Griffa morbida HO1MA (per HOWA)【2-3 Pezzi per confezione】 (HO1MA-12-1.5)
Dettagli del prodotto:
Codice articolo del costruttore: HO1MA-12-1.5
Marca: TRUSCO NAKAYAMA
Prezzo: 169.47 €
Tempi di consegna: 6 giorni
Dati Tecnici:
Details Type: For HO1MA
Chuck diameter: 12 Inch
Pitch: 1.5 mm
Height: 50 mm
Length: 129 mm
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
HO1MA-12-1.5
Codice componente
|
|---|
| HO1MA-12-1.5 |
| Codice componente |
Prezzo unitario standard
| Numero di pz. inclusi per conf. | Quantità minima d'ordine | Sconto volumi elevati | Details Type | Chuck diameter (Inch) | Pitch (mm) | Height (mm) | Length (mm) | Width (mm) | Trusco Code | Mass (g/group) | Features | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
169.47 € | 3 Pezzi per confezione | 1 conf. | 6 giorni | For HO1MA | 12 | 1.5 | 50 | 129 | 50 | 114-0655 | 6700 | S45C steel, which can be easily cut for modification and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw. |
Loading...
Si trova sulla pagina di Griffa morbida HO1MA (per HOWA), il codice articolo è il seguente: HO1MA-12-1.5.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto HO1MA-12-1.5.
Configura
Proprietà di base
-
Tipo
- HO1MA-1.5
- HO1MA-3.0
- HO22M
- HO24M
- HO27M
- HO7MA
- HO7MA-60
- HO7MA-90
-
Details Type
- For HO1MA
-
Chuck diameter(Inch)
-
Pitch(mm)
- 1.5
- 3
-
Height(mm)
-
Length(mm)
-
Width(mm)
-
Trusco Code
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 6 giorni o meno
- 10 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Tipologia prodotto
| Codice componente |
|---|
| HO1MA-10-1.5 |
| HO1MA-10-3.0 |
| HO1MA-12-3.0 |
| HO1MA-15-3.0 |
| HO1MA-4-1.5 |
| HO1MA-5-1.5 |
| Codice componente | Prezzo unitario standard | Numero di pz. inclusi per conf. | Quantità minima d'ordine | Sconto volumi elevati | Giorni spedizione standard ? | Details Type | Chuck diameter (Inch) | Pitch (mm) | Height (mm) | Length (mm) | Width (mm) | Trusco Code | Mass (g/group) | Features |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
107.92 € | 3 Pezzi per confezione | 1 conf. | 6 giorni | For HO1MA | 10 | 1.5 | 40 | 110 | 40 | 114-0639 | 3500 | S45C steel, which can be easily cut for modification and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw. | ||
107.92 € | 3 Pezzi per confezione | 1 conf. | 6 giorni | For HO1MA | 10 | 3 | 40 | 110 | 40 | 114-0647 | 3500 | S45C steel, which can be easily cut for modification and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw. | ||
169.47 € | 3 Pezzi per confezione | 1 conf. | 6 giorni | For HO1MA | 12 | 3 | 50 | 129 | 50 | 114-0663 | 6700 | S45C steel, which can be easily cut for modification and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw. | ||
303.76 € | 3 Pezzi per confezione | 1 conf. | 6 giorni | For HO1MA | 15 | 3 | 70 | 156 | 64 | 114-0671 | 13600 | S45C steel, which can be easily cut for modification and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw. | ||
54.72 € | 3 Pezzi per confezione | 1 conf. | 6 giorni | For HO1MA | 4 | 1.5 | 25 | 54 | 23 | 114-0574 | 600 | S45C steel, which can be easily cut for modification and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw. | ||
55.15 € | 3 Pezzi per confezione | 1 conf. | 6 giorni | For HO1MA | 5 | 1.5 | 25 | 58.5 | 23 | 114-0582 | 650 | S45C steel, which can be easily cut for modification and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw. |
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.