• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Perni centrali / forma della testa selezionabile / acciaio per utensili / nitrurato / a gradini / faccia terminale lavorata (Codici componente - Download CAD)

Perni centrali / forma della testa selezionabile / acciaio per utensili / nitrurato / a gradini / faccia terminale lavorata

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

MISUMI

MISUMI

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Codice componente:  

    L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.

  • Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
Loading...

È richiesto il plug-in per l'anteprima 3D

Download CAD

Numero di dati da visualizzare
30
45
60
  1. << Indietro
  2. 1
  3. 2
Codice componente
CPNS-5BC8-[70-500/0.01]-F[50-499.5/0.01]-A[2-7.99/0.01]-G[0.5-3.9/0.1]
CPNS-5BC9-[70-500/0.01]-F[50-499.5/0.01]-A[2-8.99/0.01]-G[0.5-3.9/0.1]
CPNS-5BC10-[70-500/0.01]-F[50-499.5/0.01]-A[2-9.99/0.01]-G[0.5-4.9/0.1]
CPNS-5BC12-[70-500/0.01]-F[50-499.5/0.01]-A[2-11.99/0.01]-G[0.5-6.4/0.1]
CPNS-5CC1.5-[70-200/0.01]-F[50-199.5/0.01]-A[0.5-1.49/0.01]-G[0.5-0.7/0.1]
CPNS-5CC2-[70-400/0.01]-F[50-399.5/0.01]-A[0.7-1.99/0.01]-G[0.5-0.9/0.1]
CPNS-5CC2.5-[70-400/0.01]-F[50-399.5/0.01]-A[0.7-2.49/0.01]-G[0.1-1.2/0.1]
CPNS-5CC3-[70-400/0.01]-F[50-399.5/0.01]-A[1-2.99/0.01]-G[0.1-1.4/0.1]
CPNS-5CC3.5-[70-400/0.01]-F[50-399.5/0.01]-A[1-3.49/0.01]-G[0.1-1.9/0.1]
CPNS-5CC4-[70-400/0.01]-F[50-399.5/0.01]-A[1-3.99/0.01]-G[0.1-1.9/0.1]
CPNS-5CC4.5-[70-400/0.01]-F[50-399.5/0.01]-A[1.5-4.49/0.01]-G[0.1-2.2/0.1]
CPNS-5CC5-[70-500/0.01]-F[50-499.5/0.01]-A[1.5-4.99/0.01]-G[0.1-2.4/0.1]
CPNS-5CC5.5-[70-500/0.01]-F[50-499.5/0.01]-A[1.5-5.49/0.01]-G[0.1-2.7/0.1]
CPNS-5CC6-[70-500/0.01]-F[50-499.5/0.01]-A[2-5.99/0.01]-G[0.1-2.9/0.1]
CPNS-5CC6.5-[70-500/0.01]-F[50-499.5/0.01]-A[2-6.49/0.01]-G[0.1-3.2/0.1]
CPNS-5CC7-[70-500/0.01]-F[50-499.5/0.01]-A[2-6.99/0.01]-G[0.1-3.4/0.1]
CPNS-5CC8-[70-500/0.01]-F[50-499.5/0.01]-A[2-7.99/0.01]-G[0.1-3.9/0.1]
CPNS-5CC9-[70-500/0.01]-F[50-499.5/0.01]-A[2-8.99/0.01]-G[0.1-4.4/0.1]
CPNS-5CC10-[70-500/0.01]-F[50-499.5/0.01]-A[2-9.99/0.01]-G[0.1-4.9/0.1]
CPNS-5CC12-[70-500/0.01]-F[50-499.5/0.01]-A[2-11.99/0.01]-G[0.1-5.9/0.1]
CPNS-5DC1.5-[70-200/0.01]-F[50-199.5/0.01]-A[0.5-1.49/0.01]-C[0.1-1.5/0.1]-G[0.5-0.7/0.1]
CPNS-5DC2-[70-400/0.01]-F[50-399.5/0.01]-A[0.7-1.99/0.01]-C[0.1-1.5/0.1]-G[0.5-0.9/0.1]
CPNS-5DC2.5-[70-400/0.01]-F[50-399.5/0.01]-A[0.7-2.49/0.01]-C[0.1-1.5/0.1]-G[0.5-1.2/0.1]
CPNS-5DC3-[70-400/0.01]-F[50-399.5/0.01]-A[1-2.99/0.01]-C[0.1-1.5/0.1]-G[0.5-1.4/0.1]
CPNS-5DC3.5-[70-400/0.01]-F[50-399.5/0.01]-A[1-3.49/0.01]-C[0.1-1.5/0.1]-G[0.5-1.7/0.1]
