Chiave dinamometrica preimpostata
Fare clic sull'immagine per ingrandirla.
Cliccare sull´immagine per ingrandirla.
- Sconto volumi elevati
[Features]
· The torque value to be measured can be set in advance, so it is effective when working continuously or when it is difficult to read the scale.
· It has a lock mechanism for setting measurement values.
· Can be used for measurement of left torque as well as right torque.
· The head width is short, and can be used in places that could not be reached before.
· A rubber ring is attached on the bottom of the head part which increases the degree of sealing, reducing the incidence of failure and maintaining high accuracy.
[Applications]
· For general tightening tasks.
· The torque value to be measured can be set in advance, so it is effective when working continuously or when it is difficult to read the scale.
· It has a lock mechanism for setting measurement values.
· Can be used for measurement of left torque as well as right torque.
· The head width is short, and can be used in places that could not be reached before.
· A rubber ring is attached on the bottom of the head part which increases the degree of sealing, reducing the incidence of failure and maintaining high accuracy.
[Applications]
· For general tightening tasks.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
CMPB8006
Informazioni di base
| Product Type | Stampo preimpostato | Torque adjustment range(N·m) | 150～800 | Insertion Angle(mm) | 19 |
|---|---|---|---|---|---|
| Minimum graduation(N·m) | 5 | Overall Length(mm) | 1050 | Torque Precision(±%) | 4 |
| Main body: option | Main Body | Trusco Code | 410-6067 | Mass(g) | 5800 |
| Features | The torque value to be measured can be pre-set in advance, and this is especially effective for use when work is continuous, and when gradations are difficult to read. A locking function after the measuring value has been set is included. Measuring action not only on the right torque but also on the left torque is enabled. As the head width is narrow, this can also be used to measure areas where no other devices in the past could measure. A rubber ring is attached on the bottom of the head part which increases the degree of sealing, reducing the incidence of failure and keeping high accuracy. | Application | For general tightening tasks. | Load direction | Left/ right |
Si trova sulla pagina di Chiave dinamometrica preimpostata, il codice articolo è il seguente: CMPB8006.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto CMPB8006.
Configura
Proprietà di base
-
Tipo
- CMPB
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 6 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.