SRF10 / 30 / 50, Regolatore gran purezza tipo fluororesina con raccordo integrato e prolunghe
- In Offerta fino al 30/11/2024
[Specifications]
· Washing parts / body: new PFA.
· Diaphragm: PTFE.
· Recommended flow rate: SRF10 2 L/min, SRF30 5 L/min (inlet pressure: 0.3 MPa, fluid: water).
· RoHS compliant.
· Integrated fitting / with nut / tube extensions.
· Pilot port thread types: Rc1/8, NPT1/8.
· Body sizes: 1, 3.
· Fitting types: LQ1, LQ2, none.
(i)Nota
- ■ SMC Product Line
Webpages for products currently without individual pages on this site will be released on an ad-hoc basis.
Click here for a quotation or to make an order if you have a model number.
■ Products Planned for Online Release
Air cylinder-related product pages will be released on this site on an ad-hoc basis.
CQ2, MG types, etc., are already available. Click here to check.
*Vacuum equipment, FRLs, solenoid valves, etc., will also be released on dedicated pages on this site on an ad-hoc basis.
*The information above is correct as of December 2018. - See the catalog for specification details.
- Product images may be representative images. Refer to the catalog for details.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
SRF Series Fluororesin Type Clean Regulator Specifications
External appearance with nut
Tube extension external appearance
| Model | SRF10 | SRF30 | |
|---|---|---|---|
| Proof pressure | 1.0 MPa | ||
| Maximum operating pressure | 0.5 MPa | ||
| Set Pressure Range | 0.02 to 0.4 MPa | ||
| Maximum operating pressure (pilot pressure) | 0.5 MPa | ||
| Fluid | Deionized water (pure water), N2 | ||
| Ambient and fluid temperature | 5 to 60°C | ||
| Valve leakage | 10 cm3/min or less (fluid: water) | ||
| Weight (kg) | Tube extensions | 0.08 | 0.24 |
| Integrated fittings | 0.10 | 0.28 | |
| With nut | |||
SRF10, 30 Diagram
Integrated fittings / with reducer diagram
With nut diagram
Tube extensions diagram
| Number | Part name | Material | Note |
|---|---|---|---|
| 1 | Body | New PFA | - |
| 2 | Valve guide | PVDF | - |
| 3 | Bonnet | PPS | - |
| 4 | Spacer | PVDF | - |
| 5 | Pilot diaphragm | Fluoroelastomer | - |
| 6 | Diaphragm support | PP | - |
| 7 | Pressure-resistant diaphragm B | Fluoroelastomer | - |
| 8 | Diaphragm | PTFE | - |
| 9 | Valve diaphragm | PTFE | - |
| 10 | Pressure-resistant diaphragm A | Fluoroelastomer | - |
| 11 | Spring holder | SUS304 | Fluorine coating |
| 12 | Valve spring | SUS304 | Fluorine coating |
| 13 | Insert bushing | New PFA | - |
| 14 | Nut | New PFA | - |
| 15 | Collar | New PFA | - |
SRF10 dimensions
(Unit: mm)
SRF10 integrated fittings dimensional drawing
(Unit: mm)
SRF10 with nut dimensional drawing
(Unit: mm)
SRF10 tube extensions dimensional drawing
(Unit: mm)
| Model | A1 | A2 | B1 | B2 |
|---|---|---|---|---|
| SRF10S-1S07 | 31 | 31 | 48 | 48 |
| SRF10S-1S0711 | 28 | 51 | ||
| SRF10S-1S11 | 28 | 28 | 51 | 51 |
| SRF10S-1S1107 | 31 | 48 | ||
| SRF10S-2S07 | 28 | 28 | 52 | 52 |
| SRF10S-2S0711 | 27 | 55 | ||
| SRF10S-2S11 | 27 | 27 | 55 | 55 |
SRF30 dimensions
(Unit: mm)
SRF30 integrated fittings dimensional drawing
(Unit: mm)
SRF30 with nut dimensional drawing
(Unit: mm)
| Model | A1 | A2 | B1 | B2 |
|---|---|---|---|---|
| SRF30S-1S11 | 35 | 35 | 58 | 58 |
| SRF30S-1S1113 | 34 | 62 | ||
| SRF30S-1S13 | 34 | 34 | 62 | 62 |
| SRF30S-1S1311 | 35 | 58 | ||
| SRF30S-2S13 | 32 | 32 | 65 | 65 |
| SRF30S-2S1311 | 34 | 63 |
Precautions
- *Use special tools to connect tubing. Refer to "High-Purity Fluoropolymer Fittings / Hyper Fitting LQ1, 2 Series Work Procedure Instructions" for notes regarding tube connections and dedicated tools.
- *Tighten the nut until it touches the end surface of the body, and then tighten it an additional 1/8 turn to ensure that the nut has reached the end surface. If the nut will not turn any further, then it means sufficient tightening has occurred.
