SMC Regolatori, valvole di sovrapressione

?* Informazioni su tempi di consegna e prezzi

• • Raccomandazione

  

  ARG20(K)~40(K), Regolarore con Pressostato

  SMC

  SMC's ARG20K, 30K, 40K Regulator With Built-In Pressure Gauge With Backflow Function.
  [Features]
  · Improved visibility of the pressure gauge at various mounting locations.
  · Built-in function to reliably exhaust air pressure from the outlet side to the inlet side.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	57.68 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  SRH, regolatore gran purezza

  SMC

  SRH Series Clean Regulator with a pulsation suppression valve design.
  [Features]
  · Contamination-controlled stainless steel regulator.
  · Oil-free parts assembly.
  · Select between a PTFE (grade A) or fluororubber (grade B) diaphragm depending on the application.
  · Designed with an intake/exhaust port in the diaphragm compartment, facilitating flow.
  · Constructed with valve springs partitioned off by the diaphragm.
  · Pulsation-suppressing valve structure.
  · Cleaned, assembled, and inspected in a Class 100 environment and then packaged and sealed in double bags.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	243.10 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Regolatore elettropneumatico serie ITV1000 / 2000 / 3000

  SMC

  Electro-Pneumatic Regulator ITV1000/2000/3000 Series with 2 possible directions of cable entry.
  [Features]
  · Stepless control of air pressure in proportion to an electric signal.
  · Sensitivity: 0.2 kPa (100 kPa specification).
  · Linearity: within ±1% (F.S.)
  · Hysteresis: within 0.5% (F.S.)
  · Protective structure: IP65.
  · 2 possible directions of cable entry.
  · Grease-free specification (ITV1000 Series).

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	375.39 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  ITV00**, regolatore elettropneumatico compatto

  SMC

  ITV0000 Series Compact Electro-Pneumatic Regulator realizes space savings and reduction of weight for manifold use.
  [Features]
  · DIN rail mount design lets you easily add or remove stations.
  · Compact (15 mm) and lightweight (100 g).
  · 2 types of cable connectors are available: straight type and right-angle type.
  · Built-in single-action fitting.
  · With error indication LED.
  · 2 types of brackets are available: flat brackets and L-shaped brackets.
  · IP65 equivalent enclosure protection.
  · Linearity: within ±1% (full span).

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	41.35 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Two-Step Core Pins -Shaft Diameter (P) Designation (0.01mm Increments) / Shaft Diameter Tolerance 0/-0.005 / Tip A·V･E Tolerance ±0.01 Type-

  SMC

  The Power Valve: Regulator Valve VEX1 Series is a large capacity relief type regulator valve.
  [Features]
  · Wide range of sizes available.
  · Connection port size: 1/8 to 2.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	93.16 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  ARJ210, serie regolatore miniaturizzato

  SMC

  SMC Regulator.
  [Features]
  · The body is made of lightweight aluminum (60 g)
  · 2 types of IN side piping connection: male thread and female thread (M5)

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	20.85 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Regolatore -tipo unità singola, serie ARM10

  SMC

  Regulator - Single Unit Type, ARM10 Series; available with a variety of one-touch fitting types and sizes.
  [Features]
  · Select the most appropriate type and size for the given installation conditions.
  · Backflow function equipped as standard.
  · Compatible with units with a digital pressure switch.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	31.60 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  AR*25 / 35, regolatore ad azionamento pilotato

  SMC

  [Caratteristiche] È un regolatore a rilievo con metodo di pilotaggio interno.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	146.40 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  ARP20 / 30 / 40, Regolatore modulare di precisione

  SMC

  Direct-Operated Precision Regulator, Modular Type (With Backflow Function) with sensitivity within 0.2% F.S.
  [Features]
  · Repeatability: Within ±1% F.S. (or within ±3 kPa).
  · Energy saving and air consumption reduced by 80%.
  · Type with the backflow function (ARP20K/30K/40K) can be installed between solenoid valves and cylinders.
  · Specifications with a backflow function feature an inbuilt mechanism for quickly and reliable exhausting the air-pressure at the outlet side.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	57.48 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  IR1200-A~3200-A, Regolatore

  SMC

  IR1200-A/2200-A/3200-A Series high-flow-rate regulator that handles up to about twice the flow rate of conventional products.
  [Features]
  · Air consumption: 0 bleed air.
  · Lightweight type with approximately 27% weight reduction.
  · Repeatability: ±1% (full span).

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	62.98 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Valvola riduttrice di pressione con filtro, Serie IW

  SMC

  [Caratteristiche]
  · Sono disponibili 2 tipi di set di regolazione della pressione, tipo a valvola e tipo fisso.
  · Per l’uso a bassa e alta temperatura, è possibile selezionare parti esterne prive di rame.
  · Direzione di collegamento del Manometro a pressione: 2 direzioni (anteriore, posteriore).

