• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Guide di scorrimento telescopiche, a estrazione totale, capacità di carico fino a 3100N (GN 1440) (1440-400-B-1-ZB)

Guide di scorrimento telescopiche, a estrazione totale, capacità di carico fino a 3100N (GN 1440) 1440-400-B-1-ZB
  • Sconto volumi elevati

GANTER

GANTER

Dettagli del prodotto:

Codice articolo del costruttore: 1440-400-B-1-ZB

Marca: GANTER

Prezzo: 154.18 €

Tempi di consegna: 12 giorni


Dati Tecnici:

Corsa Ls: 398 mm

Lunghezza guida L: 400 mm

Tipo: B, con fermo in gomma

l3: 786

FS: 2500, 2500


Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

1440-400-B-1-ZB

GN 1440 / Telescopic Slides with Full Extension, Load Capacity up to 3100 N

Information


Telescopic slides GN 1440 are installed vertically and in pairs. The stroke reaches ≈ 100 % of the nominal length l1 (full extension). Patented plastic ball cages ensure extremely smooth running of the slide.
Telescopic slides of various types, for example, with and without latch, can be combined freely, which is why GN 1440 is delivered as a single unit and not in pairs. Thanks to the symmetrical design, all types can be installed on either the right or left side on the extension.
All mounting holes are easy to reach through auxiliary holes. Only the mounting holes are shown, but other production-related holes may be present.

see also...
• Technical information on telescopic slides

How to Order

How to order
1l1
2Type
3Identification no.
4Finish

Specification                                              

• Slide profile
 Steel, zinc plated, blue passivated                          ZB
• Bearings
 Roller bearing steel, hardened
• Ball cage
 Plastic
• Latches
 Zinc die casting / Plastic
• Rubber stop
 Plastic / Elastomer
• Operating temperature -20 °C to 100 °C
• RoHS compliant

On Request

• Other lengths and hole spacing
• Other attachment options
• Other surfaces

Dimensions

         
l1
l2+4
-4
l3FS per pair in N l1
l2+4
-4
l3FS per pair in N
 Stroke at 10,000 cyclesat 100,000 cycles    Stroke at 10,000 cyclesat 100,000 cycles
3002985861250875 800806159431002175
40039878622001550 900904179231002175
500512100026001800 10001000198830002100
600610119828001950 12001212240029002025
700708139630002100 15001504299222001550

Mounting Holes - Outer Slide

l1a6a7a8a9a10a11a12a13a14a15a16a17a18
300--------161173193213228
400--------261273293313328
500--------361373393413428
600213228363378----461473493513528
700213228363378----561573593613628
800313328463478----661673693713728
900313328463478----761773793813828
1000413428563578----861873893913928
120031332846347871372886387810611073109311131128
15004134285635789139281063107813611373139314131428

Mounting Holes - Inner Slide

I1i5i6i7i8i9i10i11i12i13i14i15i16i17
300---------173**-213228
400-161------261273293313328
500-229------361373393413428
600213228398413----461473493513528
700313328463478----561573593613628
800313328498513----661673693713728
900413428563578----761773793813828
1000413428598613----861873893913928
120031332846347871372886387810611073109311131128
15004134285635789139281063107813611373139314131428
    * Bores are only usable on type B and type K. ** Bores are only usable on type B and type M.

Fastening Screws

For the said loading forces FS to be absorbed reliably in the surrounding structure, all available through-holes of the outer and inner slide having a diameter (Ø) of 6.6 must be used. Alternatively, holes with a diameter (Ø) of 5.2 are available. The elongated holes, Ø 6.6 x 3.4, facilitate adjustment during mounting when needed. Failure to use fastening screws reduces the load capacity. The following screws can be used for mounting:
Designation - standardOuter slideInner slide
Hexagon socket button head screwISO 7380M 5 / M 6M 5 / M 6
Hexagon socket low cylindrical head screwDIN 7984 / DIN 6912M 5M 5

Type B with Rubber Stop

The rubber stops of type B dampen the impact of the slide in the respective end position. This feature minimizes noise development and increases the lifespan. Attached to the slides in a partially concealed, partially visible manner, the stops meet each of the requirements in regard to shape, material, and hardness.
If larger static or dynamic loads occur in the direction of extension, they should be absorbed by external stop elements.

Type M with Rubber Stop, Latch in Back

Type M is used in applications in which the slide needs to be locked in the back end position. This feature prevents the slide from extending on its own, for example, due to a tilted position. If larger loads occur in the direction of extension in the latched position, they should be absorbed by external latch elements.
The latch mechanism locks into place in a spring-loaded opening of the outer slide in the closed state. Pressing the release lever releases the inner and middle slide for extension. Back in the back stop position, the mechanism locks into place automatically in the opening of the outer slide by moving over a ramp.

