Guide lineari standard（Fermo：N/A pagina 2）

?* Informazioni su tempi di consegna e prezzi

• 

  Guida LM con sistema a ricircolo di sfere completo, elevata resistenza alle alte temperature in conformità con gli standard internazionali, HSR-M1

  THK

  High temperature specifications that can be used in maximum temperatures of 150°C, and the grease can also be used in high temperature environments. Has low rolling resistance fluctuation in response to changes in temperature and a dimension consistency treatment has been applied, which has provided excellent dimensional consistency.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used from any position.
  · The LM guide for use in high temperatures can be used in even higher temperatures of up to 150°C as a result of using a unique technology for the materials, heat treatment, and lubricant.
  · Can now be used in temperatures of up to 150°C by using stainless steel end rails and end rails that utilize rubber materials for use in high temperatures.
  · A dimensional consistency treatment has been applied to achieve excellent dimensional consistency after applying heat or cooling (may thermally expand under high temperatures).
  · The LM block, LM rail, and balls all use stainless steel with excellent corrosion resistance, which is ideal for use in clean rooms.
  · Uses a grease for use in high temperatures with limited rolling resistance fluctuations resulting from grease even when the temperature fluctuates from a normal temperature to a high temperature.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  Consegna da ：	54 giorni

• 

  Guide profilate / guida larga / carrello largo / materiale selezionabile / HRW

  THK

  A structure with a wide rail width and low center of gravity. HSR It is advantageous when there are Mc moment requirements and is thin compared with.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · Compact heavy load: A high number of effective balls makes it possible to obtain high rigidity in all directions. Has a wide rail width and can adequately withstand moments with a single shaft.
  There is a high rigidity in the horizontal direction and there is no need to for reinforcement such as horizontal pressing due to large secondary moments being incurred on the rail cross-section.
  · The self-aligning capability achieved from the unique circular arched-groove front face combination (DF set) makes it possible to absorb the mounting error even when there is a preload incurred, and it is also capable of obtaining a smooth linear motion at a high accuracy.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  Consegna da ：	14 giorni

• 

  * Sistema a ricircolo di sfere completo conforme ai nuovi standard [3 / 5 giorni di spedizione] con guida LM conforme agli standard mondiali, modello HSR

  THK

  A best selling THK product. The HSR series can be used in any position.
  *When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
  (Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
  Please place your orders in this manner.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  Consegna da ：	7 giorni

• 

  Carrello / carrello largo, dimensioni del carrello selezionabili / materiale selezionabile / cuscinetto a ricircolo di sfere / HRW

  THK

  An individual block from the THK LM guide HRW series. Extremely useful for sudden design changes and when performing maintenance.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	104.99 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Serie C-Lube Linear Way L ML (F)

  IKO

  Questa semplice struttura a due file e quattro punti di contatto e l'esclusiva tecnologia di dimensionamento hanno portato alla creazione di questa guida lineare di dimensioni ultra ridotte.
  
  [Caratteristiche]
  · Se siete alla ricerca di una struttura semplice, provate questo formato ultra compatto (la misura più piccola LWL1 ha una larghezza di appena 1 mm).
  · Ampia varietà per rispondere alle esigenze
  · Un tipo di fissaggio delle sfere facile da montare
  · Realizzato in acciaio inox altamente resistente alla corrosione
  · Compatibile con un'ampia varietà di applicazioni in ambienti speciali
  

  Seleziona per confrontare

  Configura ora
  Consegna da ：	10 giorni

• 

  Serie C-Lube Linear Way ME

  IKO

  Obiettivo: compattezza su tutti i fronti. Un dispositivo di guida per movimenti lineari di tipo universale con un'elevata versatilità.
  
  [Caratteristiche]
  · Una serie universale, compatta e con un'elevata versatilità
  · Ampia varietà per rispondere alle esigenze
  · Una linea di acciaio inossidabile con un'eccellente resistenza alla corrosione
  · Una serie lineare E a bassa rumorosità che consente di lavorare in modo fluido e silenzioso
  

  Seleziona per confrontare

  Configura ora
  Consegna da ：	10 giorni

• 

  Guide profilate / EGS

  OZAK

  [Features]
  · Comes standard equipped with a side seal to improve the dust-proofing performance. You can expect longer life expectancy out of this product due its ability to even further prevent foreign object infiltration.
  · Can achieve weight reduction for the rail by revising the height and cross-section shape.
  · The lubricant performance has been improved beyond that of conventional products by revising the grease supply path and using a design that allows grease to accumulate in the ball circulation path.
  · Equipped with complete compatibility for fitting the bearing with the rail. Can achieve reduced assembly times.
  · No need to fret because the balls included in the bearings have a structure that will not allow them to fall out.
  · We have standardized the rail length in order to be able to support all rail lengths and to have a symmetrical mount hole pitch location.
  · Can achieve simplified maintenance by adding an oil hole to both sides of the bearing carriage. We recommend regularly replenishing the grease.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  Consegna da ：	17 giorni

• 

  Guide profilate / carrello corto / EGS-S

  OZAK

  [Features]
  · Comes standard equipped with a side seal to improve the dust-proofing performance. You can expect longer life expectancy out of this product due its ability to even further prevent foreign object infiltration.
  · Can achieve weight reduction for the rail by revising the height and cross-section shape.
  · The lubricant performance has been improved beyond that of conventional products by revising the grease supply path and using a design that allows grease to accumulate in the ball circulation path.
  · Equipped with complete compatibility for fitting the bearing with the rail. Can achieve reduced assembly times.
  · No need to fret because the balls included in the bearings have a structure that will not allow them to fall out.
  · We have standardized the rail length in order to be able to support all rail lengths and to have a symmetrical mount hole pitch location.
  · Can achieve simplified maintenance by adding an oil hole to both sides of the bearing carriage. We recommend regularly replenishing the grease.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  Consegna da ：	16 giorni

• 

  Guide profilate / carrello alto / EGH, EGH-L

  OZAK

  [Features]
  · Comes standard equipped with a side seal to improve the dust-proofing performance. You can expect longer life expectancy out of this product due its ability to even further prevent foreign object infiltration.
  · Can achieve weight reduction for the rail by revising the height and cross-section shape.
  · The lubricant performance has been improved beyond that of conventional products by revising the grease supply path and using a design that allows grease to accumulate in the ball circulation path.
  · Equipped with complete compatibility for fitting the bearing with the rail. