Risultati ricerca “GANTER_Discounts”

• • In Offerta

  

  Levelling feet with threaded stud, Steel

  GANTER

  The static load of the levelling feet GN 343.2 is limited by the load capacity of the ball joint with threaded stud (tensile strength class 5.8 (500 N/mm2)).
  The static load values (only valid for Type OS / KS) in the above table refer to a net vertical load in relation to the levelling foot. Under normal operating conditions side loading or angular loading is not uncommon and the load capacity would be considerably reduced which must be taken into consideration.
  Levelling feet GN 343.2 cannot be disassembled.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 3D

  • Componenti meccanici>
  • Intelaiature, parti di supporto, montanti>
  • Profilati in alluminio, accessori>
  • Piedi di livellamento, ancoraggi

  Configura ora
  A partire da∗ ：	6.42 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Adjustable Stainless Steel-Hand levers, threaded stud

  GANTER

  Adjustable hand levers GN 300.5 with full Stainless Steel-Handle, correspond to applications where "agressive" surrounding conditions are given, or where stainless steel materials are prescribed such as in food processing or chemical industry.
  Retaining screws with hexagon head (Type AS) comply with the requirement "prevents water from accumulating".
  Adjustable hand levers have proved to be ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
  Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 3D

  • Componenti meccanici>
  • Componenti per porte, bulloneria armadi>
  • Leve di serraggio

  Configura ora
  A partire da∗ ：	15.48 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Leveling feet, foot / threaded stud Stainless Steel

  GANTER

  The static load of the levelling feet GN 343.6 is limited by the laod capacity of the Stainless Steel ball joint with threaded stud (AISI 303).
  The static load values in the above table refer to a net vertical load in relation to the ball socket. Under normal operating conditions side loadting or angular loading is not uncommon and the load capacity would be considerable reduced which must be taken into consideration.
  Levelling feet GN 343.6 cannot be disassembled.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 3D

  • Componenti meccanici>
  • Intelaiature, parti di supporto, montanti>
  • Profilati in alluminio, accessori>
  • Piedi di livellamento, ancoraggi

  Configura ora
  A partire da∗ ：	13.54 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Stainless Steel-Levelling feet, with and without rubber underlay

  GANTER

  Stainless Steel-Levelling feet GN 41 will be delivered mounted and are not removable.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 3D

  • Componenti meccanici>
  • Intelaiature, parti di supporto, montanti>
  • Profilati in alluminio, accessori>
  • Piedi di livellamento, ancoraggi

  Configura ora
  A partire da∗ ：	6.30 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Adjustable hand levers, Zinc die casting, threaded stud Stainless Steel

  GANTER

  Adjustable hand levers GN 300.1 are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
  Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 3D

  • Componenti meccanici>
  • Componenti per porte, bulloneria armadi>
  • Leve di serraggio

  Configura ora
  A partire da∗ ：	7.46 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Adjustable hand levers, Zinc die casting, with threaded stud steel

  GANTER

  Adjustable hand levers GN 300 are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
  Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 3D

  • Componenti meccanici>
  • Componenti per porte, bulloneria armadi>
  • Leve di serraggio

  Configura ora
  A partire da∗ ：	4.72 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Clamping levers with eccentrical cam, Lever zinc die casting

  GANTER

  Clamping levers with eccentrical cam GN 927.4 with Stainless Steel-threaded stud are used for rapid clamping and releasing. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
  The lever has been designed to ensure that its movement cannot exceed the max. clamping force.
  There are no loose components since they are all assembled and mounted in their correct order.
  Type A has the following benefits:
  The distance between the lever cam and the clamping surface is adjustable via a fine pitch thread, allowing the clamping position to be set easily with maximum clamping force. Also, the position of the lever relative to the clamping axis can be determined.
  With these clamping levers with eccentrical cam GN 927.4 , clamping forces of up to 8 kN can be reached.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 3D

  • Componenti meccanici>
  • Componenti per porte, bulloneria armadi>
  • Leve di serraggio

  Configura ora
  A partire da∗ ：	12.42 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Levelling feet with mounting lug

  GANTER

  Levelling feet GN 32 will be delivered mounted and are not removable.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 3D

