ARM1000 / 2000, regolatore serie manifold (ARM1000-1B1-01G)
Dettagli del prodotto:
Codice articolo del costruttore: ARM1000-1B1-01G
Marca: SMC
Prezzo: 31.52 €
Tempi di consegna: 26 giorni
Dati Tecnici:
Lato mandata, tipo di collegamento: Rc
Lato mandata, diam. collegamento: 1/8
Lato controllo, tipi di collegamento: Rc
Manometro: [Con manometro] Con manometro
Size of Body: 1,000
(i)Nota
- ■ SMC Product Line
Webpages for products currently without individual pages on this site will be released on an ad-hoc basis.
Click here for a quotation or to make an order if you have a model number.
■ Products Planned for Online Release
Air cylinder-related product pages will be released on this site on an ad-hoc basis.
CQ2, MG types, etc., are already available. Click here to check.
*Vacuum equipment, FRLs, solenoid valves, etc., will also be released on dedicated pages on this site on an ad-hoc basis.
*The information above is correct as of December 2018. - See the catalog for specification details.
- Product images may be representative images. Refer to the catalog for details.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
ARM1000-1B1-01G
ARM1000/2000 Series Manifold Regulator Specifications
ARM2000-4B2 external appearance
ARM2000-4A2-01G external appearance
Common IN (left) / individual IN (right) JIS symbols
Conceptual diagram of connection variants
| Ambient and fluid temperature | -5 to +60°C (no freezing) |
|---|---|
| Fluid | Air |
| Cracking pressure (valve) | 0.02 MPa |
| Structure | Relieving type |
Port Size / Weight
| Model | Piping specifications | Connection port size | Weight (g) | ||
|---|---|---|---|---|---|
| IN side | OUT side | Total weight (n: stations) | Regulator (except manifold) | ||
| ARM1000 | Common IN | 1/8 | 1/8 | (80 ×; n) + 23 | 57 |
| Individual IN | 1/8 | 1/8 | (79 ×; n) +25 | ||
| ARM2000 | Common IN | 1/4 | 1/8 | (188 ×; n) +43 | 136 |
| Individual IN | 1/8 | 1/8 | (187 ×; n) +45 | ||
Diagram (Individual IN)
Individual IN Diagram
| Number | Part name | Material | Note |
|---|---|---|---|
| 1 | Main body | Die-cast aluminum | Chromate treatment |
| 2 | Manifolds | Aluminum alloy | Chromate treatment |
| 3 | Valve guide | Brass | - |
| 4 | Piston | Brass | - |
| 5 | Pressure regulator spring | Steel wire | Zinc chromate |
| 6 | Adjusting screw | Structural steel | Electroless nickel plating |
| Number | Part name | Material |
|---|---|---|
| 7 | Valve | Brass, HNBR |
| 8 | Valve spring | Stainless steel |
| 9 | Valve retainer | Polyacetal |
| 10 | O-ring | NBR |
| 11 | O-ring | NBR |
Setting
- 1.Make sure to check the inlet pressure before setting the outlet pressure. Turning the pressure adjustment handle clockwise increases the outlet pressure and turning it counterclockwise decreases the pressure. (To set the pressure, do so in the direction of pressure)
- 2.The outlet pressure range must be 85% or less than the inlet pressure.
Flow Characteristics (Representative Values)
Conditions: inlet pressure = 0.7 MPa
ARM1000 flow rate characteristics graph
ARM2000 flow rate characteristics graph
Pressure Characteristics (Representative Values)
Conditions (initial settings): inlet pressure 0.7 MPa, outlet pressure 0.2 MPa, flow rate 10 L/min (ANR)
ARM1000 pressure characteristics graph
ARM2000 pressure characteristics graph
Dimensions
(Unit: mm)
ARM1000/2000 Series dimensional drawing
External Dimensions Table
(Unit: mm)
| Model | Symbol | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | B | C | D | E | F | G | H | J | K | M | P | Q | R | |
| ARM1000 | 4.5 | 25 | 34 | 21 | 18 | 56 | 16 | 9 | 18 | 19 | 52 | 9 | 11.5 | 4.8 |
| ARM2000 | 4.5 | 34.5 | 43 | 28 | 27 | 70 | 20 | 11.5 | 24 | 28 | 66 | 11.5 | 16.5 | 4.8 |
Dimensions by the Number of Stations
(Unit: mm)
| Model | Symbol | Manifold stations (n) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | ||
| ARM1000 | L1 | 36 | 55 | 74 | 93 | 112 | 131 | 150 | 169 | 188 | 207 |
| L2 | 27 | 46 | 65 | 84 | 103 | 122 | 141 | 160 | 179 | 198 | |
| ARM2000 | L1 | 48 | 76 | 104 | 132 | 160 | 188 | 216 | 244 | 272 | 300 |
| L2 | 39 | 67 | 95 | 123 | 151 | 179 | 207 | 235 | 263 | 291 | |
Precautions
Mounting/Adjustment
- *In the case of the common IN type, supply pressure from the two IN ports from both ends. Failure to observe this procedure could lead to an excessive pressure drop.
