Cuscinetti teste a snodo, cuscinetti sferici（Metodo di lubrificazione：Lubrificazione）

?* Informazioni su tempi di consegna e prezzi

• • Raccomandazione

  

  Sferici di attacco, supporto con filettatura maschio, BL

  THK

  The holder is perpendicular to the ball shank.
  With grease pockets on the top and bottom of the spherical area, this model has high lubricity and high wear resistance.

  • Sconto volumi elevati

  • Stock

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	7.46 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Testa a snodo, con filettatura femmina tipo PHS

  THK

  Highly rigid with superior abrasion and corrosion resistance.
  The correct amount of lubricant can be supplied to the sliding surface via the grease nipple attached to the holder.
  
  [Features]
  · Lubrication: Lubricate before use. There is a lubrication hole and oil groove on the holder, so it can be lubricated via the grease nipple.
  · Left-hand female thread identification: For left-hand female threads, the letter "L" is added. "L" is marked on the holder of the product.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	12.67 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Testa a snodo, con filettatura maschio POS

  THK

  This model is a highly rigid rod end that is basically the same as the female threaded model PHS, but has a male thread on the holder end.
  * The rod end shown in the photo is a representative product.
  Thread sizes M5 and M6 do not come with a nipple. Lubricate the bearing directly.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	12.44 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Cuscinetto sferico tipo PB

  THK

  A highly rigid spherical bearing with superior corrosion and abrasion resistance. The sliding surface of the bearing can be thoroughly lubricated from the oil groove and lubrication hole on the outer ring.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	14.03 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Testa a snodo, filettatura maschio serie POS

  OZAK

  (Features)
  Using a high precision steel bearing as the inner ring, a special copper alloy ring is inserted into the carbon steel holder structure or outer ring, providing smooth and wear-resistant self alignment, rotation and oscillating movement.

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	12.18 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Sferici di attacco, supporto con filettatura maschio, RBI

  THK

  The mounting bolt and holder are arranged on the same axis, allowing this model to bear an axial load.
  The boot contains grease, providing high lubricity and high abrasion resistance.

  • Sconto volumi elevati

  • Stock

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	10.10 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Cuscinetti per estremitá dell'asta filettatura destrorsa femmina Modello forgiato in 4 pezzi PR

  MINEBEA

  Also referred to as "Insert type," the construction features two insert pieces that are press-fitted in the body head end face from both sides. Assembly of the 4 piece rod end bearing is simple and economical, as it does not require spherical bearings like the 3 piece rod end. The body is made from S48C equivalent, providing relatively high tensile strength of 568N/mm┣sup┫2┣/sup┫ and a copper alloy insert offers resistance to seizure. This rod end bearing is widely used for construction and general industrial machinery.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	8.96 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Cuscinetto liscio sferico SA1

  THK

  [Structure and Features]
  · The spherical plain bearing is a self-aligning plain bearing designed for heavy loads. The inner and outer rings are made from high-carbon chromium bearing steel that is hardened, ground, phosphate-coated and seized with molybdenum disulfide (MoS2). The SA1 model can bear large radial loads and thrust loads in both directions. Furthermore, as it is highly impact resistant, the spherical plain bearing is most suited for low speed, heavy load rocking components such as the cylinder clevises or hinges of construction and civil engineering machinery, truck suspensions, and train bolster anchors.
  [Types and Features]
  · The SA1 model of the series is popular in Europe. The outer ring is split at one point and is narrower and thinner than the SB model, so it can be used in small spaces. Models with dust seals on both sides (SA1-UU) are also available. These seals are highly effective at keeping out dust.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	11.08 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Cuscinetto liscio sferico SB

  THK

  The most widely used series in Japan. It is used for heavy loads since the spherical contact area has a large width.
  The outer ring is split at two points to accommodate the inner ring.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	16.01 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Sfera con cuscinetto, a innesto serie PBI

  OZAK

  (Features)
  Using a high precision steel bearing as the inner ring, a special copper alloy ring is inserted into the carbon steel holder structure or outer ring, providing smooth and wear-resistant self alignment, rotation and oscillating movement.

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	12.45 €
  Consegna da ：	10 giorni

  *Prezzo unitario in configurazione base

• 

  Cuscinetti per estremitá dell'asta filettatura destrorsa maschio Modello forgiato in 4 pezzi PR-E

  MINEBEA

  Also referred to as "Insert type," the construction features two insert pieces that are press-fitted in the body head end face from both sides. Assembly of the 4 piece rod end bearing is simple and economical, as it does not require spherical bearings like the 3 piece rod end. The body is made from S48C equivalent, providing relatively high tensile strength of 568N/mm┣sup┫2┣/sup┫ and a copper alloy insert offers resistance to seizure. This rod end bearing is widely used for construction and general industrial machinery.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	9.03 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Sfera a L

  IKO

  [Caratteristiche]
  · Parte riempita di grasso.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	8.50 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Sfera del cuscino

  IKO

  [Caratteristiche]
  · Contiene una scanalatura per l’olio e un foro per l’olio sull’anello esterno.
  · Non contiene grasso.
  · Utilizzare con sufficiente lubrificazione.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	13.07 €
  Consegna da ：	8 giorni

  *Prezzo unitario in configurazione base

• 

  Cuscinetto di scorrimento sferico

  IKO

  [Caratteristiche]
  · Contiene una scanalatura per l’olio e due fori per l’olio sia sull’anello interno che su quello esterno.
  · Non contiene grasso.
  · Utilizzare con sufficiente lubrificazione.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	14.25 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Testa a snodo, filettatura femmina serie PHS

  OZAK

  (Features)
  Using a high precision steel bearing as the inner ring, a special copper alloy ring is inserted into the carbon steel holder structure or outer ring, providing smooth and wear-resistant self alignment, rotation and oscillating movement.

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	13.04 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Testa a snodo TRUSCO, tipo lubrificato, filettatura maschio【1-2 Pezzi per confezione】

  TRUSCO NAKAYAMA

  [Features]
  · Excellent abrasion and corrosion resistance with superior rigidity
  · Lubricant can be supplied to the sliding surface via a grease nipple on the body.
  
  [Applications]
  · Various transport machinery parts
  · Various manufacturing machinery parts
  · FA equipment.
  ·
  Packaging machinery parts·
  Textile machinery parts·
  Agricultural machinery parts· Robot parts.

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	14.07 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Testa a snodo TRUSCO, tipo lubrificato, filettatura femmina【1-2 Pezzi per confezione】

  TRUSCO NAKAYAMA

  [Features]
  · Excellent abrasion and corrosion resistance with superior rigidity
  · Lubricant can be supplied to the sliding surface via a grease nipple on the body.
  
  [Applications]
  · Various transport machinery parts
  · Various manufacturing machinery parts
  · FA equipment.
  ·
  Packaging machinery parts·
  Textile machinery parts·
  Agricultural machinery parts· Robot parts.

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	16.26 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

Loading...