Maschiatrice tipo HA-M-OHC serie SA
[Features]
· HA-M type that supports center through coolant
· Characteristics and specifications conform to the HA-M type
· The flange through oil hole type (-OHF) is available upon order
· Unlike the spring collet, tap attachment and detachment can be performed in a single action
· Remeasurement of tool length after tap replacement is unnecessary
· The standard specification uses the TC-MO with feed pump pressures up to 2 MPa.
· Use the TC-MO-SB to handle feed pump pressures up to 5 MPa.
· Also Supports Mist Specifications
· HA-M type that supports center through coolant
· Characteristics and specifications conform to the HA-M type
· The flange through oil hole type (-OHF) is available upon order
· Unlike the spring collet, tap attachment and detachment can be performed in a single action
· Remeasurement of tool length after tap replacement is unnecessary
· The standard specification uses the TC-MO with feed pump pressures up to 2 MPa.
· Use the TC-MO-SB to handle feed pump pressures up to 5 MPa.
· Also Supports Mist Specifications
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
BT30-HA412-M-OHC
Codice componente
|
|---|
| BT30-HA412-M-OHC |
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | Spindle types | Holder Length L (mm) | C1 (mm) | Capacity Range | Mass (g) | L1 (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|
307.33 € | 1 | 8 giorni | BT30 | 105 | 35 | M3～M16 | 530 | 61.5 |
Loading...
Informazioni di base
| Product Category | Corpo principale | Applicable Manufacturing Machinery (main unit) | Centri di lavorazione | Features | HA-M Type supporting center coolant-through. Specifications and characteristics accord with HA-M Type. Special flange-through oil hole type (-OHF) can be specially made to order. Unlike spring collet, tap attachment and detachment can be performed in single action. No tool length re-measurement after tap replacement necessary. Uses TC-MO Type with 2 MPa supply pump pressure as standard. Use of TC-MO-SB Type supports maximum supply pump pressure of 5 MPa. Can support mist specification. |
|---|
Configura
Proprietà di base
-
Holder Length L(mm)
-
C1(mm)
-
Capacity Range
- M3～M16
- M8～M27
- M18～M38
-
Tipo
- HA-M-OHC
-
Spindle types
- BT30
- BT40
- BT50
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 8 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.