CPNS-5DC4-[70-400/0.01]-F[50-399.5/0.01]-A[1-3.99/0.01]-C[0.1-1.5/0.1]-G[0.5-1.9/0.1]
CPNS-5DC4.5-[70-400/0.01]-F[50-399.5/0.01]-A[1.5-4.49/0.01]-C[0.1-1.5/0.1]-G[0.5-2.2/0.1]
CPNS-5DC5-[70-500/0.01]-F[50-499.5/0.01]-A[1.5-4.99/0.01]-C[0.1-1.5/0.1]-G[0.5-2.4/0.1]
CPNS-5DC5.5-[70-500/0.01]-F[50-499.5/0.01]-A[1.5-5.49/0.01]-C[0.1-1.5/0.1]-G[0.5-2.7/0.1]
CPNS-5DC6-[70-500/0.01]-F[50-499.5/0.01]-A[2-5.99/0.01]-C[0.1-1.5/0.1]-G[0.5-2.9/0.1]
CPNS-5DC6.5-[70-500/0.01]-F[50-499.5/0.01]-A[2-6.49/0.01]-C[0.1-1.5/0.1]-G[0.1-3.2/0.1]
CPNS-5DC7-[70-500/0.01]-F[50-499.5/0.01]-A[2-6.99/0.01]-C[0.1-1.5/0.1]-G[0.5-3.4/0.1]
CPNS-5DC8-[70-500/0.01]-F[50-499.5/0.01]-A[2-7.99/0.01]-C[0.1-1.5/0.1]-G[0.5-3.9/0.1]
CPNS-5DC9-[70-500/0.01]-F[50-499.5/0.01]-A[2-8.99/0.01]-C[0.1-1.5/0.1]-G[0.5-3.9/0.1]
CPNS-5DC10-[70-500/0.01]-F[50-499.5/0.01]-A[2-9.99/0.01]-C[0.1-1.5/0.1]-G[0.5-4.9/0.1]
CPNS-5DC12-[70-500/0.01]-F[50-499.5/0.01]-A[2-11.99/0.01]-C[0.1-1.5/0.1]-G[0.5-6.4/0.1]
CPNS-5EC2-[70-400/0.01]-F[50-399.5/0.01]-A[0.7-1.99/0.01]-R[0.3-0.6/0.1]-G[0.5-0.9/0.1]
CPNS-5EC2.5-[70-400/0.01]-F[50-399.5/0.01]-A[0.7-2.49/0.01]-R[0.3-0.9/0.1]-G[0.5-1.2/0.1]
CPNS-5EC3-[70-400/0.01]-F[50-399.5/0.01]-A[1-2.99/0.01]-R[0.3-1/0.1]-G[0.5-1.4/0.1]
CPNS-5EC3.5-[70-400/0.01]-F[50-399.5/0.01]-A[1-3.49/0.01]-R[0.3-1.2/0.1]-G[0.5-1.7/0.1]
CPNS-5EC4-[70-400/0.01]-F[50-399.5/0.01]-A[1-3.99/0.01]-R[0.3-1.5/0.1]-G[0.5-1.9/0.1]
CPNS-5EC4.5-[70-400/0.01]-F[50-399.5/0.01]-A[1.5-4.49/0.01]-R[0.3-1.5/0.1]-G[0.5-2.2/0.1]
CPNS-5EC5-[70-500/0.01]-F[50-499.5/0.01]-A[1.5-4.99/0.01]-R[0.3-1.7/0.1]-G[0.5-2.4/0.1]
CPNS-5EC5.5-[70-500/0.01]-F[50-499.5/0.01]-A[1.5-5.49/0.01]-R[0.3-2/0.1]-G[0.5-2.7/0.1]
CPNS-5EC6-[70-500/0.01]-F[50-499.5/0.01]-A[2-5.99/0.01]-R[0.3-2/0.1]-G[0.5-2.9/0.1]
CPNS-5EC6.5-[70-500/0.01]-F[50-499.5/0.01]-A[2-6.49/0.01]-R[0.3-2.2/0.1]-G[0.5-3.2/0.1]
CPNS-5EC7-[70-500/0.01]-F[50-499.5/0.01]-A[2-6.99/0.01]-R[0.3-2.5/0.1]-G[0.5-3.4/0.1]
CPNS-5EC8-[70-500/0.01]-F[50-499.5/0.01]-A[2-7.99/0.01]-R[0.3-3/0.1]-G[0.5-3.9/0.1]
CPNS-5EC9-[70-500/0.01]-F[50-499.5/0.01]-A[2-8.99/0.01]-R[0.3-3.5/0.1]-G[0.5-3.9/0.1]
CPNS-5EC10-[70-500/0.01]-F[50-499.5/0.01]-A[2-9.99/0.01]-R[0.3-4/0.1]-G[0.5-4.9/0.1]
CPNS-5EC12-[70-500/0.01]-F[50-499.5/0.01]-A[2-11.99/0.01]-R[0.3-5/0.1]-G[0.5-6.4/0.1]
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
RoHSHead thickness Shaft diameter tolerance D/P (Shaft diameter)
(mm) 		Step (Step shape) Shape (Tip shape) A (Tip part)
(mm) 		C (Tip part)
(mm) 		F (Shaft diameter length)
(mm) 		G (Tip C chamfering width on the tip part)
(mm) 		K (Tip part angle)
(°) 		L (L dimension)
(mm) 		Q (Tip R chamfering on the tip part)
(mm) 		R (Tip part)
(mm) 		S (Tip tapered width on the tip part)
(mm)