  A partire da∗ ：	61.77 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  AR10-40-A, regolatore modello modulare

  SMC

  SMC Regulator AR10-A to AR40-A.
  [Features]
  · Energy saving regulator.
  · Pressure drop amount: Improved by up to 50%.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	21.11 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  AR20(*)-B to AR60(*)-B, Regolatore y Regolatore con valvola di by-pass

  SMC

  SMC Regulator (With Backflow Function) AR20(K)-B To AR60(K)-B Series.
  [Features]
  · Specifications with a backflow function feature an inbuilt mechanism for quickly exhausting the air-pressure at the outlet side.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	23.81 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  ARG20(K)~40(K), Regolarore con Pressostato

  SMC

  Regulator With Built-In Pressure Gauge ARG20/30/40 allows for one-touch installation and removal of the pressure gauge cover.
  [Features]
  · Improved visibility of the pressure gauge at various mounting locations.
  · The mounting angle of the pressure gauge can be selected according to the piping direction.
  · Pressure gauge anti-rotation mechanism.
  · Panel-cut for pressure gauge not necessary.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	57.68 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  ARX20, regolatore per 2MPa

  SMC

  The ARX20 Series is a piston-type, small-sized regulator for 2.0 MPa.
  [Features]
  · A compact type (face-to-face dimensions: 35 mm / overall length: 80 mm).
  · 3 handy out-ports added convenience.
  · Features a user-friendly handle shape.
  · Ideal for adjusting the discharge pressure on small compressors.
  · Ideal for pressure adjustment as part of air blowing applications.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	17.77 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  ARM5S, Miniregolatore Unità Singola

  SMC

  Regulator - Single Unit Type, ARM5S Series; available with a variety of one-touch fittings.
  [Features]
  · Width: 14 mm.
  · 2 mounting methods are available (direct mounting and DIN rail mounting).
  · Backflow function equipped as standard.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	25.61 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Valvola di controllo della pressione AP100

  SMC

  Pressure Control Valve AP100 discharges pressure to the atmosphere when the pressure exceeds the set value.
  [Features]
  · A pressure control valve that helps maintain a constant pressure within pipes.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	19.23 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Regolatore collettore, tipo mandata comune, serie ARM11A

  SMC

  SMC Manifold Regulator, Common Supply Type, ARM11A Series.
  [Features]
  · Select the most appropriate type and size for the given installation conditions.
  · Available with a variety of one-touch fitting types and sizes.
  · Backflow function equipped as standard.
  · Compatible with units with a digital pressure switch.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	31.27 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Regolatore collettore tipo mandata individuale serie ARM11B

  SMC

  ARM11B Series Individual Supply Type Manifold Regulator compatible with digital pressure switches.
  [Features]
  · Select the most appropriate type and size for the given installation conditions.
  · Types and sizes of the single-action fittings can be changed.
  · Backflow function equipped as standard.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	32.06 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  AMR3000-6000 Series MR Unit (Regulator With Mist Separator)

  SMC

  MR Unit (Regulator with Mist Separator) that integrates a mist separator and regulator.
  [Features]
  · Filtration: 0.3 μm.
  · Helps save on space, and requires less piping.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	203.35 €
  Consegna da ：	26 giorni

  *Prezzo unitario in configurazione base

• 

  SRP1000, regolatore di precisione gran purezza

  SMC

  The SRP Series Precision Clean Regulator is a high-precision, low-flow-consumption stainless steel regulator.
  [Features]
  · Bleed volume of 0.5 L/min (ANR) or less (downstream pressure at 0.2 MPa).
  · Setting sensitivity: 0.3% F.S.
  · Repeatability: 1% F.S.
  [Applications]
  · Pressure feed of chemicals.
  · N2 blow.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	256.77 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  ARJ1020, regolatore miniaturizzato con raccordo istantaneo

  SMC

  The Miniature Regulator ARJ1020F Series is both compact and lightweight (16 g).
  [Features]
  · Low cracking pressure 0.02 MPa.
  · Standard specification equipped with backflow function.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	14.82 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  ARJ310, serie regolatore miniaturizzato

  SMC

  The Miniature Regulator ARJ310 Series is both compact and lightweight (main unit weight: 65 g).
  [Features]
  · Supports shorter mounting pitches.
  · Accommodates 2 types of thread.
  · Built-in one-touch fitting.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	22.37 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  IR1000-A~3000-A, regolatore di precisione

  SMC

  The Precision Regulator IR1000-A/2000-A/3000-A Series boasts a high flow rate of approximately 2 times the previous series (at maximum).
  [Features]
  · Air consumption reduced by up to 90% (approx.)
  · Lightweight type with approximately 27% weight reduction.
  · Sensitivity: 0.2% (full span).
  · Repeatability: ±0.5% (full span).