- *Release the lock to adjust the pressure. After the adjustment, engage the lock. Failure to observe this procedure could damage the handle or cause the outlet pressure to fluctuate.
Lock operating method
Loosen the handle locking nut to release the lock, and tighten it to lock it. - *The attached reverse flow mechanism is placed between the electromagnetic valve and actuator and can be used as a check regulator.
Maintenance
- *Make sure to perform a periodic inspection of the pressure gauge when it is used by installing it between a solenoid valve and an actuator, etc. Because of the possibility of creating sudden pressure fluctuations, the durability of the product could be shortened. Under certain circumstances, the use of an electronic type pressure gauge is recommended.
Other precautions
- *Be sure to read the safety precautions as well as the common precautions in the manufacturer's catalog before use.
- *The images for this product are representative images. *The product shown may differ from the actual product.
- *See the manufacturer's catalog for information other than the above.
Codice componente
|
|---|
| ARM1000-1B1-01G |
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | Lato mandata, tipo di collegamento | Lato mandata, diam. collegamento | Lato controllo, tipi di collegamento | Manometro | Size of Body | Set Pressure | Connected Number | Piping Specification | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
31.52 € | 1 | 26 giorni | Rc | 1/8 | Rc | [Con manometro] Con manometro | 1,000 | 0.05–0.7MPa | 1 stazione | IN: individuale, OUT: lato collettore |
Loading...
Informazioni di base
| Regolatore, valvola di sovrapressione | Regolatore | Regolatore | Profilo a collettore | Liquido applicabile | Aria |
|---|---|---|---|---|---|
| Profilo | Standard | Ambiente d'esercizio | Standard | Meccanismo di scarico | Sfiato |
| Funzione corrente contraria | Disponibile | Gamma di pressioni d'esercizio(MPa) | null::0.8 | Lato di controllo, diametro collegamento | 1/8 |
Si trova sulla pagina di ARM1000 / 2000, regolatore serie manifold, il codice articolo è il seguente: ARM1000-1B1-01G.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto ARM1000-1B1-01G.
Configura
Proprietà di base
-
Tipo
- ARM1000-□A1□
- ARM1000-□A2□
- ARM1000-□B1□
- ARM1000-□B2□
- ARM2000-□A1□
- ARM2000-□A2□
- ARM2000-□B1□
- ARM2000-□B2□
-
Lato mandata, tipo di collegamento
- Rc
- NPT
-
Lato mandata, diam. collegamento
-
Lato controllo, tipi di collegamento
- Rc
- NPT
-
Manometro
- Non in dotazione
- Con manometro
- Non in dotazione
-
Size of Body
-
Set Pressure
- 0.05–0.2MPa
- 0.05–0.7 MPa
- 0.05–0.7MPa
-
Connected Number
-
Piping Specification
-
Filtrare per tipo dati CAD
- 2D
- 3D
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 4 giorni o meno
- 26 giorni o meno
- 31 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Tipologia prodotto
| Codice componente |
|---|
| ARM1000-10B1-01G |
| ARM1000-10B2-01 |
| ARM1000-1A1-01 |
| ARM1000-1B2-01 |
| ARM1000-1B2-01G |
| ARM1000-2A1-01G |
| Codice componente | Prezzo unitario standard | Quantità minima d'ordine | Sconto volumi elevati | Giorni spedizione standard ? | Lato mandata, tipo di collegamento | Lato mandata, diam. collegamento | Lato controllo, tipi di collegamento | Manometro | Size of Body | Set Pressure | Connected Number | Piping Specification |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
324.27 € | 1 | 26 giorni | Rc | 1/8 | Rc | [Con manometro] Con manometro | 1,000 | 0.05–0.7MPa | 10 stazioni | IN: individuale, OUT: lato collettore | ||
245.74 € | 1 | 26 giorni | Rc | 1/8 | Rc | [Non in dotazione] N/A | 1,000 | 0.05–0.7MPa | 10 stazioni | IN: singolo, OUT: lato corpo | ||
22.48 € | 1 | 26 giorni | Rc | 1/8 | Rc | [Non in dotazione] N/A | 1,000 | 0.05–0.7MPa | 1 stazione | IN: comune, OUT: lato collettore | ||
23.63 € | 1 | 26 giorni | Rc | 1/8 | Rc | [Non in dotazione] N/A | 1,000 | 0.05–0.7MPa | 1 stazione | IN: singolo, OUT: lato corpo | ||
31.52 € | 1 | 26 giorni | Rc | 1/8 | Rc | [Con manometro] Con manometro | 1,000 | 0.05–0.7MPa | 1 stazione | IN: singolo, OUT: lato corpo | ||
62.98 € | 1 | 26 giorni | Rc | 1/8 | Rc | [Con manometro] Con manometro | 1,000 | 0.05–0.7MPa | Tipo doppio | IN: comune, OUT: lato collettore |
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.