-

1 Preventivo 104mm(T4)-0.01/-0.028BC2 ～ 7.99-50 ～ 499.50.5 ～ 3.9-70 ～ 500---

-

1 Preventivo 104mm(T4)-0.01/-0.029BC2 ～ 8.99-50 ～ 499.50.5 ～ 3.9-70 ～ 500---

-

1 Preventivo 104mm(T4)-0.01/-0.0210BC2 ～ 9.99-50 ～ 499.50.5 ～ 4.9-70 ～ 500---

-

1 Preventivo 104mm(T4)-0.01/-0.0212BC2 ～ 11.99-50 ～ 499.50.5 ～ 6.4-70 ～ 500---

-

1 Preventivo 104mm(T4)-0.01/-0.021.5CC0.5 ～ 1.49-50 ～ 199.50.5 ～ 0.7-70 ～ 200---

-

1 Preventivo 104mm(T4)-0.01/-0.022CC0.7 ～ 1.99-50 ～ 399.50.5 ～ 0.9-70 ～ 400---

-

1 Preventivo 104mm(T4)-0.01/-0.022.5CC0.7 ～ 2.49-50 ～ 399.50.1 ～ 1.2-70 ～ 400---

-

1 Preventivo 104mm(T4)-0.01/-0.023CC1 ～ 2.99-50 ～ 399.50.1 ～ 1.4-70 ～ 400---

-

1 Preventivo 104mm(T4)-0.01/-0.023.5CC1 ～ 3.49-50 ～ 399.50.1 ～ 1.9-70 ～ 400---

-

1 Preventivo 104mm(T4)-0.01/-0.024CC1 ～ 3.99-50 ～ 399.50.1 ～ 1.9-70 ～ 400---

-

1 Preventivo 104mm(T4)-0.01/-0.024.5CC1.5 ～ 4.49-50 ～ 399.50.1 ～ 2.2-70 ～ 400---

-

1 Preventivo 104mm(T4)-0.01/-0.025CC1.5 ～ 4.99-50 ～ 499.50.1 ～ 2.4-70 ～ 500---

-

1 Preventivo 104mm(T4)-0.01/-0.025.5CC1.5 ～ 5.49-50 ～ 499.50.1 ～ 2.7-70 ～ 500---

-

1 Preventivo 104mm(T4)-0.01/-0.026CC2 ～ 5.99-50 ～ 499.50.1 ～ 2.9-70 ～ 500---

-

1 Preventivo 104mm(T4)-0.01/-0.026.5CC2 ～ 6.49-50 ～ 499.50.1 ～ 3.2-70 ～ 500---

-

1 Preventivo 104mm(T4)-0.01/-0.027CC2 ～ 6.99-50 ～ 499.50.1 ～ 3.4-70 ～ 500---

-

1 Preventivo 104mm(T4)-0.01/-0.028CC2 ～ 7.99-50 ～ 499.50.1 ～ 3.9-70 ～ 500---

-

1 Preventivo 104mm(T4)-0.01/-0.029CC2 ～ 8.99-50 ～ 499.50.1 ～ 4.4-70 ～ 500---

-

1 Preventivo 104mm(T4)-0.01/-0.0210CC2 ～ 9.99-50 ～ 499.50.1 ～ 4.9-70 ～ 500---

-

1 Preventivo 104mm(T4)-0.01/-0.0212CC2 ～ 11.99-50 ～ 499.50.1 ～ 5.9-70 ～ 500---

-

1 Preventivo 104mm(T4)-0.01/-0.021.5DC0.5 ～ 1.490.1 ～ 1.550 ～ 199.50.5 ～ 0.7-70 ～ 200---

-

1 Preventivo 104mm(T4)-0.01/-0.022DC0.7 ～ 1.990.1 ～ 1.550 ～ 399.50.5 ～ 0.9-70 ～ 400---

-

1 Preventivo 104mm(T4)-0.01/-0.022.5DC0.7 ～ 2.490.1 ～ 1.550 ～ 399.50.5 ～ 1.2-70 ～ 400---

-

1 Preventivo 104mm(T4)-0.01/-0.023DC1 ～ 2.990.1 ～ 1.550 ～ 399.50.5 ～ 1.4-70 ～ 400---

-

1 Preventivo 104mm(T4)-0.01/-0.023.5DC1 ～ 3.490.1 ～ 1.550 ～ 399.50.5 ～ 1.7-70 ～ 400---

-

1 Preventivo 104mm(T4)-0.01/-0.024DC1 ～ 3.990.1 ～ 1.550 ～ 399.50.5 ～ 1.9-70 ～ 400---

-

