Coated Rod for Soft Steel to 550 MPa Grade Steel B-33【1-4 Pezzi per confezione】 (B-33-3.2-20)
Dettagli del prodotto:
Codice articolo del costruttore: B-33-3.2-20
Marca: KOBE STEEL
Prezzo: 295.41 €
Tempi di consegna: 7 giorni
Dati Tecnici:
Pole diameter: 3.2 mm
Pole length: 350 mm
Current range, lower: 80～130 A
Current range, vertical position, elevating, upper: 70～120
Amount Of Content: 1 Box (5 kg x 4 Cases)
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
B-33-3.2-20
Codice componente
|
|---|
| B-33-3.2-20 |
| Codice componente |
Prezzo unitario standard
| Numero di pz. inclusi per conf. | Quantità minima d'ordine | Sconto volumi elevati | Pole diameter (mm) | Pole length (mm) | Current range, lower (A) | Current range, vertical position, elevating, upper | Amount Of Content | Mass (g) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
295.41 € | 4 Pezzi per confezione | 1 conf. | 7 giorni | 3.2 | 350 | 80～130 | 70～120 | 1 Box (5 kg x 4 Cases) | 20000 |
Loading...
Informazioni di base
| Product Type | Barra per saldatura | JIS Standard | Z3311 E4313 | AWS Standard | A5.1 E6013 Applicable |
|---|---|---|---|---|---|
| Compatible Material Type | For thin plate and lightweight structures | Application and Usage Characteristic | General machinery, lightweight thin steel plates, light structure welding and cosmetic welding. It has especially good workability for downward and horizontal fillet welding. There is very little sputtering and the slag sheathing and peeling is good. A beautiful, glossy bead with shallow welding-in can be obtained. Applicable for welding focused on exterior appearance. The large diameter rod is optimal for cosmetic welding. | Main Points of Work | Excessive current reduces X-ray performance and is the reason for degradation of workability. Hence, use the appropriate current range. Due to excessive absorption of moisture, besides deterioration of workability, pits may also occur. Hence, dehydrate at 70 to 100°C for 30 to 60 minutes. Due to excessive drying (for long period or high temperature), the penetration decreases, X-ray performance deteriorates and causes burning of the bar, even though there is no apparent change in quality. For medium and thick welding, adopt appropriate preheating / inter-path temperature. |
| Chemical Composition of Deposited Metal C(%) | 0.08 | Chemical Composition of Deposited Metal Si(%) | 0.30 | Chemical Composition of Deposited Metal Mn(%) | 0.33 |
| Chemical Composition of Deposited Metal P(%) | 0.013 | Chemical Composition of Deposited Metal S(%) | 0.009 | Identification Color, Rod End Color | Pink |
| Identification Color, Secondary Color | NA | Mechanical Properties of Weld Metal Proof Stress MPa | 430 | Mechanical Properties of Weld Metal Proof Stress, Tensile Strength MPa | 480 |
| Mechanical Properties of Weld Metal Proof Stress, Elongation(%) | 24 | Mechanical Properties of Weld Metal Proof Stress, Absorption Energy(J) | - |
Configura
Proprietà di base
-
Tipo
- B-33
-
Pole diameter(mm)
-
Pole length(mm)
-
Current range, lower(A)
-
Current range, vertical position, elevating, upper
-
Amount Of Content
-
Mass(g)
- 5000
- 20000
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 5 giorni o meno
- 7 giorni o meno
- 8 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.