GANTER Morsetti con bloccaggio leva verticale

?* Informazioni su tempi di consegna e prezzi

• 

  Heavy duty vertical acting toggle clamps, with horizontal mounting base, „Longli

  GANTER

  GN 910 heavy duty vertical acting toggle clamps can accommodate an application-specific screw.
  The steel sheet metal design of the clamp and lever arms is replaced by precision casting or die-forged components. The remaining steel sheet parts have been reinforced, and bearing pins and rivets are hardened and ground.
  These vertical clamps are therefore suitable for applications in which substantial forces occur and in which a long service life is required.
  During extensive testing, with trouble free function and under load, the clamp has withstood over one million opening and closing cycles.
  Stepped side washers are included.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	159.78 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Vertical acting toggle clamps with horizontal mounting base

  GANTER

  GN 810 vertical acting toggle clamps work according to the toggle principle: lever and clamping bar move in the same direction. In the clamped position the operating lever is in its vertical position.
  Vertical acting toggle clamps in the U-bar version with two flanged washers (Type A) can accommodate an application specific clamping screw. A spindle assembly with neoprene rubber tip is also included for Type C.
  Type E version can either be utilized by welding the clasp which can then accommodate an application specific hold-down fastener component, or by utilizing the bar in conjunction with the GN 809 Clamp Mounts to hold the work piece in place.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	21.76 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Morsetti di bloccaggio, leva di comando verticale, meccanismo di blocco, attacco verticale

  GANTER

  • Sconto volumi elevati

  A partire da∗ ：	52.68 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Heavy duty vertical acting toggle clamps, with vertical mounting base

  GANTER

  GN 813 heavy duty vertical acting toggle clamps are used for applications where a very high holding force is required, such as closing of foam molds.
  These clamps have been designed for easy dismantling: i.e. the bearing pins are locked with circlips.
  After dismantling the individual parts, they can be modified to suit individual applications.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	223.76 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Heavy duty vertical acting toggle clamps, with vertical mounting base „Longlife“

  GANTER

  GN 910.1 heavy duty vertical acting toggle clamps can accommodate an application-specific screw. The steel sheet design of the clamp and lever arms is replaced by precision or die-forged components. The remaining steel sheet metal parts have been reinforced, bearing pins and rivets are toughened and ground.
  These vertical clamps are therefore suitable for applications in which substantial forces occur and in which a long service life is required.
  During extensive testing, with trouble free function and under load, the clamp has withstood over one million opening and closing cycles.
  Type B - clamping arm with slotted hole (sizes 220 and 440 mm) includes flanged washers.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	159.78 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Stainless Steel-Vertical acting toggle clamps with horizontal mounting base

  GANTER

  GN 810 vertical acting toggle clamps work according to the toggle principle: lever and clamping bar move in the same direction. In the clamped position the operating lever is in its vertical position.
  Vertical acting toggle clamps in the U-bar version with two flanged washers (Type A) can accommodate an application specific clamping screw. A spindle assembly with neoprene rubber tip is also included for Type C.
  

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	48.90 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Stainless Steel-Vertical acting toggle clamps with vertical mounting base

  GANTER

  GN 810.1 vertical acting toggle clamps work according to the toggle principle: lever and clamping bar move in the same direction. In the clamped position the operating lever is in its vertical position.
  Vertical acting toggle clamps in the U-bar version with two flanged washers (Type B) can accommodate an application specific clamping screw. A spindle assembly with neoprene rubber tip is also included
  for Type BC.
  

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	48.66 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Vertical acting toggle clamps with dual flanged mounting base

  GANTER

  GN 812.1 vertical acting toggle clamps work according to the toggle principle: lever and clamping bar move in the same direction. In the clamped position the operating lever is in its vertical position.
  They can be mounted in two planes via the dual flanged mounting base and require less space for the clamping action.
  Vertical acting toggle clamps in the U-bar version with two flanged washers (Type AVF) can accommodate an application specific clamping screw. A spindle assembly with neoprene rubber tip is also included for Type CVF.
  Type EVF version can either be utilized by welding the clasp which can then accommodate an application specific hold-down fastener component, or by utilizing the bar in conjunction with the GN 809 Clamp Mounts to hold the work piece in place.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	43.26 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Vertical acting toggle clamps with dual flanged mounting base

  GANTER

  GN 812 vertical acting toggle clamps work according to the toggle principle: lever and clamping bar move in the same direction. They can be mounted in two planes via the dual flanged mounting base and require less space for the clamping action because the clamping arm and the operating lever move in opposite directions.
  Vertical acting toggle clamps in the U-bar version with two flanged washers (Type AV) can accommodate an application specific clamping screw. A spindle assembly with neoprene rubber tip is also included for Type CV.
  Type EV version can either be utilized by welding the clasp which can then accommodate an application specific hold-down fastener component, or by utilizing the bar in conjunction with the GN 809 Clamp Mounts to hold the work piece in place.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	45.32 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Vertical acting toggle clamps with vertical mounting base

  GANTER

  GN 810.1 Vertical acting toggle clamps work according to the toggle principle: lever and clamping bar move in the same direction. In the clamped position the operating lever is in its vertical position.
  Vertical acting toggle clamps in the U-bar version with two flanged washers (Type B) can accommodate an application specific clamping screw. A spindle assembly with neoprene rubber tip is also included for Type BC.
  Type F version can either be utilized by welding the clasp which can then accommodate an application specific hold-down fastener component, or by utilizing the bar in conjunction with the GN 809 Clamp Mounts to hold the work piece in place.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	21.76 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Morsetti di bloccaggio, leva di comando verticale, meccanismo di blocco, attacco orizzontale

  GANTER

  • Sconto volumi elevati

  A partire da∗ ：	52.68 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Morsetti di bloccaggio in acciaio inox, leva di comando verticale, meccanismo di blocco, wi

  GANTER

  • Sconto volumi elevati

  A partire da∗ ：	93.26 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

Loading...