• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Mozzo ROTEX®/Sistemi KTR (020195101600)

Mozzo ROTEX®/Sistemi KTR 020195101600

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

  • Mozzo ROTEX®/Sistemi KTR 020195101600
  • Mozzo ROTEX®/Sistemi KTR 020195101600
  • Mozzo ROTEX®/Sistemi KTR 020195101600
  • Mozzo ROTEX®/Sistemi KTR 020195101600
  • Mozzo ROTEX®/Sistemi KTR 020195101600
  • Mozzo ROTEX®/Sistemi KTR 020195101600

KTR_SYSTEMS

KTR_SYSTEMS

Dettagli del prodotto:

Codice articolo del costruttore: 020195101600

Marca: KTR_SYSTEMS

Prezzo: 18.92 €

Tempi di consegna: 3 giorni


Dati Tecnici:

Diam. esterno A: 40 mm

Tipo prodotto: ROTEX 19 ST

Misura: 19

Materiale: Acciaio

Versione: Con sede chiavetta


Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

020195101600

ROTEX® Flexible Jaw Couplings

Hub Types

Due to the numerous applications of ROTEX® for many different applications and mounting situations, this coupling system is available with various hub types. These types mainly differ in that they offer either positive or frictionally engaged connections, but mounting situations like, for example, gear shafts with integrated transmission cams or similar applications are covered, too.
Type 1.0 hub
with feather keyway and setscrew
Positive locking power transmission, permissible torque depending on the permissible surface pressure. Not suitable for backlash-free power transmission with heavily reversing operation.

Type 1.1 hub
without feather keyway with setscrew
Non-positive torque transmission for crimp and glued connections. (No ATEX-release)

Type 1.3 hub
with spline bore (see page 20)		 Type 2.0 clamping hub
single slotted without feather keyway
Frictionally engaged, backlash-free shaft-hub-connection-.
Transmittable torques depending on bore diameter (see
page 34). (For ATEX category 3 only)

Type 2.1 clamping hub
single slotted with feather keyway
Non-positive torque transmission for crimp and glued connections.
(No ATEX-release)
Positive locking power transmission with additional frictionally engaged condition. The frictional engagement avoids
or reduces the reverse backlash. Surface pressure of the keyway connection is reduced.

Type 2.3 clamping hub
with spline (see page 29/30)
     
Type 4.2 hub
with CLAMPEX® clamping set KTR 250
Frictionally engaged, backlash-free shaft-hub-connection for the transmission of average torques.

Type 4.1 for CLAMPEX® clamping set KTR 200
type 4.3 for CLAMPEX® clamping set KTR 400
Frictionally engaged, backlash-free shaft-hub-connection for the transmission of high torques.		 Type 6.0 clamping ring hub
(see ROTEX® GS series)
Integrated frictionally engaged shaft-hub-connection for the transmission of higher torques. Screwing on elastomer side.
For details about torque and dimensions see page 29. Suitable for high speeds.

Type 6.5 clamping ring hub
(see ROTEX® GS series)
Design like 6.0, except for clamping screws externally. As an example for radial disassembly of intermediate pipe (special design).
     
Type 7.5 clamping hub type DH
without feather keyway for
double-cardanic connection
Frictionally engaged, backlash-free shaft-hub-connection for radial assembly of coupling. Transmittable torques depending on bore diameter (For ATEX category 3 only)

Type 7.6 clamping hub type DH
with feather keyway for
double-cardanic connection
Positive locking power transmission with additional friction fit for radial assembly of coupling. The frictional engagement avoids or reduces the reverse backlash. Surface pressure of the keyway connection is reduced.		 Type 7.8 clamping hub type H
without feather keyway
Frictionally engaged, backlash-free shaft-hub-connection for radial assembly of coupling. Transmittable torques depending on bore diameter (For ATEX category 3 only)

Type 7.9 clamping hub type H
with feather keyway
Positive locking power transmission with additional friction fit for radial assembly of coupling. The frictional engagement avoids or reduces the reverse backlash. Surface pressure of the keyway connection is reduced.
     
Type 7.0 SPLIT hub
without feather keyway
Split hub made of cast iron. Frictionally engaged, backlashfree shaft-hub-connection-. Transmittable torques depending on bore diameter (For ATEX category 3 only)		 Type 7.1 SPLIT hub
with feather keyway
Split hub made of cast iron. Positive locking power transmission with additional frictionally engaged condition. The frictional engagement avoids or reduces the reverse backlash. Surface pressure of the keyway connection is reduced.
     
