• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Penetratore in diamante Rockwell, standard

Penetratore in diamante Rockwell, standard

MITUTOYO

MITUTOYO

Mitutoyo indenters for Rockwell hardness test. As the interface between machine and material, the indenter must be of immaculate quality. Therefore Mitutoyo only uses diamond indenters from the most experienced suppliers. The indenters are calibrated in the highest standard calibration laboratories in the DAkkS accreditation body, accredited according to ISO 17025 and traceable to the PTB.Constant development at our calibration partners secures an unmatched quality level. Rockwell diamond indenter feature DAkkS calibration certificates according to DIN EN ISO 6508-2 and/or ASTM E18. A function test, verifying the applicability of the indenter in regard of various indentation depth levels under different test forces, is optionally available. Ball holders are made by Mitutoyo, and are supplied without calibration certificate for the included ball.

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

 
Numero di dati da visualizzare
30
45
60
  1. 1
Codice componente
63DIA001
63DIA002
63DIA004
63DIA006
63DIA007
63DIA008
63DIA009
Codice componenteRelativo a
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
Descrizione Materiale Tipo

Scheda dati

965.79 €

1 60 giorni ---

Scheda dati

418.42 €

1 60 giorni ---

Scheda dati

980.26 €

1 60 giorni ---

Scheda dati

1,010.53 €

1 60 giorni Rockwell diamond indenter with DAkkS calibration certificate and function test according to DIN EN ISO 6508-2 for HRA, HRC, HRD and HRN scales. Additionally to the geometrical specification for the calibration of Rockwell diamond indenters, a „function test“ is described in the relevant standards ISO 6508-2 and ASTM E-18.The intention of the function test is to verify the applicability of the indenter in regard of various indentation depth levels under different test forces. This indenter can be used from 10HRC as the polished and calibrated length of the diamond is longer than usual. Suitable for all Mitutoyo Rockwell hardness testing machines.diamondDiamond cone indenter

Scheda dati

561.84 €

1 60 giorni Rockwell ball indenter with 12,7mm 1/2" steel ball for Rockwell plastic test according to ISO 2039-2. Calibration certificate not included.AcciaioPenetratore a sfera

Scheda dati

1,044.74 €

1 60 giorni Penetratore di diamante Rockwell con certificato di taratura DAkkS senza test funzionale secondo DIN EN ISO 6508-2 per scale di misura HRA, HRC, HRD e HRN. Adatto per l'intera serie HR-500. Supporta misure interne da un diametro di 22,0 mm.diamondDiamond cone indenter

Scheda dati

1,040.79 €

1 60 giorni Rockwell diamond indenter with DAkkS calibration certificate and function test according to DIN EN ISO 6508-2 for HRA, HRC, HRD and HRN scales. Additionally to the geometrical specification for the calibration of Rockwell diamond indenters, a „function test“ is described in the relevant standards ISO 6508-2 and ASTM E-18.The intention of the function test is to verify the applicability of the indenter in regard of various indentation depth levels under different test forces. Suitable for all Mitutoyo Rockwell hardness testing machines.diamondDiamond cone indenter

Loading...

  1. 1

Informazioni di base

Product Type Controllo durezza

Configura

Ripristina

7Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Descrizione

    • Rockwell ball indenter with 12,7mm 1/2" steel ball for Rockwell plastic test according to ISO 2039-2. Calibration certificate not included.
    • Penetratore di diamante Rockwell con certificato di taratura DAkkS senza test funzionale secondo DIN EN ISO 6508-2 per scale di misura HRA, HRC, HRD e HRN. Adatto per l'intera serie HR-500. Supporta misure interne da un diametro di 22,0 mm.
    • Rockwell diamond indenter with DAkkS calibration certificate and function test according to DIN EN ISO 6508-2 for HRA, HRC, HRD and HRN scales. Additionally to the geometrical specification for the calibration of Rockwell diamond indenters, a „function test“ is described in the relevant standards ISO 6508-2 and ASTM E-18.The intention of the function test is to verify the applicability of the indenter in regard of various indentation depth levels under different test forces. Suitable for all Mitutoyo Rockwell hardness testing machines.
    • Rockwell diamond indenter with DAkkS calibration certificate and function test according to DIN EN ISO 6508-2 for HRA, HRC, HRD and HRN scales. Additionally to the geometrical specification for the calibration of Rockwell diamond indenters, a „function test“ is described in the relevant standards ISO 6508-2 and ASTM E-18.The intention of the function test is to verify the applicability of the indenter in regard of various indentation depth levels under different test forces. This indenter can be used from 10HRC as the polished and calibrated length of the diamond is longer than usual. Suitable for all Mitutoyo Rockwell hardness testing machines.

    Ripristina

  • Materiale

    • Acciaio
    • diamond

    Ripristina

  • Tipo

    • Diamond cone indenter
    • Penetratore a sfera

    Ripristina

  • Tipo

    Ripristina

Filtrare per giorni di spedizione standard

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.