Con incisione（Number of engraving characters：4 characters）
Selection Support: Stepped Ejector Pins
- Technical information
- STEPPED EJECTOR PINS
?* Informazioni su tempi di consegna e prezzi
-
Perni di espulsione / testa appiattita su un lato / EN 1.3343 Equiv. / a gradini / superficie incisa convessa / diametro della punta, lunghezza configurabile
MISUMI
- Dati CAD disponibili in formato 2D / 3D
Configura oraConsegna da ： Preventivo -
Perni di espulsione / testa appiattita su un lato / acciaio per utensili / nitrurato / faccia a gradini / faccia incisa / diametro della punta, lunghezza configurabile
MISUMI
- Dati CAD disponibili in formato 2D / 3D
Configura oraConsegna da ： Preventivo
| Marchio |
|---|
| Serie prodotto |
| CAD |
| A partire da∗ |
| Consegna da |
| Material |
| Tip diameter tolerance (Reference tolerance) |
| Shaft diameter tolerance (Reference tolerance) |
| Surface treatment |
| Head thickness |
| D (Shaft diameter)(mm) |
| P (Tip diameter)(mm) |
| Tip shape |
| Character engraving type |
| Number of engraving characters |
| Gas release shape |
|
| |
| Marchio | MISUMI | MISUMI |
| Serie prodotto | ||
| CAD |
|
|
| A partire da∗ | - | - |
| Consegna da | Preventivo | Preventivo |
| Material | EN 1.3343 Equiv. | EN 1.2344 Equiv. |
| Tip diameter tolerance (Reference tolerance) | 0/-0.005 / -0.01/-0.02 | -0.01/-0.02 |
| Shaft diameter tolerance (Reference tolerance) | 0/-0.02 | 0/-0.02 |
| Surface treatment | No | Nitrided |
| Head thickness | 4mm(T4) / 6mm(JIS) / 8mm(JIS) | 6mm(JIS) / 8mm(JIS) |
| D (Shaft diameter)(mm) | 4 ～ 12 | 4 ～ 20 |
| P (Tip diameter)(mm) | 3.6 ～ 11.9 | 3.6 ～ 19.9 |
| Tip shape | No | No |
| Character engraving type | Concave character | Concave character |
| Number of engraving characters | 4 characters | 4 characters |
| Gas release shape | No | No |
Loading...
Seleziona per:
-
Material
- EN 1.3343 Equiv.
- EN 1.2344 Equiv.
-
Tip diameter tolerance (Reference tolerance)
- 0/-0.005
- -0.01/-0.02
-
Shaft diameter tolerance (Reference tolerance)
- 0/-0.02
-
Surface treatment
- No
- Nitrided
-
Head thickness
- 4mm(T4)
- 6mm(JIS)
- 8mm(JIS)
-
D (Shaft diameter)(mm)
-
P (Tip diameter)(mm)
[3.6-19.9/0.01mmpezzi]
-
Tip shape
-
Character engraving type
- Concave character
- Concave character (Sequential numbering)
-
Number of engraving characters
- 1 characters
- 2 characters
- 3 characters
- 4 characters
- 5 characters
-
Gas release shape
Produttore
Tipo dati CAD
-
- 2D
- 3D
Categorie collegate a Con incisione
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.