YANASE Dischi con albero（Application：Lucidatura）
| Giorni spedizione |
|
|---|
?* Informazioni su tempi di consegna e prezzi
-
Cup Disc
YANASE
A product which can polish both bottom and side surfaces at the same time.
[Features]
· The tip (bottom) can also be used for added convenience.
· Polishing cloth extends further than the shaft so the bottom and sides can be used for 2 surface simultaneous polishing.
· Unlikely to clog, allowing a uniform finish to be achieved throughout.
· It is elastic, easy to fit to the workpiece.
· Due to heat dissipation, it does not alter the polished material.
· Excellent autogenous properties.
· Ideal for polishing flat surfaces, bottom surfaces and corners- Sconto volumi elevati
A partire da∗ ： 14.92 € Consegna da ： 5 giorni *Prezzo unitario in configurazione base
-
Ruote traversino con albero
YANASE
High-quality standard products that come in a vast variety of sizes and grain sizes.
[Features]
· A wide range of sizes and particle sizes with high quality.
· Because of the slight gap between polishing cloths, it is unlikely to clog and can be used for uniform polishing throughout.
· It is elastic, so that it fits nicely onto the workpiece for close polishing.
· It is not exothermic and does not alter the polished material.
· Fits well to workpiece.
· Boasts significant autogenous action.- Sconto volumi elevati
A partire da∗ ： 7.35 € Consegna da ： 5 giorni *Prezzo unitario in configurazione base
-
Ruota Unilon con albero (tipo duro)【1-10 Pezzi per confezione】
YANASE
Ideal for removal of scratches and rust. Can also be used for hairline finishing.
[Features]
· Selectable from abundant granularity and sizes.
· It removes burrs without scraping, with no secondary burrs.
· As it is soft, elastic and has good adaptability, it prevents fatigue.- Sconto volumi elevati
A partire da∗ ： 7.55 € Consegna da ： 5 giorni *Prezzo unitario in configurazione base
-
Unilon a fungo
YANASE
Prevents overcutting of the workpiece and fits better to rounded surfaces.
[Features]
· Fits snugly due to the mushroom shape.
· Heat dissipation effects are achieved by making an overlapping layer of Unilon non-woven fabric of the same size.
· Further, since the Unilon fibers are compressed closer to the head, the strength is higher than the lower part.
· Tangled Unilon fibers act as a cushion, preventing over-grinding of the materials being abraded.
· Fits better to rounded surfaces.- Sconto volumi elevati
A partire da∗ ： 15.75 € Consegna da ： 5 giorni *Prezzo unitario in configurazione base
-
Ruota Unilon con albero
YANASE
Prevents over-scraping, and produces a uniform finished surface with no clogging.
[Features]
· Unilon's standard product.
· Because the Unilon fibers are specially coated with abrasive, the intertwined fibers play the role of cushioning and prevent excessive grinding.
· Its autogenous properties prevent clogging.
· Polishes without scratching.
· Finishes the surface without scraping the material.
· Flexible and fits perfectly to the curved surfaces.- Sconto volumi elevati
A partire da∗ ： 14.95 € Consegna da ： 5 giorni *Prezzo unitario in configurazione base
-
Cono cuscinetto
YANASE
Use alundum for general polishing and zirconia for heavy polishing such as bead polishing, etc. after welding.- Sconto volumi elevati
A partire da∗ ： 1.60 € Consegna da ： 5 giorni *Prezzo unitario in configurazione base
-
Supporto conico cuscinetto
YANASE
Since the holder part is a sponge, the contact is soft, and prevents excessive grinding.
[Features]
· Attachment when using a cushioning cone.
· Superb elasticity with the dedicated sponge.- Sconto volumi elevati
A partire da∗ ： 15.73 € Consegna da ： 8 giorni *Prezzo unitario in configurazione base
-
- In Offerta
Top ad azione singola con albero【1-10 Pezzi per confezione】
YANASE
[Features]
· This is the product you always wanted.
· The centrifugal force caused by rotation increases the diameter, making it ideal for inner surface polishing.
· Capable of heavy polishing with a soft touch.
· It is a retractable type, providing a large polishing area and beautiful finished surface.
· One-touch shaft attachment- Sconto volumi elevati
A partire da∗ ： 3.42 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Albero flessibile 1
YANASE
[Features]
· Collet chuck type, for φ3/φ6.
· Easily usable in places where work is difficult or processes which have poor work efficiency in conventional factories, leading to improved production.
· Compared to heavy electric tools and pneumatic tools, it is lighter, easier to use, and greatly reduces fatigue.- Sconto volumi elevati
A partire da∗ ： 181.38 € Consegna da ： 5 giorni *Prezzo unitario in configurazione base
-
Albero flessibile 2
YANASE
[Features]
· A drill chuck type that can be used with up to φ8.
· Easily usable in places where work is difficult or processes which have poor work efficiency in conventional factories, leading to improved production.
