TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model (TSC-PSXS1)
Fare clic sull'immagine per ingrandirla.
Cliccare sull´immagine per ingrandirla.
- Sconto volumi elevati
Dettagli del prodotto:
Codice articolo del costruttore: TSC-PSXS1
Marca: MISUMI
Prezzo: 51.31 €
Tempi di consegna: 5 giorni
Dati Tecnici:
Outer Diameter (D): 1 φ
Flute Length (ℓ): 2 mm
Number of Flutes: 4 sheet
Shank Diameter (d): 6 mm
Overall Length (L): 60 mm
- TS
- General Steel
- Multi-Flutes （5 ~）
- S (Short)
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
TSC-PSXS1
Codice componente
|
|---|
| TSC-PSXS1 |
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Number of Flutes (sheet) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Additional Classification | Tolerance of OD (mm) | Figure | ● Inventory Product □ Manufacturer Product | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
51.31 € | 1 | Disponibile | 5 giorni | 1 | 2 | 4 | 6 | 60 | - | Flat Surface / Side Surface / Inclined Cutting | Stocked Product | -0.014 ~ -0.028 | 1 | ● |
Loading...
Specifiche
| Model Number | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Number of Flutes | Figure | |
| Outer Diameter D |
||||||
| TSC-PSXS | 1 | 2 | 60 | 6 | 4 | 1 |
| 2 | 4 | 60 | 6 | 4 | 1 | |
| 3 | 6 | 60 | 6 | 4 | 1 | |
| 4 | 8 | 60 | 6 | 4 | 1 | |
| 5 | 10 | 60 | 6 | 4 | 1 | |
| 6 | 12 | 60 | 6 | 6 | 2 | |
| 8 | 16 | 75 | 8 | 6 | 2 | |
| 10 | 20 | 80 | 10 | 6 | 2 | |
| 12 | 24 | 100 | 12 | 6 | 2 |
For Cutting Conditions, Refer to >>Click here.
Più Informazioni
● The positive finish of the rake angle, sharp edge processing of the bottom blade corners and 53° strong twist deliver strength when finishing pocket vertical wall surfaces of mold bases (holding blocks), and when machining raw materials, heat-treated steel and aluminum.
● The TS film coating with much greater oxidation resistance and hardness than conventional films exhibits excellent durability, even with raw carbon steel materials, in addition to heat-treated steel.
● The tool has a high rigidity, reducing the chances of tool breakage to a minimum when cutting side surfaces.
Informazioni di base
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Acciaio inox / Ghisa / Aluminum Alloy / Copper Alloy | Model | Highly-Helical | Coating | For High Hardness (Silicone-Based) |
|---|---|---|---|---|---|
| Geometry | Sharp Corner | Torsion Angle (θ) | Powerful Helix (45° to 60°) |
Si trova sulla pagina di TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model, il codice articolo è il seguente: TSC-PSXS1.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto TSC-PSXS1.
Configura
Proprietà di base
-
Length Under Neck (ℓ1)(mm)
-
Processing Applications
- Flat Surface
- Side Surface
- Inclined Cutting
-
Tipo
- SN-TSC-PSXS
- SNR-TSC-PSXS
- TSC-PSXS
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Number of Flutes(sheet)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Additional Classification
- Cutting Edge R Processing
- Standard Neck Relief
- Stocked Product
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 5 giorni o meno
- 7 giorni o meno
- 8 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Tipologia prodotto
| Codice componente |
|---|
| TSC-PSXS10 |
| TSC-PSXS12 |
| TSC-PSXS2 |
| TSC-PSXS3 |
| TSC-PSXS4 |
| TSC-PSXS5 |
| Codice componente | Prezzo unitario standard | Quantità minima d'ordine | Sconto volumi elevati | Giorni spedizione standard ? | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Number of Flutes (sheet) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Additional Classification | Tolerance of OD (mm) | Figure | ● Inventory Product □ Manufacturer Product |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
91.98 € | 1 | Disponibile | 5 giorni | 10 | 20 | 6 | 10 | 80 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | -0.025 ~ -0.045 | 2 | ● | |
112.95 € | 1 | Disponibile | 5 giorni | 12 | 24 | 6 | 12 | 100 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | -0.032 ~ -0.059 | 2 | ● | |
42.79 € | 1 | Disponibile | 5 giorni | 2 | 4 | 4 | 6 | 60 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | -0.014 ~ -0.028 | 1 | ● | |
46.03 € | 1 | Disponibile | 5 giorni | 3 | 6 | 4 | 6 | 60 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | -0.014 ~ -0.028 | 1 | ● | |
67.44 € | 1 | Disponibile | 5 giorni | 4 | 8 | 4 | 6 | 60 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | -0.020 ~ -0.038 | 1 | ● | |
74.07 € | 1 | Disponibile | 5 giorni | 5 | 10 | 4 | 6 | 60 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | -0.020 ~ -0.038 | 1 | ● |
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.