GANTER Pistoncini（Materiale corpo：Acciaio inox）
Limitare la ricerca specificando Tipo
-
Manopola standard -
Con leva -
Con anello -
Componenti annessi -
Senza manopola -
Manopole speciali
?* Informazioni su tempi di consegna e prezzi
-
- In Offerta
Cam action indexing plungers, Stainless Steel
GANTER
Stainless Steel-Cam action indexing plungers GN 612 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A groove is provided in either position to prevent the lock from rotating.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 17.32 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Mini indexing plungers, open indexing mechanism, with red knob
GANTER
Mini indexing plungers GN 822.1 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.
Type C with rest position is used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 6.38 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Stainless Steel-Indexing plungers, removable
GANTER
Indexing plungers GN 817.8 have been designed such that special versions of the indexing pins can also be made economically in smaller unit quantities.
If reqired, the indexing pins can be machined or made by the user as shown in the drawing above. They are assembled with a countersunk screw and can therefore be assembled several times. All parts are supplied in a non-assembled set.
The indexing plungers type C / CK are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 17.90 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plungers, Stainless Steel, with knob, with and without rest position
GANTER
GN 717 Stainless Steel-Indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 5.52 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Stainless Steel-Cam action indexing plungers for welding
GANTER
Stainless Steel-Cam action indexing plungers GN 612.3 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A notch keeps the plunger in this position.
The square body can therefore be welded in any required position. In order to prevent a change in the spring load by the transferred heat we recommend spot welding the plunger body.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 25.90 € Consegna da ： 7 giorni *Prezzo unitario in configurazione base
-
- In Offerta
Stainless Steel-Indexing plungers with T-handle
GANTER
Stainless Steel-Indexing plungers GN 817.4 are similar to GN 817, but with a T-handle instead of a round head.
This shape allows better visual orientation of the indexing position of Type C and is advantageous when greater unlocking forces occur.
Type C with rest position is used in such applications where the plunger must not protrude continually. In that case the knob is retracted and afterwards turned by 90°. A notch keeps the plunger in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 17.96 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Stainless Steel-Indexing plungers, with lifting ring / with wire loop, without r
GANTER
GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 4.38 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plungers with rest position, Stainless Steel / Plastic knob
GANTER
Stainless Steel-Indexing plungers GN 617.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted.
A notch keeps the plunger in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 14.98 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Indexing plungers, Stainless Steel / plastic knob
GANTER
Type G or GK of the indexing plungers GN 613 have been designed for applications where the indexing plunger is not operated with the standard knob.
The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.
A special screw driver GN 613.1 is available. Two slots are provided in the upper end of the body which are accessible with the knob in its retracted position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 11.28 € Consegna da ： 3 giorni *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plungers, Stainless Steel / Plastic knob
GANTER
Type G or GK of the GN 617 indexing plungers have been designed for applications where the indexing plunger is not operated with the standard knob.
The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 13.00 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plungers, Stainless Steel / Plastic-knob
GANTER
Stainless Steel-Indexing plungers GN 607.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
Stainless Steel-Indexing plungers GN 607.1 are distinguished for their small dimensions. The extremely low Stainless Steel-Lock nuts GN 909.5 enlarge the mounting options. The locking tab is an integral part of the knob thus giving reliable operation at all times.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 23.32 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plungers, Stainless Steel / Plastic-knob
GANTER
Stainless Steel-Indexing plungers GN 607 are distinguished for their small dimensions.
The extremely low Stainless Steel-Lock nuts GN 909.5 enlarge the mounting options.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 15.32 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Mini indexing plungers, covered indexing mechanism
GANTER
Mini indexing plungers GN 822 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.
They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
With Type C the knob can be turned by 30° and a notch keeps the knob in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 6.32 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Mini indexing plungers, covered indexing mechanism, with red knob
GANTER
Mini indexing plungers GN 822 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.
They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
With type C the knob can be turned by 30° and a notch keeps the knob in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 6.32 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Mini indexing plungers, open indexing mechanism
GANTER
Mini indexing plungers GN 822.1 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.
Type C with rest position is used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 6.38 € Consegna da ： 7 giorni *Prezzo unitario in configurazione base
-
- In Offerta
Spring latches with flange for surface mounting
GANTER
Spring latches GN 722.2 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.
Spring latches GN 722.2 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 29.78 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Stainless Steel-Indexing plungers
GANTER
The indexing plungers GN 613 are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator, GN 817 indexing plungers are to be preferred.
A special screw driver GN 613.1 is available. Two slots are provided in the upper end of the body which are accessible with the knob in its retracted position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 18.78 € Consegna da ： 7 giorni *Prezzo unitario in configurazione base
-
- In Offerta
Stainless Steel-Indexing plungers
GANTER
The indexing plungers GN 617 are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 19.62 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Stainless Steel-Indexing plungers
GANTER
GN 7017 Stainless Steel-Indexing plungers are activated through a lever and are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 8.72 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Stainless Steel-Indexing plungers
GANTER
Stainless Steel-Indexing plungers GN 617.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 30.50 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Stainless Steel-Indexing plungers / Plastic knob
GANTER
Stainless Steel-Indexing plungers GN 817 with rest position (Type C / CK) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 12.32 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Stainless Steel-Indexing plungers with long plastic knob
GANTER
Stainless Steel-Indexing plungers GN 817.2 correspond to GN 817, they only differ by a longer knob.
Type C / CK are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 14.28 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Stainless Steel-Indexing plungers with red knob
GANTER
Stainless Steel-Indexing plungers GN 817 with rest position (Type C / CK) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 12.32 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Stainless Steel-Spring latches for welding
GANTER
Stainless Steel-Spring latches GN 722.1 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.