FNN hub
Coupling hub to be connected to an attachment such as
brake drum, brake disk and fan.		 SD hub shifting hub
Coupling hub for separating or switching on the driving/ driven machine with standstill of the machine. Can be combined with slip ring and shiftable linkage.
     
TB1 hub/TB2 hub
Coupling hub for taper clamping bushes. TB1 screwed on
cam side. TB2 screwed externally.		 Type 3Na + 4N
Driving flange with flange type K
For type AFN and BFN:
With type AFN the spider can be replaced while being assembled without having to disassemble the driving and driven side.
     
Mitnehmerflansch Ausf. 3b
Driving flange to connect to customer’s component. Abmessungen siehe Seite 38		 Mitnehmerflansch Ausf. 3Na
Driving flange to connect to customer’s component. Abmessungen siehe Seite 38
Numero di dati da visualizzare
30
45
60
  1. 1
Codice componente
020195101600
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
Diam. esterno A
(mm) 		Tipo prodotto Misura Materiale Versione Foro
(mm) 		Adattatore Velocità max.
(giri/min) 		spostamento assiale consentito
(mm) 		disallineamento radiale consentito
(mm) 		spostamento angolare consentito
(°) 		l1, l2
(mm) 		E
(mm) 		Tipo conico Peso netto
(kg) 		Ordine grandi quantità

18.92 €

1 3 giorni 40ROTEX 19 ST19AcciaioCon sede chiavetta16H719000-0,5 / +1,20.21.22516-0.2350

Loading...

  1. 1
 

Si trova sulla pagina di Mozzo ROTEX®/Sistemi KTR, il codice articolo è il seguente: 020195101600.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto 020195101600.

Configura

Ripristina

1Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Tipo conico

    • D-25 1:5
    • C-20 1:5
    • B-17 1:5
    • B-17L 1:5
    • A-10 1:5
    • A-10L 1:5
    • N/1 1:8
    • N/1L 1:8
    • N/1d 1:8
    • N/2 1:8
    • N/2a 1:8
    • N/2aL 1:8
    • N/2b 1:8
    • N/3 1:8
    • N/3L 1:8

    Ripristina

  • Tipo

    Ripristina

  • Diam. esterno A(mm)

    • 30
    • 40
    • 55
    • 65
    • 80
    • 95
    • 105
    • 120
    • 135
    • 160
    • 200
    • 225
    • 255
    • 290
    • 320
    • 370
    • 420

    Ripristina

  • Tipo prodotto

  • Misura

  • Materiale

  • Versione

  • Foro(mm)

  • Adattatore

  • Velocità max.(giri/min)

  • spostamento assiale consentito(mm)

  • disallineamento radiale consentito(mm)

  • spostamento angolare consentito(°)

  • l1, l2(mm)

  • E(mm)

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Filtrare per giorni di spedizione standard

    • Tutti gli articoli
    • 3 giorni o meno
    • 4 giorni o meno
    • 5 giorni o meno
    • 27 giorni o meno

    Ripristina

Attributi opzionali

Tipologia prodotto

Codice componente
020142101100
020142101200
020142101400
020195101700
020195101800
020195101900
Codice componentePrezzo unitario standardQuantità minima d'ordineSconto volumi elevatiGiorni
spedizione standard
?		Diam. esterno A
(mm) 		Tipo prodotto Misura Materiale Versione Foro
(mm) 		Adattatore Velocità max.
(giri/min) 		spostamento assiale consentito
(mm) 		disallineamento radiale consentito
(mm) 		spostamento angolare consentito
(°) 		l1, l2
(mm) 		E
(mm) 		Tipo conico Peso netto
(kg) 		Ordine grandi quantità

10.40 €

1 3 giorni 30ROTEX 14 SINT14Acciaio sinterizzatoCon sede chiavetta11H7--0,5 / +1,00.171.21113-0.0550

10.40 €

1 3 giorni 30ROTEX 14 SINT14Acciaio sinterizzatoCon sede chiavetta12H7--0,5 / +1,00.171.21113-0.0550

10.40 €

1 3 giorni 30ROTEX 14 SINT14Acciaio sinterizzatoCon sede chiavetta14H7--0,5 / +1,00.171.21113-0.04950

18.92 €

1 3 giorni 40ROTEX 19 ST19AcciaioCon sede chiavetta17H719000-0,5 / +1,20.21.22516-0.2250

18.92 €

1 3 giorni 40ROTEX 19 ST19AcciaioCon sede chiavetta18H719000-0,5 / +1,20.21.22516-0.2250

18.92 €

1 3 giorni 40ROTEX 19 ST19AcciaioCon sede chiavetta19H719000-0,5 / +1,20.21.22516-0.2150

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.