Refer to the proper tightening torques shown below.
| Body class | Torque (N·m) | |
|---|---|---|
| LQ1 | LQ2 | |
| 2 | 0.3 to 0.4 | 1.5 to 2.0 |
| 3 | 0.8 to 1.0 | 3.0 to 3.5 |
| 4 | 1.0 to 1.2 | 7.5 to 9.0 |
| 5 | 2.5 to 3.0 | 11.0 to 13.0 |
| 6 | 5.5 to 6.0 | - |
- *Be sure to read the safety precautions as well as the product-specific precautions in the manufacturer's catalog before use.
- *The images for this product are representative images. *The product shown may differ from the actual product.
- *See the manufacturer's catalog for information other than the above.
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | Lato mandata, diam. collegamento | Lato di controllo, diametro collegamento | Size of Body | Pilot Port Screw Type | Tipo raccordo | |
|---|---|---|---|---|---|---|---|---|---|
494.81 € | 1 | 26 giorni | ø 1/8 | ø 1/8 | 1 | Rc1/8 | LQ2 | ||
494.74 € | 1 | 26 giorni | ø 1/8 | ø 1/8 | 1 | NPT 1/8 | LQ2 | ||
494.81 € | 1 | 26 giorni | ø 4 | ø 4 | 1 | Rc1/8 | LQ2 | ||
494.81 € | 1 | 26 giorni | ø 6 | ø 6 | 1 | Rc1/8 | LQ2 | ||
494.74 € | 1 | 26 giorni | ø 6 | ø 6 | 1 | NPT 1/8 | LQ2 | ||
494.81 € | 1 | 26 giorni | ø 1/4 | ø 1/4 | 1 | Rc1/8 | LQ2 | ||
494.74 € | 1 | 26 giorni | ø 1/4 | ø 1/4 | 1 | NPT 1/8 | LQ2 | ||
480.03 € | 1 | 4 giorni | ø 1/4 | ø 1/4 | 1 | Rc1/8 | Assente | ||
480.03 € | 1 | 26 giorni | ø 1/4 | ø 1/4 | 1 | NPT 1/8 | Assente | ||
506.03 € | 1 | 26 giorni | Ø2 | Ø2 | 1 | Rc1/8 | LQ1 | ||
516.71 € | 1 | 26 giorni | Ø3 | Ø3 | 1 | Rc1/8 | LQ1 | ||
599.97 € | 1 | 26 giorni | ø 6 | ø 6 | 3 | NPT 1/8 | LQ2 | ||
600.03 € | 1 | 26 giorni | ø 1/4 | ø 1/4 | 3 | Rc1/8 | LQ2 | ||
599.97 € | 1 | 26 giorni | ø 1/4 | ø 1/4 | 3 | NPT 1/8 | LQ2 | ||
600.03 € | 1 | 26 giorni | ø 8 | ø 8 | 3 | Rc1/8 | LQ2 | ||
600.03 € | 1 | 26 giorni | ø 10 | ø 10 | 3 | Rc1/8 | LQ2 | ||
600.03 € 420.02 € | 1 |
Stesso giorno
Stock | ø 3/8 | ø 3/8 | 3 | Rc1/8 | LQ2 | ||
599.97 € | 1 | 26 giorni | ø 3/8 | ø 3/8 | 3 | NPT 1/8 | LQ2 | ||
572.34 € | 1 | 7 giorni | ø 3/4 | ø 3/4 | 3 | Rc1/8 | Assente | ||
572.34 € | 1 | 26 giorni | ø 3/4 | ø 3/4 | 3 | NPT 1/8 | Assente | ||
463.29 € | 1 | 26 giorni | Ø3 | Ø3 | 3 | Rc1/8 | LQ1 |
Loading...
Informazioni di base
| Regolatore, valvola di sovrapressione | Regolatore | Regolatore | Standard | Liquido applicabile | Azoto / Acqua |
|---|---|---|---|---|---|
| Profilo | Standard | Ambiente d'esercizio | Disponibile in ambiente sanitario | Meccanismo di scarico | N/A |
| Funzione corrente contraria | NA | Lato mandata, tipo di collegamento | Raccordo dritto | Gamma di pressioni d'esercizio(MPa) | null::0.5 |
| Lato controllo, tipi di collegamento | Raccordo dritto | Manometro | N/A | Custom-made Specifications | Standard |
Configura
Stock
-
- Indicare solo prodotti a magazzino
Proprietà di base
-
Lato mandata, diam. collegamento
-
Lato di controllo, diametro collegamento
-
Size of Body
-
Pilot Port Screw Type
- NPT 1/8
- Rc1/8
-
Tipo raccordo
- LQ1
- LQ2
- Assente
-
Tipo
- SRF□0-S
- SRF□0-Ｔ
- SRF□0S-□S
-
Filtrare per tipo dati CAD
- 2D
- 3D
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- Stesso giorno
- 4 giorni o meno
- 7 giorni o meno
- 26 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.