SMC Regolatori, valvole di sovrapressione（Lato mandata, tipo di collegamento：Rc）

?* Informazioni su tempi di consegna e prezzi

• • In Offerta

  

  SRH, regolatore gran purezza

  SMC

  SRH Series Clean Regulator with a pulsation suppression valve design.
  [Features]
  · Contamination-controlled stainless steel regulator.
  · Oil-free parts assembly.
  · Select between a PTFE (grade A) or fluororubber (grade B) diaphragm depending on the application.
  · Designed with an intake/exhaust port in the diaphragm compartment, facilitating flow.
  · Constructed with valve springs partitioned off by the diaphragm.
  · Pulsation-suppressing valve structure.
  · Cleaned, assembled, and inspected in a Class 100 environment and then packaged and sealed in double bags.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	243.10 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Regolatore elettropneumatico serie ITV1000 / 2000 / 3000

  SMC

  Electro-Pneumatic Regulator ITV1000/2000/3000 Series with 2 possible directions of cable entry.
  [Features]
  · Stepless control of air pressure in proportion to an electric signal.
  · Sensitivity: 0.2 kPa (100 kPa specification).
  · Linearity: within ±1% (F.S.)
  · Hysteresis: within 0.5% (F.S.)
  · Protective structure: IP65.
  · 2 possible directions of cable entry.
  · Grease-free specification (ITV1000 Series).

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	379.45 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Two-Step Core Pins -Shaft Diameter (P) Designation (0.01mm Increments) / Shaft Diameter Tolerance 0/-0.005 / Tip A·V･E Tolerance ±0.01 Type-

  SMC

  The Power Valve: Regulator Valve VEX1 Series is a large capacity relief type regulator valve.
  [Features]
  · Wide range of sizes available.
  · Connection port size: 1/8 to 2.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	93.16 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  AR*25 / 35, regolatore ad azionamento pilotato

  SMC

  [Caratteristiche] È un regolatore a rilievo con metodo di pilotaggio interno.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	146.40 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  ARP20 / 30 / 40, Regolatore modulare di precisione

  SMC

  Direct-Operated Precision Regulator, Modular Type (With Backflow Function) with sensitivity within 0.2% F.S.
  [Features]
  · Repeatability: Within ±1% F.S. (or within ±3 kPa).
  · Energy saving and air consumption reduced by 80%.
  · Type with the backflow function (ARP20K/30K/40K) can be installed between solenoid valves and cylinders.
  · Specifications with a backflow function feature an inbuilt mechanism for quickly and reliable exhausting the air-pressure at the outlet side.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	57.48 €
  	Prezzo speciale
  Consegna da ：	26 giorni

  *Prezzo unitario in configurazione base

• 

  IR1200-A~3200-A, Regolatore

  SMC

  IR1200-A/2200-A/3200-A Series high-flow-rate regulator that handles up to about twice the flow rate of conventional products.
  [Features]
  · Air consumption: 0 bleed air.
  · Lightweight type with approximately 27% weight reduction.
  · Repeatability: ±1% (full span).

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	62.98 €
  Consegna da ：	22 giorni

  *Prezzo unitario in configurazione base

• 

  Valvola riduttrice di pressione con filtro, Serie IW

  SMC

  [Caratteristiche]
  · Sono disponibili 2 tipi di set di regolazione della pressione, tipo a valvola e tipo fisso.
  · Per l’uso a bassa e alta temperatura, è possibile selezionare parti esterne prive di rame.
  · Direzione di collegamento del Manometro a pressione: 2 direzioni (anteriore, posteriore).

