Coated Rod for High-Tension Steel LB-62
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
Codice componente
|
|---|
| LB-62-4-20 |
| LB-62-5-20 |
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | Pole diameter (mm) | Current range, lower (A) | Current range, vertical position, elevating, upper | |
|---|---|---|---|---|---|---|---|
201.27 € | 1 | 8 giorni | 4 | 130～180 | 110~170 | ||
198.19 € | 1 | 8 giorni | 5 | 180～240 | 150~200 |
Loading...
Informazioni di base
| Product Type | Barra per saldatura | Pole length(mm) | 400 | JIS Standard | Z3211 E6216-N1M1 U |
|---|---|---|---|---|---|
| AWS Standard | A5.5 E9016-G Applicable | Compatible Material Type | Rod exemplifies its class, barely hygroscopic | Amount Of Content | 1 Box (5 kg x 4 Boxes) |
| Mass(g) | 20000 | Application and Usage Characteristic | Pressure vessel, bridge, vehicle, and machine welding. Corresponds to 550 to 610 MPa grade steel. Extremely low hydrogen bar, with Nada moisture absorption. Arc concentration, beaded outward appearance is good, and general stance welding is easy. | Main Points of Work | Dry for approximately 1 hour at 350-400°C prior to use. Arc strike portion can cause cracks on base metal. Please use a backtracking or scrap metal method. Although type of steel and plate thickness varies, preheat at 50-100°C. Please note that if a large amount of deposit metal is used in high input heat welding, the strength and durability of the deposit will be reduced. |
| Chemical Composition of Deposited Metal C(%) | 0.06 | Chemical Composition of Deposited Metal Si(%) | 0.66 | Chemical Composition of Deposited Metal Mn(%) | 1.04 |
| Chemical Composition of Deposited Metal Mo(%) | 0.26 | Chemical Composition of Deposited Metal P(%) | 0.011 | Chemical Composition of Deposited Metal S(%) | 0.005 |
| Ni(%) | 0.61 | Identification Color, Rod End Color | Blue White | Identification Color, Secondary Color | Yellow |
| Mechanical Properties of Weld Metal Proof Stress MPa | 550 | Mechanical Properties of Weld Metal Proof Stress, Tensile Strength MPa | 650 | Mechanical Properties of Weld Metal Proof Stress, Elongation(%) | 25 |
| Mechanical Properties of Weld Metal Proof Stress, Absorption Energy(J) | 150(-20℃) | Authorized by the Classification Society of Japan | NK,ABS,LR,CR |
Configura
Proprietà di base
-
Pole diameter(mm)
-
Current range, lower(A)
-
Current range, vertical position, elevating, upper
-
Tipo
- LB-62
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 8 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.