The square bar allows the latch to be welded in any desired position. To prevent excessive heating up and the resulting change in the spring properties, fixing with welding spots is recommended.
Stainless Steel-Spring latches GN 722.1 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 28.38 € Consegna da ： 12 giorni *Prezzo unitario in configurazione base
-
- In Offerta
Stainless Steel-Spring latches with flange for surface mounting
GANTER
Spring latches GN 722.3 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.
Spring latches GN 722.3 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 31.88 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
| Marchio |
|---|
| Serie prodotto |
| CAD |
| A partire da∗ |
| Consegna da ： |
| Tipo |
| Meccanismo di blocco |
| Metodo di montaggio |
| Lunghezza complessiva |
| Materiale corpo |
| Tutto in acciaio inox |
| Materiale punta |
| Diametro esterno M(mm) |
| Corsa S(mm) |
| Trattamento superficie punta |
| Trattamento termico punta |
| D.E. punta d(Ø) |
| Lunghezza L(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Marchio | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER |
| Serie prodotto | Mini indexing plungers, open indexing mechanism, with red knob | Indexing plungers, Stainless Steel, with knob, with and without rest position | Stainless Steel-Indexing plungers, with lifting ring / with wire loop, without r | Indexing plungers with rest position, Stainless Steel / Plastic knob | Mini indexing plungers, covered indexing mechanism, with red knob | Stainless Steel-Spring latches with flange for surface mounting | |||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| A partire da∗ | 17.32 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 6.38 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 17.90 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 5.52 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 25.90 € *Prezzo unitario in configurazione base Sconto volumi elevati | 17.96 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 4.38 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 14.98 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 11.28 € *Prezzo unitario in configurazione base Sconto volumi elevati | 13.00 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 23.32 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 15.32 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 6.32 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 6.32 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 6.38 € *Prezzo unitario in configurazione base Sconto volumi elevati | 29.78 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 18.78 € *Prezzo unitario in configurazione base Sconto volumi elevati | 19.62 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 8.72 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 30.50 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 12.32 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 14.28 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 12.32 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 28.38 € *Prezzo unitario in configurazione base Sconto volumi elevati | 31.88 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati |
| Consegna da ： | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | 7 giorni | Stesso giorno | Stesso giorno | Stesso giorno | 3 giorni | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | 7 giorni | Stesso giorno | 7 giorni | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | 12 giorni | Stesso giorno |
| Tipo | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Meccanismo di blocco | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Metodo di montaggio | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Lunghezza complessiva | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Materiale corpo | Acciaio inox | Acciaio inox | Acciaio inox | Acciaio inox | Acciaio inox | Acciaio inox | Acciaio inox | Acciaio inox | Acciaio inox | Acciaio inox | Acciaio inox | Acciaio inox | Acciaio inox | Acciaio inox | Acciaio inox | Acciaio inox | Acciaio inox | Acciaio inox | Acciaio inox | Acciaio inox | Acciaio inox | Acciaio inox | Acciaio inox | Acciaio inox | Acciaio inox |
| Tutto in acciaio inox | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Materiale punta | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Diametro esterno M(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Corsa S(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Trattamento superficie punta | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Trattamento termico punta | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| D.E. punta d(Ø) | 4 ～ 12 | 4 ～ 7 | 7 ～ 12 | 3 ～ 10 | - | 6 ～ 12 | 3 ～ 10 | 5 ～ 10 | 5 ～ 10 | 5 ～ 10 | 6 ～ 8 | 6 ～ 8 | 4 ～ 7 | 4 ～ 7 | 4 ～ 7 | 8 ～ 14 | 5 ～ 10 | 5 ～ 10 | 4 ～ 10 | 5 ～ 10 | 4 ～ 16 | 4 ～ 12 | 4 ～ 16 | - | 8 ～ 14 |
| Lunghezza L(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Seleziona per:
Stock
-
- Stock Items Included
Limitare la ricerca specificando Spec./Dim.
-
Meccanismo di blocco
-
Non fornito
-
Blocco puntale
-
Ritorno
-
Non fornito
-
Metodo di montaggio
- Attacco a vite
- Accoppiamento con interferenza
- Montaggio bullone
- Altro
- Flangia
-
Lunghezza complessiva
- Standard
- Tipo corto
-
Materiale corpo
- Acciaio
- Acciaio inox
- Zinco pressofuso
- Altro
-
Tutto in acciaio inox
- Applicabile
- non Conforme
-
Materiale punta
- Acciaio
- Acciaio inox
-
Diametro esterno M(mm)
-
Corsa S(mm)
-
Trattamento superficie punta
-
Trattamento termico punta
-
D.E. punta d(Ø)
-
Lunghezza L(mm)
Limitare la ricerca specificando il produttore
-
- MISUMI (9)
- KIPP (85)
- NORELEM (83)
- GANTER (25)
- HALDER (19)
- NABEYA BI-TECH (10)
- KONISHI MFG (4)
- NABEYA (1)
- ELESA (0)
- TOSHIN CASTER (0)
Limitare la ricerca specificando Tipo dati CAD
-
- 2D
- 3D
Limitare la ricerca specificando Tempi di consegna
-
- Tutti gli articoli
- Stesso giorno
- 2 giorni o meno
- 3 giorni o meno
- 4 giorni o meno
- 5 giorni o meno
- 6 giorni o meno
- 7 giorni o meno
- 8 giorni o meno
- 9 giorni o meno
- 11 giorni o meno
Categorie collegate a Pistoncini
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.