  A partire da∗ ：	61.77 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  AR10-40-A, regolatore modello modulare

  SMC

  SMC Regulator AR10-A to AR40-A.
  [Features]
  · Energy saving regulator.
  · Pressure drop amount: Improved by up to 50%.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	23.81 €
  	Prezzo speciale
  Consegna da ：	26 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  AR20(*)-B to AR60(*)-B, Regolatore y Regolatore con valvola di by-pass

  SMC

  SMC Regulator (With Backflow Function) AR20(K)-B To AR60(K)-B Series.
  [Features]
  · Specifications with a backflow function feature an inbuilt mechanism for quickly exhausting the air-pressure at the outlet side.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	23.81 €
  	Prezzo speciale
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  ARG20(K)~40(K), Regolarore con Pressostato

  SMC

  Regulator With Built-In Pressure Gauge ARG20/30/40 allows for one-touch installation and removal of the pressure gauge cover.
  [Features]
  · Improved visibility of the pressure gauge at various mounting locations.
  · The mounting angle of the pressure gauge can be selected according to the piping direction.
  · Pressure gauge anti-rotation mechanism.
  · Panel-cut for pressure gauge not necessary.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	57.68 €
  Consegna da ：	98 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  ARX20, regolatore per 2MPa

  SMC

  The ARX20 Series is a piston-type, small-sized regulator for 2.0 MPa.
  [Features]
  · A compact type (face-to-face dimensions: 35 mm / overall length: 80 mm).
  · 3 handy out-ports added convenience.
  · Features a user-friendly handle shape.
  · Ideal for adjusting the discharge pressure on small compressors.
  · Ideal for pressure adjustment as part of air blowing applications.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	17.77 €
  	Prezzo speciale
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Valvola di controllo della pressione AP100

  SMC

  Pressure Control Valve AP100 discharges pressure to the atmosphere when the pressure exceeds the set value.
  [Features]
  · A pressure control valve that helps maintain a constant pressure within pipes.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	25.32 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  AMR3000-6000 Series MR Unit (Regulator With Mist Separator)

  SMC

  MR Unit (Regulator with Mist Separator) that integrates a mist separator and regulator.
  [Features]
  · Filtration: 0.3 μm.
  · Helps save on space, and requires less piping.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	203.35 €
  Consegna da ：	26 giorni

  *Prezzo unitario in configurazione base

• 

  SRP1000, regolatore di precisione gran purezza

  SMC

  The SRP Series Precision Clean Regulator is a high-precision, low-flow-consumption stainless steel regulator.
  [Features]
  · Bleed volume of 0.5 L/min (ANR) or less (downstream pressure at 0.2 MPa).
  · Setting sensitivity: 0.3% F.S.
  · Repeatability: 1% F.S.
  [Applications]
  · Pressure feed of chemicals.
  · N2 blow.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	256.77 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  IR1000-A~3000-A, regolatore di precisione

  SMC

  The Precision Regulator IR1000-A/2000-A/3000-A Series boasts a high flow rate of approximately 2 times the previous series (at maximum).
  [Features]
  · Air consumption reduced by up to 90% (approx.)
  · Lightweight type with approximately 27% weight reduction.
  · Sensitivity: 0.2% (full span).
  · Repeatability: ±0.5% (full span).

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	80.35 €
  	Prezzo speciale
  Consegna da ：	26 giorni

  *Prezzo unitario in configurazione base

• 

  ARM2500 / 3000, modello modulare, regolatore serie manifold

  SMC

  Modular type manifold regulator optimal for central pressure control. Modular Type ARM2500/3000 Series.
  [Features]
  · A modular type that can be freely mounted on a manifold station.
  · Featuring a new knob with a single-action lock system.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	86.44 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  E-P HYREG Manifold Specification

  SMC

  SMC's Manifold Base Manifold Specification VVEX Series.
  [Features]
  · Using the VVEXB/2/4 Series, a manifold with up to 10 stations is possible.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	82.47 €
  Consegna da ：	98 giorni

  *Prezzo unitario in configurazione base

• 

  Two-Step Core Pins -Shaft Diameter (D) Selection / Shaft Diameter Tolerance -0.01_-0.02 / Tip A·V･E Tolerance ±0.015 Type-