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	80.35 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  ARM2500 / 3000, modello modulare, regolatore serie manifold

  SMC

  Modular type manifold regulator optimal for central pressure control. Modular Type ARM2500/3000 Series.
  [Features]
  · A modular type that can be freely mounted on a manifold station.
  · Featuring a new knob with a single-action lock system.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	86.44 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Electro-Pneumatic E-P HYREG VY1 Series

  SMC

  The Electro-Pneumatic E-P HYREG VY1 Series is a hybrid regulator combining a regulator and a solenoid valve.
  [Features]
  · Stepless controls via electric signals.
  · Simple circuit configuration.
  · Easy to handle.
  · Manifold capable.
  [Applications]
  · Cylinder thrust control.
  · Drive and thrust control.
  · Flow control of various fluids / Pressure control of tanks / Air flow control for nozzles.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	1,069.24 €
  Consegna da ：	26 giorni

  *Prezzo unitario in configurazione base

• 

  E-P HYREG Manifold Specification

  SMC

  SMC's Manifold Base Manifold Specification VVEX Series.
  [Features]
  · Using the VVEXB/2/4 Series, a manifold with up to 10 stations is possible.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	61.03 €
  Consegna da ：	98 giorni

  *Prezzo unitario in configurazione base

• 

  Two-Step Core Pins -Shaft Diameter (D) Selection / Shaft Diameter Tolerance -0.01_-0.02 / Tip A·V･E Tolerance ±0.015 Type-

  SMC

  A precision regulator from SMC.
  [Features]
  · A high precision, large capacity relief regulator.
  · A poppet-type, 3-port, large exhaust capacity regulator valve with nozzle flapper mechanism. Available as an air-operated or manual handle type.
  · Excellent pressure setting precision. Having a relief capacity equivalent to the supply capacity allows the regulator to respond quickly and set a precise secondary (outlet) pressure, even when the secondary (outlet) volume and the pressure fluctuations are large.
  · High precision.
  · Minimizes pressure fluctuations with its large-volume supply and exhaust capabilities, making it well suited to balancer applications. In addition it features high precision F.S. (full span) sensitivity within 0.2% and F.S. repeatability of within ±0.5%.
  · Manifold capable. VVEXB: 1/8 - up to 10 stations, VVEX2: 1/4 - up to 8 stations
  · Series with large product lineup. Port diameters available from M5 to 2 inches, ensuring that most flow rates and pipes can be accommodated.
  [VEX1A33/VEX1B33]
  · Minimum size.
  · Non-grease specification.
  · Available with sealing materials of NBR or FKM.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	130.44 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Regolatore distributore, tipo mandata comune, Serie ARM11A

  SMC

  Regolatore distributore con dimensioni del raccordo ad azione singola selezionabili.
  [Caratteristiche]
  · Tipo ad alimentazione d’aria centralizzata.
  · È possibile selezionare 2 design di montaggio: montaggio diretto e montaggio su guida DIN.
  · Funzione di riflusso fornita come standard.
  · Stazioni: da 1 a 10.
  · Posizione delle tubazioni di alimentazione (IN) centralizzata: inferiore (1), superiore (2).
  · Con/senza manometro a pressione.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	71.31 €
  Consegna da ：	26 giorni

  *Prezzo unitario in configurazione base

• 

  Regolatore distributore, tipo di mandata individuale, Serie ARM5B

  SMC

  [Caratteristiche]
  Disponibile con una varietà di dimensioni del collegamento a montaggio rapido.
  · 2 tipi di metodi di montaggio disponibili.
  & nbspMontaggio diretto
  & nbspMontaggio su guida DIN
  · Funzione di riflusso fornita come standard.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	42.06 €
  Consegna da ：	26 giorni

  *Prezzo unitario in configurazione base

• 

  ARM1000 / 2000, regolatore serie manifold

  SMC

  Manifold regulator with 4 connection methods.
  [Features]
  · Small size pressure gauge ø15 (diameter 15 mm).
  · Standard models are equipped with a backflow function.
  · Space saving.
  · Fluid: air.
  · Guaranteed pressurance resistance: 1.2 MPa.
  · Maximum operating pressure: 0.8 MPa.
  · Set pressure range (standard): 0.05 to 0.7 MPa.
  · Set pressure range (0.2 MPa setting): 0.05 to 0.2 MPa.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	22.48 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  SRF10 / 30 / 50, Regolatore gran purezza tipo fluororesina con raccordo integrato e prolunghe