  • Componenti meccanici>
  • Intelaiature, parti di supporto, montanti>
  • Profilati in alluminio, accessori>
  • Piedi di livellamento, ancoraggi

  Configura ora
  A partire da∗ ：	10.76 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Levelling feet with mounting lug, steel sheet, zinc plated, with and without rub

  GANTER

  Levelling feet GN 42 will be delivered mounted and are not removable.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 3D

  • Componenti meccanici>
  • Intelaiature, parti di supporto, montanti>
  • Profilati in alluminio, accessori>
  • Piedi di livellamento, ancoraggi

  Configura ora
  A partire da∗ ：	5.82 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Levelling feet, Steel

  GANTER

  Levelling feet GN 30 will be delivered mounted and are not removable.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 3D

  • Componenti meccanici>
  • Intelaiature, parti di supporto, montanti>
  • Profilati in alluminio, accessori>
  • Piedi di livellamento, ancoraggi

  Configura ora
  A partire da∗ ：	10.50 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Levelling feet, steel sheet, zinc plated with and without rubber underlay

  GANTER

  Levelling feet GN 40 are easy and very reasonably priced foot design variants.
  Theywill be delivered mounted and are not removable.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 3D

  • Componenti meccanici>
  • Intelaiature, parti di supporto, montanti>
  • Profilati in alluminio, accessori>
  • Piedi di livellamento, ancoraggi

  Configura ora
  A partire da∗ ：	4.68 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Safety handwheels, fixed fearing flange

  GANTER

  GN 327 safety handwheels feature the ultimate in health and safety at work standards because the handwheel, if disengaged, is mounted on a fixed component, the bearing flange. The wheel is fully disengaged from the rotating shaft.
  The bearing flange can also accept the bearing of the shaft via the bearing bushing (code No. 1). This bearing bushing is a dry bearing (DU bushing). Normally, the shaft has a separate bearing and the bearing bushing serves to center the bearing flange.
  Centering can also be effected by a centering ring (code No. 2) if the appropriate bore hole has been made at the machine side. In this case there is no need for the bearing bushes and no bearing friction (heating) will occur.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 3D

  • Componenti meccanici>
  • Componenti per porte, bulloneria armadi>
  • Maniglie girevoli, manovelle

  Configura ora
  A partire da∗ ：	335.76 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Spoked handwheels, Aluminium, Cast iron

  GANTER

  Handwheels DIN 950 in cast iron are supplied with handles made of zinc plated steel. In aluminum they are supplied with handles made of plastic (Type D) and made of zinc plated steel (Type F).
  The official standard sheet only provides for types A (without handle) and G (without handle, but with thread d4), also without the handwheel diameter d1 = 180.

  • Sconto volumi elevati

  • Componenti meccanici>
  • Componenti per porte, bulloneria armadi>
  • Maniglie girevoli, manovelle

  Configura ora
  A partire da∗ ：	20.82 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Stainless Steel-Levelling feet

  GANTER

  GN 31 Stainless Steel-Levelling feet with vulcanised rubber (Type B3, B4, C3 and C4) and screw version W feature fewer dead spots owing to their construction method and are also easier to clean.
  Stainless Steel-Levelling feet GN 31 will be delivered mounted and are not removable.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 3D

  • Componenti meccanici>
  • Intelaiature, parti di supporto, montanti>
  • Profilati in alluminio, accessori>
  • Piedi di livellamento, ancoraggi

  Configura ora
  A partire da∗ ：	12.82 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Stainless Steel-Levelling feet with mounting lug

  GANTER

  Stainless Steel-Levelling feet GN 33 will be delivered mounted and are not removable.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 3D

  • Componenti meccanici>
  • Intelaiature, parti di supporto, montanti>
  • Profilati in alluminio, accessori>
  • Piedi di livellamento, ancoraggi

  Configura ora
  A partire da∗ ：	14.38 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Stainless Steel-Levelling feet with mounting lug, with and without rubber underl

  GANTER

  Stainless Steel-Levelling feet GN 43 will be delivered mounted and are not removable.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 3D

  • Componenti meccanici>
  • Intelaiature, parti di supporto, montanti>
  • Profilati in alluminio, accessori>
  • Piedi di livellamento, ancoraggi

  Configura ora
  A partire da∗ ：	7.70 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

Loading...