GANTER Tipo speciale

?* Informazioni su tempi di consegna e prezzi

• 

  Opening handles for latches

  GANTER

  GN 120.1 opening handles are simple operating elements which are used in combination with key or bush-button actuated locking devices. They have a low installation height and can be mounted as required in a 90° grid pattern together with the lock housing.
  GN 120.1 opening handles are suitable for the following latches and locking devices:
  - Latches GN 115 (not lockable)
  - Latches GN 115 (lockable)
  - Stainless Steel-Latches GN 115
  - Hakenverriegelungen GN 115.8
  - Latches GN 119
  - Stainless Steel-Latches GN 119
  - Snap locks GN 315.1
  - Rotary clamping latches GN 516
  - Rotary clamping latches GN 516.1
  - Stainless Steel-Rotary clamping latches GN 516.5

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	1.02 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Protective caps, for latches, Plastic

  GANTER

  GN 120 protective caps are used in combination with key-actuated locking devices. These prevent dirt from entering the key mechanism and the locking device and can be mounted as required in a 90° grid pattern together with the housing of the locking device.
  GN120 protective caps are suitable for the following latches:
  - Mini-Latches GN 115.1 / GN 115.6
  - Latches GN 115
  - Hook-type latches GN 115.8
  - Latches GN 119
  - Rotary clamping latches GN 516
  - Rotary clamping latches GN 516.1
  - Stainless Steel-Rotary clamping latches GN 516.5

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	1.88 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Protective guide plates

  GANTER

  GN 120.2 protective guide plates are used in connection with door latches, using the principle of friction. They prevent the latch from causing abrasion, for example to corrosion protection layers on a door frame. They additionally prevent unintended opening, as the latches lock into a small recess in their closed position.
  If the d2 positioning tabs are not required they can easily be removed with side cutting pliers, for example.
  Latches that can be used together with GN 120.2 protective guide plates:
  - Latches GN 115 (not lockable)
  - Latches GN 115 (lockable)
  - Stainless Steel-Latches GN 115
  - Latches with cabinet "U" handel GN 115.7
  - Latches with gripping tray GN 115.10

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	1.60 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Sheet metal punches for mounting latches

  GANTER

  These sheet metal punches GN 123 allow the operator to punch in a simple way fixing holes in sheet metal doors for latches of the types GN 115, GN 115.1 and GN 119.
  Sheet metal punches GN 123 are ideally suited for punching holes into sheet metal up to 2mm thickness.
  Assembly instruction
  Set predrill hole d. We recommend using an adhesive tape with the centre of the punch hole and the datum lines showing.
  Insert pull bolt with punch.
  Attach the die, align along the datum lines and fix in place with the hexagon nut / set punch hole.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	482.12 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

Loading...