Type K with Rubber Stop, Latch in Front

Type K is used when the extension needs to stay in the front stop position for a certain amount of time. This feature allows maintenance work to be performed when the extension is expanded, for example. If larger loads occur in the latched position, they should be absorbed by external latch elements.
For the function to be activated, the slide has to be fully extended to the front, where it will automatically click into place through a pretensioned locking lever. Pressing the lever releases the slide, allowing slide to retract again.

Type Q with Rubber Stop, Latch in Back-Front

Type Q unites the properties of types M and K. The inner and middle slide lock into place in the respective end position.
Unlike the release of type K, type Q is activated through an internal rod by a convenient “remote control.” The green activation lever is pressed out, the locking lever activated, and the slide released for retraction.
Numero di dati da visualizzare
30
45
60
  1. 1
Codice componente
1440-400-B-1-ZB
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
Corsa Ls
(mm) 		Lunghezza guida L
(mm) 		Tipo l3 FS x1 Peso
(kg)

154.18 €

1 Disponibile 12 giorni 398400B, con fermo in gomma7862500, 25001750, 17501.880

Loading...

  1. 1
 

Informazioni di base

N. identificazione 1, Fissaggio tramite fori passanti Finitura ZB, zincatura con passivazione blu

Si trova sulla pagina di Guide di scorrimento telescopiche, a estrazione totale, capacità di carico fino a 3100N (GN 1440), il codice articolo è il seguente: 1440-400-B-1-ZB.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto 1440-400-B-1-ZB.

Configura

Ripristina

1Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Corsa Ls(mm)

    • 298
    • 398
    • 512
    • 610
    • 708
    • 806
    • 904
    • 1000
    • 1212
    • 1504

    Ripristina

  • Lunghezza guida L(mm)

    • 300
    • 400
    • 500
    • 600
    • 700
    • 800
    • 900
    • 1000
    • 1200
    • 1500

    Ripristina

  • Tipo

    • B, con fermo in gomma
    • K, con fermo in gomma, dispositivo di bloccaggio sul lato anteriore
    • M, con fermo in gomma, dispositivo di bloccaggio sul lato posteriore
    • Q, con fermo in gomma, dispositivo di bloccaggio sul lato anteriore e posteriore

    Ripristina

  • l3

    • 586
    • 786
    • 1000
    • 1198
    • 1396
    • 1594
    • 1792
    • 1988
    • 2400
    • 2992

    Ripristina

  • FS

    • 2250, 2250
    • 2500, 2500
    • 2600, 2600
    • 2750, 2750
    • 2950, 2950
    • 3100, 3100
    • 3200, 3200
    • 3250, 3250

    Ripristina

  • x1

    • 1575, 1575
    • 1750, 1750
    • 1800, 1800
    • 1920, 1920
    • 2025, 2025
    • 2175, 2175
    • 2250, 2250
    • 2275, 2275

    Ripristina

Filtrare per giorni di spedizione standard

Attributi opzionali

Tipologia prodotto

Codice componente
1440-1000-Q-1-ZB
1440-1200-B-1-ZB
1440-1200-K-1-ZB
1440-400-K-1-ZB
1440-400-M-1-ZB
1440-400-Q-1-ZB
Codice componentePrezzo unitario standardQuantità minima d'ordineSconto volumi elevatiGiorni
spedizione standard
?		Corsa Ls
(mm) 		Lunghezza guida L
(mm) 		Tipo l3 FS x1 Peso
(kg)

392.46 €

1 Disponibile 12 giorni 10001000Q, con fermo in gomma, dispositivo di bloccaggio sul lato anteriore e posteriore19883250, 32502275, 22755.000

380.52 €

1 Disponibile 12 giorni 12121200B, con fermo in gomma24002950, 29502025, 20255.920

395.02 €

1 Disponibile 12 giorni 12121200K, con fermo in gomma, dispositivo di bloccaggio sul lato anteriore24002950, 29502025, 20255.920

167.90 €

1 Disponibile 12 giorni 398400K, con fermo in gomma, dispositivo di bloccaggio sul lato anteriore7862500, 25001750, 17501.880

178.20 €

1 Disponibile 12 giorni 398400M, con fermo in gomma, dispositivo di bloccaggio sul lato posteriore7862500, 25001750, 17501.900

189.70 €

1 Disponibile 12 giorni 398400Q, con fermo in gomma, dispositivo di bloccaggio sul lato anteriore e posteriore7862500, 25001750, 17501.980

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.