aperto PNP 2 usciteNessunoAssenteNessuno-

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.