Doppio gradino（Shaft diameter tolerance (Reference tolerance)：0/-0.02）
Selection Support: Stepped Ejector Pins
- Technical information
- STEPPED EJECTOR PINS
?* Informazioni su tempi di consegna e prezzi
-
Perni di espulsione / testa cilindrica / EN 1.3343 Equiv. / doppio passo / diametro della punta, lunghezza configurabile
MISUMI
- Dati CAD disponibili in formato 2D / 3D
Configura oraConsegna da ： Preventivo
| Marchio |
|---|
| Serie prodotto |
| CAD |
| A partire da∗ |
| Consegna da |
| Material |
| Tip diameter tolerance (Reference tolerance) |
| Shaft diameter tolerance (Reference tolerance) |
| Surface treatment |
| Head thickness |
| D (Shaft diameter)(mm) |
| P (Tip diameter)(mm) |
| Tip shape |
| Character engraving type |
| Number of engraving characters |
| Gas release shape |
| |
| Marchio | MISUMI |
| Serie prodotto | |
| CAD |
|
| A partire da∗ | - |
| Consegna da | Preventivo |
| Material | EN 1.3343 Equiv. |
| Tip diameter tolerance (Reference tolerance) | 0/-0.005 |
| Shaft diameter tolerance (Reference tolerance) | 0/-0.02 |
| Surface treatment | No |
| Head thickness | 4mm(T4) |
| D (Shaft diameter)(mm) | 1 ～ 2.5 |
| P (Tip diameter)(mm) | 0.3 ～ 1.9 |
| Tip shape | No |
| Character engraving type | No |
| Number of engraving characters | No |
| Gas release shape | No |
Loading...
Seleziona per:
-
Material
- EN 1.3343 Equiv.
-
Tip diameter tolerance (Reference tolerance)
- 0/-0.005
-
Shaft diameter tolerance (Reference tolerance)
- 0/-0.02
-
Surface treatment
- No
-
Head thickness
- 4mm(T4)
-
D (Shaft diameter)(mm)
-
P (Tip diameter)(mm)
[0.3-1.9/0.01mmpezzi]
-
Tip shape
-
Character engraving type
- No
-
Number of engraving characters
- No
-
Gas release shape
Produttore
Tipo dati CAD
-
- 2D
- 3D
Categorie collegate a Doppio gradino
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.