Guarnizione in elastomero anello di centraggio esterno NW 16-63 (Codici componente)
- Sconto volumi elevati
Misumi offers a range of reassuring and reliable Evac brands.
[Features]
· The elastomer seal is a standard sealing part for NW/KF piping.
· Outer center rings with high corrosion resistance and high-pressure support as well as inner center rings which are suitable for use in high temperature and high vacuum environments.
· Guide rings in fluoropolymer, aluminum, or stainless steel (SUS316L).
· Standardization of fluoropolymer guide ring and FEP O-ring type for high corrosion resistant applications.
· The FEP O-ring withstands environments with temperatures between -50°C and 200°C.
· Evac Viton® O-rings can withstand temperatures of up to 200℃ continuously.
· Can be used for vacuum of 10-7 Pa.
· Can be used in pressures of up to 2 MPa.
· The inner ring and outer ring also prevent excessive torque on the clamp.
[Features]
· The elastomer seal is a standard sealing part for NW/KF piping.
· Outer center rings with high corrosion resistance and high-pressure support as well as inner center rings which are suitable for use in high temperature and high vacuum environments.
· Guide rings in fluoropolymer, aluminum, or stainless steel (SUS316L).
· Standardization of fluoropolymer guide ring and FEP O-ring type for high corrosion resistant applications.
· The FEP O-ring withstands environments with temperatures between -50°C and 200°C.
· Evac Viton® O-rings can withstand temperatures of up to 200℃ continuously.
· Can be used for vacuum of 10-7 Pa.
· Can be used in pressures of up to 2 MPa.
· The inner ring and outer ring also prevent excessive torque on the clamp.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
34.040037.121.840
- Dati prodotto
- Dati CAD non disponibili
Informazioni di base
| Type | Anelli centrali | Center Ring Type | Center Ring with Outer Ring | Applicable Flange Size (Nominal) | 32/40 |
|---|---|---|---|---|---|
| Center Ring (or Inner Ring) Material | Alluminio + Viton | Temperature Range | -20°C～+200°C | Dimension A(mm) | 55 |
| Dimension C(mm) | 40 | Dimension J(mm) | 48 |
Si trova sulla pagina di Guarnizione in elastomero anello di centraggio esterno NW 16-63, il codice articolo è il seguente: 34.040037.121.840.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto 34.040037.121.840.
Configura
Proprietà di base
-
Tipo
- NW 16-63
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 5 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.