Receiver Bracket (K551246)

Proprietà di base

• Tipo

  Ripristina

• Descrizione

  • Receiving bracket M6To reach any receiving position between the connecting threads.
  • Bracket M6 eco-fixplusL=100mm To create additional fastening threads for twist-proof attachment of e.g, mounting brackets or as an additional option for mounting points.
  • Receiver bracket cross hole (sideways) M6 eco-fixplusL = 100 mmFor creating any mounting positions and angles in cantilever design in the room for direct connection using an M6 threaded pinType A: internal thread M6.
  • Receiver bracket cross hole 8 mm eco-fixplusL = 100 mm To create any mounting positions and angles in a cantilever design for connecting elements with 8 mm connecting pinsType D: Bore for pin attachment Ø 8 mm pin.
  • Receiver bracket with pinhole 8 mm eco-fixplusL = 100 mm For creating any mounting positions and angles in a cantilever design in the plane, as well as for mounting cylindrical pins and other elements with 8 mm connecting pinsType D: Bore for pin attachment Ø 8 mm pin.
  • Receiver bracket eco-fix small L = 40 mm Reach any build up positions within the grid positionsof the base plates. Made of hard-anodised aluminium for best scratch and wear resistance.
  • Receiver bracket for spring clip eco-fixplusL = 65mm, ø 20 mmFor setting up a spring clip directly on the locating pinType C: Bore for location pin attachment Ø 20mm location pin.
  • Receiver bracket eco-fix large L = 70 mm Reach any build up positions within the grid positionsof the base plates. Made of hard-anodised aluminium for best scratch and wear resistance.
  • Receiver bracket 70,0mm For mounting on location pins, to reach any position, e.g. for positioning of clamping elements directly on receiving points.
  • Receiver bracket eco-fix L = 90 mm, ø 12 mm Reach any build up positions within the grid positionsof the base plates. Made of hard-anodised aluminium for best scratch and wear resistance.
  • Bracket with threadhole eco-fixplusL = 100 mmFor creating any receiving positions in a cantilever designType A: internal thread M6.
  • Bracket with threadhole eco-fixplusL = 100 mmFor creating any receiving positions in a cantilever designType A: internal thread M12.
  • Receiver bracket 120,0mm For mounting on location pins, to reach any position, e.g. for positioning of clamping elements directly on receiving points.
  • Receiver bracket eco-fix L = 120 mm, ø 20 mm Reach any build up positions within the grid positionsof the base plates. Made of hard-anodised aluminium for best scratch and wear resistance.
  • Receiver bracket 170,0mm For mounting on location pins, to reach any position, e.g. for positioning of clamping elements directly on receiving points.

  Ripristina

• Lunghezza 1(mm)

  • 40
  • 70
  • 90
  • 120
  • 170

  Ripristina

• Thread 1

  • M6

  Ripristina