DLC Coated Carbide Stepped Drill for Aluminum Machining, Stub
Fare clic sull'immagine per ingrandirla.
Cliccare sull´immagine per ingrandirla.
- Sconto volumi elevati
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
Codice componente
|
|---|
| DLC-SC-SDR6.8-24 |
| DLC-SF-SDR8.5-20 |
| DLC-SF-SDR8.5-30 |
| DLC-SF-SDR10.3-36 |
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | Hole diameter (drill diameter) D (mm) | Groove Length L (mm) | Overall Length L (mm) | Step Length ℓ (mm) | Shank Diameter d | Diameter Tolerance | Tolerance of Shank Diameter | Use | Major Diameter D1 (φ) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
94.39 € | 1 | Disponibile | 5 giorni | 6.8 | 48 | 104 | 24 | 10 | 0 ~ -0.018 | 0 ~ -0.009 | For Chamfering | 10 | |
94.44 € | 1 | Disponibile | 5 giorni | 8.5 | 50 | 112 | 20 | 12 | 0 ~ -0.018 | 0 ~ -0.011 | Cutting | 12 | |
100.03 € | 1 | Disponibile | 5 giorni | 8.5 | 60 | 122 | 30 | 12 | 0 ~ -0.018 | 0 ~ -0.011 | Cutting | 12 | |
125.45 € | 1 | Disponibile | 5 giorni | 10.3 | 72 | 136 | 36 | 14 | 0 ~ -0.022 | 0 ~ -0.011 | Cutting | 14 |
Loading...
Specifiche
| Model Number | Step Length ℓ | Large Diameter D1 | Groove Length ℓ1 | Overall Length L | Shank Diameter d | |
| Tip Diameter D | ||||||
| DLC-SC-SDR (For chamfering) DLC-SF-SDR (For cutting) | 3.4 | 8 | 6 | 21 | 73 | 6 |
| 12 | 6 | 25 | 77 | 6 | ||
| 4.3 | 10 | 7 | 26 | 79 | 7 | |
| 15 | 7 | 31 | 84 | 7 | ||
| 5.1 | 12 | 8 | 30 | 84 | 8 | |
| 18 | 8 | 36 | 90 | 8 | ||
| 6.8 | 16 | 10 | 40 | 96 | 10 | |
| 24 | 10 | 48 | 104 | 10 | ||
| 8.5 | 20 | 12 | 50 | 112 | 12 | |
| 30 | 12 | 60 | 122 | 12 | ||
| 10.3 | 24 | 14 | 60 | 124 | 14 | |
| 36 | 14 | 72 | 136 | 14 |
For Cutting Conditions, Refer to >>Click here.
Più Informazioni
● The DLC coating has excellent wear-resistant and welding-resistant properties that make it ideal for machining non-ferrous metals such as aluminum, copper, etc.
● A strong torsion shape provides superior discharge of cutting chips and cutting capability.
● Designed for very frequent drilling of pilot holes for M4 – M12 metric coarse thread.
● Two models of step angle are available for chamfering and cutting.
● High-efficiency hole drilling is achieved by reducing the chamfering process. (DLC-SC-SDR)
● When drilling pilot holes for bolts, relief holes can also be drilled at the same time. (DLC-SF-SDR)
Informazioni di base
| work material | Ghisa / Alluminio / Rame | Tool Material Type | Carburo | Shank Type | Straight Shank |
|---|---|---|---|---|---|
| Coating Y/N | Included | Coating Type | DLC | With/without Oil Hole | None |
| Point Angle(°) | 130 | Thinning | Included |
Configura
Proprietà di base
-
Hole diameter (drill diameter) D(mm)
-
Groove Length L(mm)
-
Overall Length L(mm)
-
Step Length ℓ(mm)
-
Tipo
- DLC-SC-SDR
- DLC-SF-SDR
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 5 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.