  SMC

  A precision regulator from SMC.
  [Features]
  · A high precision, large capacity relief regulator.
  · A poppet-type, 3-port, large exhaust capacity regulator valve with nozzle flapper mechanism. Available as an air-operated or manual handle type.
  · Excellent pressure setting precision. Having a relief capacity equivalent to the supply capacity allows the regulator to respond quickly and set a precise secondary (outlet) pressure, even when the secondary (outlet) volume and the pressure fluctuations are large.
  · High precision.
  · Minimizes pressure fluctuations with its large-volume supply and exhaust capabilities, making it well suited to balancer applications. In addition it features high precision F.S. (full span) sensitivity within 0.2% and F.S. repeatability of within ±0.5%.
  · Manifold capable. VVEXB: 1/8 - up to 10 stations, VVEX2: 1/4 - up to 8 stations
  · Series with large product lineup. Port diameters available from M5 to 2 inches, ensuring that most flow rates and pipes can be accommodated.
  [VEX1A33/VEX1B33]
  · Minimum size.
  · Non-grease specification.
  · Available with sealing materials of NBR or FKM.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	130.44 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  ARM1000 / 2000, regolatore serie manifold

  SMC

  Manifold regulator with 4 connection methods.
  [Features]
  · Small size pressure gauge ø15 (diameter 15 mm).
  · Standard models are equipped with a backflow function.
  · Space saving.
  · Fluid: air.
  · Guaranteed pressurance resistance: 1.2 MPa.
  · Maximum operating pressure: 0.8 MPa.
  · Set pressure range (standard): 0.05 to 0.7 MPa.
  · Set pressure range (0.2 MPa setting): 0.05 to 0.2 MPa.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	22.48 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Regolatore elettropneumatico ad alta pressione Serie ITVH2000 3,0 MPa

  SMC

  Regolatore elettropneumatico ad alta pressione che supporta una pressione di alimentazione massima di 3,0 MPa.
  [Caratteristiche]
  · Conforme a RoHS.
  · Impostare il campo della pressione: da 0,2 a 2,0 MPa.
  · Stabilità: ±1% FS o meno.
  · Consumo di energia: 3 W o meno.
  · Portata massima: 3.000 l/min (ANR).
  · Parti a contatto con i fluidi: grasso al fluoro.
  · Indicatore di pressione digitale.
  · Linearità: ±1% F.S. o meno/Isteresi: 1% F.S. o meno/Ripetibilità: ±1% F.S. o meno.

  A partire da∗ ：	1,658.97 €
  Consegna da ：	26 giorni

  *Prezzo unitario in configurazione base

• 

  ITVX, Regolatore elettropneumatico per alta pressione

  SMC

  High-pressure electro-pneumatic regulator that allows stepless control of air pressure in proportion to an electric signal.
  [Features]
  · Maximum supply pressure: 5.0 MPa.
  · Set pressure range: 0.01 to 3.0 MPa.
  · Maximum flow rate: 3,000 L/min (ANR).
  · Fluid-contact parts: fluorine grease.
  · Power consumption: 3W or less.
  · Digital pressure display.
  · RoHS compliant.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	1,742.48 €
  Consegna da ：	26 giorni

  *Prezzo unitario in configurazione base

• 

  Regolatore di precisione, IR1000 / 2000 / 3000 Serie

  SMC

  · Precision regulator
  · Regulating pressure range (MPa): 0.005 to 0.8 depending on model
  · Compact and lightweight
  · Bracket & pressure gauge can be mouted on either the front or back
  · 2 air operated models

  A partire da∗ ：	80.35 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Regolatore per acqua, WR110

  SMC

  · Pressure adjustment of water line.
  · Set pressure range: 0,08 to 0,39 MPa / 0,05 to 0,69 MPa.
  · Locking system.

  A partire da∗ ：	36.16 €
  Consegna da ：	39 giorni

  *Prezzo unitario in configurazione base

Loading...