Guide standard

?* Informazioni su tempi di consegna e prezzi

• 

  Lardoni

  MISUMI

  [Caratteristiche] Blocco guida temprato con eccellente resistenza all'abrasione.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  Consegna da ：	9 giorni

• 

  Binari di guida

  FISCHER ELEKTRONIK

  Seleziona per confrontare

  › Configura ora
  Consegna da ：	Preventivo

• 

  Binari di guida snap-in

  FISCHER ELEKTRONIK

  Versione ampia e commutabile

  Seleziona per confrontare

  › Configura ora
  Consegna da ：	Preventivo

• 

  Fastening units, Aluminium

  GANTER

  Fastening units GN 900.1 are fitted to the base of the adjustable slide units GN 900 from the operator’s side.
  
  The mounting is made on the outside ledge of the slide so that the inner slide can still be moved.
  A fastening unit GN 900.1 consists of two mounting rails. Four Stainless Steel-cap screws are inclueded.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	26.54 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Coperture per lardoni

  MISUMI

  [Caratteristiche] Coperchio per un blocco guida. [Materiale] EN 1.1191 Equiv.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  Consegna da ：	9 giorni

• 

  Connecting sets X-Y, Aluminium

  GANTER

  With connecting sets GN 900.2 two adjustable slide units GN 900 can be combined to produce an X-Y axis configuration.
  This combination is achieved with a clamping system which eliminates the use of any kind of fixing holes in the slide.
  The stationary base of the second adjustable slide unit is clamped on to the slide of the first unit to give the X-Y configuration. The slides on both units together give the X-Y movement.
  The small fixing plate serves for the 90° alignment and fine adjustment of the XY-axis configuration.
  All parts required to make up a set are included.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	70.06 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connecting sets X-Z, Aluminium

  GANTER

  With connecting sets GN 900.3 two adjustable slide units GN 900 can be combined to produce an X-Z axis configuration.
  The combination is created by using two connection plates which eliminate any type of fixing holes in the slides. At the same time the adjustable slide unit with the Z-axis can, to a limited extent (vertically to the Z-axis), still be adjusted.
  In the case of a slide configuration of the Z-axis parallel to the reference axis (type P) an adaptor plate (complete with a fastening set, small fixing plates and socket head cap screws) is required which is included in the set.
  The small fixing plates serves for the 90° alignment of the Z-axis and fine adjustment of the adaptor plate (Type P).
  All parts required to make up a set are included.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	83.26 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

Loading...