1 Preventivo 104mm(T4)-0.01/-0.024.5DC1.5 ～ 4.490.1 ～ 1.550 ～ 399.50.5 ～ 2.2-70 ～ 400---

-

1 Preventivo 104mm(T4)-0.01/-0.025DC1.5 ～ 4.990.1 ～ 1.550 ～ 499.50.5 ～ 2.4-70 ～ 500---

-

1 Preventivo 104mm(T4)-0.01/-0.025.5DC1.5 ～ 5.490.1 ～ 1.550 ～ 499.50.5 ～ 2.7-70 ～ 500---

-

1 Preventivo 104mm(T4)-0.01/-0.026DC2 ～ 5.990.1 ～ 1.550 ～ 499.50.5 ～ 2.9-70 ～ 500---

-

1 Preventivo 104mm(T4)-0.01/-0.026.5DC2 ～ 6.490.1 ～ 1.550 ～ 499.50.1 ～ 3.2-70 ～ 500---

-

1 Preventivo 104mm(T4)-0.01/-0.027DC2 ～ 6.990.1 ～ 1.550 ～ 499.50.5 ～ 3.4-70 ～ 500---

-

1 Preventivo 104mm(T4)-0.01/-0.028DC2 ～ 7.990.1 ～ 1.550 ～ 499.50.5 ～ 3.9-70 ～ 500---

-

1 Preventivo 104mm(T4)-0.01/-0.029DC2 ～ 8.990.1 ～ 1.550 ～ 499.50.5 ～ 3.9-70 ～ 500---

-

1 Preventivo 104mm(T4)-0.01/-0.0210DC2 ～ 9.990.1 ～ 1.550 ～ 499.50.5 ～ 4.9-70 ～ 500---

-

1 Preventivo 104mm(T4)-0.01/-0.0212DC2 ～ 11.990.1 ～ 1.550 ～ 499.50.5 ～ 6.4-70 ～ 500---

-

1 Preventivo 104mm(T4)-0.01/-0.022EC0.7 ～ 1.99-50 ～ 399.50.5 ～ 0.9-70 ～ 400-0.3 ～ 0.6-

-

1 Preventivo 104mm(T4)-0.01/-0.022.5EC0.7 ～ 2.49-50 ～ 399.50.5 ～ 1.2-70 ～ 400-0.3 ～ 0.9-

-

1 Preventivo 104mm(T4)-0.01/-0.023EC1 ～ 2.99-50 ～ 399.50.5 ～ 1.4-70 ～ 400-0.3 ～ 1-

-

1 Preventivo 104mm(T4)-0.01/-0.023.5EC1 ～ 3.49-50 ～ 399.50.5 ～ 1.7-70 ～ 400-0.3 ～ 1.2-

-

1 Preventivo 104mm(T4)-0.01/-0.024EC1 ～ 3.99-50 ～ 399.50.5 ～ 1.9-70 ～ 400-0.3 ～ 1.5-

-

1 Preventivo 104mm(T4)-0.01/-0.024.5EC1.5 ～ 4.49-50 ～ 399.50.5 ～ 2.2-70 ～ 400-0.3 ～ 1.5-

-

1 Preventivo 104mm(T4)-0.01/-0.025EC1.5 ～ 4.99-50 ～ 499.50.5 ～ 2.4-70 ～ 500-0.3 ～ 1.7-

-

1 Preventivo 104mm(T4)-0.01/-0.025.5EC1.5 ～ 5.49-50 ～ 499.50.5 ～ 2.7-70 ～ 500-0.3 ～ 2-

-

1 Preventivo 104mm(T4)-0.01/-0.026EC2 ～ 5.99-50 ～ 499.50.5 ～ 2.9-70 ～ 500-0.3 ～ 2-

-

1 Preventivo 104mm(T4)-0.01/-0.026.5EC2 ～ 6.49-50 ～ 499.50.5 ～ 3.2-70 ～ 500-0.3 ～ 2.2-

-

1 Preventivo 104mm(T4)-0.01/-0.027EC2 ～ 6.99-50 ～ 499.50.5 ～ 3.4-70 ～ 500-0.3 ～ 2.5-

-

1 Preventivo 104mm(T4)-0.01/-0.028EC2 ～ 7.99-50 ～ 499.50.5 ～ 3.9-70 ～ 500-0.3 ～ 3-

-

1 Preventivo 104mm(T4)-0.01/-0.029EC2 ～ 8.99-50 ～ 499.50.5 ～ 3.9-70 ～ 500-0.3 ～ 3.5-

-

1 Preventivo 104mm(T4)-0.01/-0.0210EC2 ～ 9.99-50 ～ 499.50.5 ～ 4.9-70 ～ 500-0.3 ～ 4-

-

1 Preventivo 104mm(T4)-0.01/-0.0212EC2 ～ 11.99-50 ～ 499.50.5 ～ 6.4-70 ～ 500-0.3 ～ 5-

