• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Guide di scorrimento telescopiche, a estrazione totale, capacità di carico fino a 510N (GN 1410) (1410-750-F-1-ZB)

Guide di scorrimento telescopiche, a estrazione totale, capacità di carico fino a 510N (GN 1410) 1410-750-F-1-ZB
  • Sconto volumi elevati

GANTER

GANTER

Dettagli del prodotto:

Codice articolo del costruttore: 1410-750-F-1-ZB

Marca: GANTER

Prezzo: 67.06 €

Tempi di consegna: 12 giorni


Dati Tecnici:

Corsa Ls: 750 mm

Lunghezza guida L: 750 mm

l3: 1500

FS: 400, 400

x1: 300, 300


Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

1410-750-F-1-ZB

GN 1410 / Telescopic Slides with Full Extension, Load Capacity up to 510 N

Information


Telescopic slides GN 1410 are installed vertically and in pairs. The stroke reaches ≈ 100 % of the nominal length l1 (full extension).
The telescopic slides are delivered in pairs. They can be installed on the extension on either the left or right side due to the mechanics. All mounting holes are easy to reach through auxiliary holes. Only the mounting holes are shown, but other production-related holes may be present.

see also...
• Technical information on telescopic slides
• Stainless Steel-Telescopic slides GN 1450 (with full extension)
• Telescopic slides GN 1412 (with self-retracting mechanism)

How to Order

How to order
1l1
2Type
3Identification no.
4Finish

Specification                                           

• Slide profile
 Steel, zinc plated, blue passivated                        ZB
• Bearings
 Roller bearing steel, hardened
• Ball cage, outer slide
 Plastic
• Ball cage, inner slide
 Steel, zinc plated
• Rubber stop and detach function
 Plastic / Elastomer
• Operating temperature -20 °C to 100 °C
• RoHS compliant

On Request

• other lengths and hole spacing
• other attachment options
• other surfaces

Dimensions

         
l1
l2+3
-3
l3FS per pair in N l1
l2+3
-3
l3FS per pair in N
 Stroke at 10,000 cyclesat 100,000 cycles      Stroke at 10,000 cyclesat 100,000 cycles
250250500450320 5505501100460340
300300600460340 6006001200440340
350350700480360 6506501300420320
400400800510390 7007001400420320
450450900510390 7507501500400300
5005001000480360 8008001600400300

Mounting Holes - Outer Slide

l1a7a8a9a10a11a12a13a14a15a16a17
250183199---------
300259275---------
350259275309--------
400259275-323339--373---
450259275361.5387403------
500259275361.5387403451467----
550259275361.5387403451467501---
600259275361.5387403515531565---
650259275361.5387403579595629---
700259275361.5387403579595629---
750259275361.5387403547563597643659693
800259275361.5387403579595629707723757

Mounting Holes - Inner Slide

I1i4i5i6i7i8i9i10i11i12
250209.5225.5235------
300129.5145.5155257.5273.5283---
350161.5177.5187289.5305.5315---
400193.5209.5219353.5369.5379---
450193.5209.5219385.5401.5411---
500225.5241.5251449.5465.5475---
550257.5273.5283481.5497.5507---
600289.5305.5315545.5561.5571---
650321.5337.5347609.5625.5635---
700321.5337.5347609.5625.5635---
750193.5209.5219321.5337.5347673.5689.5699
800193.5209.5219353.5369.5379705.5721.5731

Fastening Screws

For the said loading forces FS to be absorbed reliably in the surrounding structure, all available through-holes of the outer and inner slide having a diameter (Ø) of 4.5 must be used. Alternatively, the outer slide has holes with a diameter (Ø) of 6.3 for Euro screws. The elongated holes, Ø 4.5 x 4.8, are used likewise for fastening and facilitate adjustment during mounting when needed. Failure to use fastening screws reduces the specified load capacity accordingly. The following screws can be used for mounting:
Designation - standard Outer slideInner slide
Hexagon socket button head screwISO 7380M 4M 4
Pan head screw, PhillipsISO 7045M 4M 4
Pan head tapping screw, PhillipsISO 7049ST 3,9 / 4,2ST 3,9 / 4,2

Rubber Stop, Locking Device in Back

The rubber stops of type F dampen the impact of the slide in the respective end position. This feature minimizes noise development and increases the lifespan. Attached to the slides in a partially concealed, partially visible manner, the stops meet each of the requirements in regard to shape, material, and hardness.
In the back stop position, the rubber stop takes on additionally a locking function, which is noticeable through a slight resistance on opening and closing.
If larger static or dynamic loads occur in the direction of extension, they should be absorbed by external stop elements.