  SMC

  Fluororesin type clean regulator.
  [Specifications]
  · Washing parts / body: new PFA.
  · Diaphragm: PTFE.
  · Recommended flow rate: SRF10 2 L/min, SRF30 5 L/min (inlet pressure: 0.3 MPa, fluid: water).
  · RoHS compliant.
  · Integrated fitting / with nut / tube extensions.
  · Pilot port thread types: Rc1/8, NPT1/8.
  · Body sizes: 1, 3.
  · Fitting types: LQ1, LQ2, none.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	463.29 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Regolatore elettropneumatico ad alta pressione Serie ITVH2000 3,0 MPa

  SMC

  Regolatore elettropneumatico ad alta pressione che supporta una pressione di alimentazione massima di 3,0 MPa.
  [Caratteristiche]
  · Conforme a RoHS.
  · Impostare il campo della pressione: da 0,2 a 2,0 MPa.
  · Stabilità: ±1% FS o meno.
  · Consumo di energia: 3 W o meno.
  · Portata massima: 3.000 l/min (ANR).
  · Parti a contatto con i fluidi: grasso al fluoro.
  · Indicatore di pressione digitale.
  · Linearità: ±1% F.S. o meno/Isteresi: 1% F.S. o meno/Ripetibilità: ±1% F.S. o meno.

  A partire da∗ ：	1,658.97 €
  Consegna da ：	26 giorni

  *Prezzo unitario in configurazione base

• 

  ITVX, Regolatore elettropneumatico per alta pressione

  SMC

  High-pressure electro-pneumatic regulator that allows stepless control of air pressure in proportion to an electric signal.
  [Features]
  · Maximum supply pressure: 5.0 MPa.
  · Set pressure range: 0.01 to 3.0 MPa.
  · Maximum flow rate: 3,000 L/min (ANR).
  · Fluid-contact parts: fluorine grease.
  · Power consumption: 3W or less.
  · Digital pressure display.
  · RoHS compliant.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	1,742.48 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  6.0 MPa Regolatore ad azionamento diretto (modello con scarico), VCHR Serie

  SMC

  · Process Industry and PET machine builder's requests for both 2 and 3 port, pilot operated, solenoid valves, with high pressure performance are now answered with the launch of SMC's latest Series VCH range.
  · Designed for use with air or inert gas, these new valves can operate up to a maximum pressure of 5.0 MPa thereby substantially exceeding SMC's existing VXH high pressure series.
  · With large flow passages, and ISO1179-1 conforming port thread sizes of G1/2 to G1, high flow rates are ensured and due to a reduction in the overall volume of the pilot chamber their responsiveness can now only be measured in milliseconds.
  · Additionally, the VCH range offers enclosure protection equivalent to IP65 and a DIN type electrical connector as standard and due to its unique collision-less armature construction, with rubber buffers and urethane diaphragm, early indications have confirmed that the valves operation life time will exceed 10 million cycles.
  · Currently the VCH Series is available in four different valve configurations; 2 port valve normally closed - VCH41, 2 port valve normally open - VCH 42, our 3 port option - VCH410, plus a check valve – VCHC40.

  A partire da∗ ：	1,204.60 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Base manifold per regolatore miniaturizzato ARJ, ARJM10 Serie

  SMC

  · Manifold base for ARJ miniature regulator
  · Accessory/Option
  · Stations: 4, 6, 10

  A partire da∗ ：	19.66 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Supporto di montaggio per SRH3000

  SMC

  · Clean regulator series SRH is a contamination controlled stainless steel regulator designed to minimize residual fluid.
  · Design includes an intake/exhaust port in the diaphragm compartment, which facilitates flow.
  · SRH has outstanding corrosion resistance.
  · All metal parts in contact with fluid use stainless steel SUS316.

  A partire da∗ ：	5.77 €
  Consegna da ：	39 giorni

  *Prezzo unitario in configurazione base

• 

  Regolatore di precisione, IR1000 / 2000 / 3000 Serie

  SMC

  · Precision regulator
  · Regulating pressure range (MPa): 0.005 to 0.8 depending on model
  · Compact and lightweight
  · Bracket & pressure gauge can be mouted on either the front or back
  · 2 air operated models

  A partire da∗ ：	80.35 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Regolatore per acqua, WR110

  SMC

  · Pressure adjustment of water line.
  · Set pressure range: 0,08 to 0,39 MPa / 0,05 to 0,69 MPa.
  · Locking system.

  A partire da∗ ：	36.16 €
  Consegna da ：	39 giorni

  *Prezzo unitario in configurazione base

• 

  Blocco Regolatore, Alimentazione Individuale, ARM5B-R Serie

  SMC

  · Mount pressure gauge (ø14mm).
  · Allow to select one-touch fitting.
  · Adopt backflow function as standard.
  · Regulator Block, Individual Supply Type.

  A partire da∗ ：	38.47 €
  Consegna da ：	39 giorni

  *Prezzo unitario in configurazione base

Loading...