Loading...

  1. << Indietro
  2. 1
  3. 2
 

Informazioni di base

Material SKD61 Surface treatment Nitrided Applicable sleeve hole diameter tolerance +0.01/0 or H7
With/without cooling hole No

Configura

Ripristina

111Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Head thickness

    • 4mm(T4)
    • 6mm(JIS)
    • 8mm(JIS)

    Ripristina

  • Shaft diameter tolerance

    • -0.01/-0.02

    Ripristina

  • D/P (Shaft diameter)(mm)

    • 1.5
    • 2
    • 2.5
    • 3
    • 3.5
    • 4
    • 4.5
    • 5
    • 5.5
    • 6
    • 6.5
    • 7
    • 8
    • 9
    • 10
    • 12
    • 16

    Ripristina

  • Step (Step shape)

    • B
    • C
    • D
    • E

    Ripristina

  • A (Tip part)(mm)

     [0.5-15.99/0.01mmpezzi]

    Ripristina

  • C (Tip part)(mm)

     [0.1-1.5/0.1mmpezzi]

    Ripristina

  • F (Shaft diameter length)(mm)

     [50-699.5/0.01mmpezzi]

    Ripristina

  • G (Tip C chamfering width on the tip part)(mm)

     [0.1-6.4/0.1mmpezzi]

    Ripristina

  • K (Tip part angle)(°)

     

    Ripristina

  • L (L dimension)(mm)

     [70-700/0.01mmpezzi]

    Ripristina

  • Q (Tip R chamfering on the tip part)(mm)

     

    Ripristina

  • R (Tip part)(mm)

     [0.3-5/0.1mmpezzi]

    Ripristina

  • S (Tip tapered width on the tip part)(mm)

     

    Ripristina

  • Tipo

    • CPJS-5B
    • CPJS-5BB
    • CPJS-5BC
    • CPJS-5BG
    • CPJS-5BR
    • CPJS-5BT
    • CPJS-5C
    • CPJS-5CB
    • CPJS-5CC
    • CPJS-5CG
    • CPJS-5CR
    • CPJS-5CT
    • CPJS-5D
    • CPJS-5DB
    • CPJS-5DC
    • CPJS-5DG
    • CPJS-5DR
    • CPJS-5DT
    • CPJS-5E
    • CPJS-5EB
    • CPJS-5EC
    • CPJS-5EG
    • CPJS-5ER
    • CPJS-5ET
    • CPNS-5B
    • CPNS-5BB
    • CPNS-5BC
    • CPNS-5BG
    • CPNS-5BR
    • CPNS-5BT
    • CPNS-5C
    • CPNS-5CB
    • CPNS-5CC
    • CPNS-5CG
    • CPNS-5CR
    • CPNS-5CT
    • CPNS-5D
    • CPNS-5DB
    • CPNS-5DC
    • CPNS-5DG
    • CPNS-5DR
    • CPNS-5DT
    • CPNS-5E
    • CPNS-5EB
    • CPNS-5EC
    • CPNS-5EG
    • CPNS-5ER
    • CPNS-5ET

    Ripristina

  • Shape (Tip shape)

    • No processing
    • C
    • G
    • T
    • R
    • B

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.