· Compared to heavy electric tools and pneumatic tools, it is lighter, easier to use, and greatly reduces fatigue.- Sconto volumi elevati
A partire da∗ ： 88.36 € Consegna da ： 6 giorni *Prezzo unitario in configurazione base
-
Ruote traversino con albero
YANASE
[Features]
· Because of the slight gap between polishing cloths, it is unlikely to clog and can be used for uniform polishing throughout.
· It is elastic, so that it fits nicely onto the workpiece for close polishing.
· It is not exothermic and does not alter the polished material.
· Fits well to workpiece.
· Boasts significant autogenous action.- Sconto volumi elevati
A partire da∗ ： 6.78 € Consegna da ： 5 giorni *Prezzo unitario in configurazione base
| Marchio |
|---|
| Serie prodotto |
| A partire da∗ |
| Consegna da ： |
| Application |
| Type |
| Material |
| Outer Diameter(mm) |
| Width(mm) |
| Shaft Diameter(mm) |
| Particle Size(#) |
| Stationary Diameter(mm) |
| Screw Hole Diameter(mm) |
|
|
|
|
|
|
|
|
|
|
| |
| Marchio | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE |
| Serie prodotto | Ruota Unilon con albero (tipo duro)【1-10 Pezzi per confezione】 | ||||||||||
| A partire da∗ | 14.92 € *Prezzo unitario in configurazione base Sconto volumi elevati | 7.35 € *Prezzo unitario in configurazione base Sconto volumi elevati | 7.55 € *Prezzo unitario in configurazione base Sconto volumi elevati | 15.75 € *Prezzo unitario in configurazione base Sconto volumi elevati | 14.95 € *Prezzo unitario in configurazione base Sconto volumi elevati | 1.60 € *Prezzo unitario in configurazione base Sconto volumi elevati | 15.73 € *Prezzo unitario in configurazione base Sconto volumi elevati | 3.42 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 181.38 € *Prezzo unitario in configurazione base Sconto volumi elevati | 88.36 € *Prezzo unitario in configurazione base Sconto volumi elevati | 6.78 € *Prezzo unitario in configurazione base Sconto volumi elevati |
| Consegna da ： | 5 giorni | 5 giorni | 5 giorni | 5 giorni | 5 giorni | 5 giorni | 8 giorni | Stesso giorno | 5 giorni | 6 giorni | 5 giorni |
| Application | Lucidatura | Lucidatura | Lucidatura | Lucidatura | Lucidatura | Lucidatura | Lucidatura | Lucidatura | Lucidatura | Lucidatura | Lucidatura |
| Type | Traversino con albero | Traversino con albero | Traversino con albero | Traversino con albero | Traversino con albero | Carta | Supporto | Traversino con albero | - | - | Traversino con albero |
| Material | - | - | - | - | - | - | - | - | - | - | - |
| Outer Diameter(mm) | 10 ～ 60 | 10 ～ 30 | 10 ～ 25 | 50 ～ 90 | 50 ～ 100 | - | Tip diameter ø14; Large end diameter φ20 | 10 ～ 50 | - | - | 10 ～ 50 |
| Width(mm) | 20 ～ 40 | 5 ～ 20 | 5 ～ 25 | 30 ～ 50 | 25 | - | 50 | 10 ～ 25 | - | - | 10 ～ 30 |
| Shaft Diameter(mm) | 3 ～ 6 | 3 | 3 ～ 6 | 6 | 6 | - | 6 | - | - | - | 3 ～ 6 |
| Particle Size(#) | 40 ～ 400 | 40 ～ 400 | 120 ～ 1500 | 150 ～ 600 | 120 ～ 600 | 80 ～ 150 | - | 60 ～ 240 | - | - | 40 ～ 600 |
| Stationary Diameter(mm) | - | - | - | - | - | - | - | - | - | - | - |
| Screw Hole Diameter(mm) | - | - | - | - | - | - | - | 3 ～ 6 | - | - | - |
Loading...
Seleziona per:
Stock
-
- Stock Items Included
Limitare la ricerca specificando Spec./Dim.
-
Application
- Lucidatura
- Lucidatura
-
Type
- Traversino con albero
- Fascia
- Tamburo
- Carta
- Supporto
-
Material
- Cotone
- Sisal
- Flanella
- Panno scamosciato
- Feltro
-
Outer Diameter(mm)
-
Width(mm)
-
Shaft Diameter(mm)
-
Particle Size(#)
-
Stationary Diameter(mm)
-
Screw Hole Diameter(mm)
Limitare la ricerca specificando il produttore
-
- MISUMI (2)
- ICHIGUCHI (24)
- TRUSCO NAKAYAMA (21)
- YANASE (11)
- MINITOR (9)
- MURAKO (4)
- NAKANISHI (3)
- SUMFLEX (3)
- DREMEL (2)
- H & H (1)
- NEWREGISTON (1)
- UHT (1)
- NIHON SEIMITSU KIKAI KOSAKU (0)
Limitare la ricerca specificando Tipo dati CAD
-
- 2D
- 3D
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.