Detach Function

Type F has additionally a detach function through which the extension slides can be completely separated from one another in the area of the middle and inner slide. This feature not only facilitates mounting. It also allows the extension to be quickly removed, for example, when frequent maintenance work is performed on the components located behind.
The telescopic slide can be quickly and easily detached in the extracted position through activation of the release lever, allowing the inner slide to be removed from the front.
For reattaching the slides, the ball cages need to be moved to the front end position. Then the inner slide is inserted to the back end stop where it locks into place automatically.
The protected arrangement of the release mechanism prevents accidental detachment of the slide.
Numero di dati da visualizzare
30
45
60
  1. 1
Codice componente
1410-750-F-1-ZB
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
Corsa Ls
(mm) 		Lunghezza guida L
(mm) 		l3 FS x1 Peso
(kg)

67.06 €

1 Disponibile 12 giorni 7507501500400, 400300, 3002.250

Loading...

  1. 1
 

Informazioni di base

Tipo F, con fermo in gomma, dispositivo di bloccaggio sul lato posteriore, funzione di distacco N. identificazione 1, Fissaggio tramite fori passanti Finitura ZB, zincatura con passivazione blu

Si trova sulla pagina di Guide di scorrimento telescopiche, a estrazione totale, capacità di carico fino a 510N (GN 1410), il codice articolo è il seguente: 1410-750-F-1-ZB.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto 1410-750-F-1-ZB.

Configura

Ripristina

1Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Corsa Ls(mm)

    • 250
    • 300
    • 350
    • 400
    • 450
    • 500
    • 550
    • 600
    • 650
    • 700
    • 750
    • 800

    Ripristina

  • Lunghezza guida L(mm)

    • 250
    • 300
    • 350
    • 400
    • 450
    • 500
    • 550
    • 600
    • 650
    • 700
    • 750
    • 800

    Ripristina

  • l3

    • 500
    • 600
    • 700
    • 800
    • 900
    • 1000
    • 1100
    • 1200
    • 1300
    • 1400
    • 1500
    • 1600

    Ripristina

  • FS

    • 400, 400
    • 420, 420
    • 440, 440
    • 450, 450
    • 460, 460
    • 480, 480
    • 510, 510

    Ripristina

  • x1

    • 300, 300
    • 320, 320
    • 340, 340
    • 360, 360
    • 390, 390

    Ripristina

Filtrare per giorni di spedizione standard

Attributi opzionali

Tipologia prodotto

Codice componente
1410-300-F-1-ZB
1410-350-F-1-ZB
1410-400-F-1-ZB
1410-450-F-1-ZB
1410-500-F-1-ZB
1410-800-F-1-ZB
Codice componentePrezzo unitario standardQuantità minima d'ordineSconto volumi elevatiGiorni
spedizione standard
?		Corsa Ls
(mm) 		Lunghezza guida L
(mm) 		l3 FS x1 Peso
(kg)

33.82 €

1 Disponibile 12 giorni 300300600460, 460340, 3400.880

35.68 €

1 Disponibile 12 giorni 350350700480, 480360, 3601.040

38.52 €

1 Disponibile 12 giorni 400400800510, 510390, 3901.200

43.46 €

1 Disponibile 12 giorni 450450900510, 510390, 3901.200

45.58 €

1 Disponibile 12 giorni 5005001000480, 480360, 3601.520

73.54 €

1 Disponibile 12 giorni 8008001600400, 400300, 3002.400

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.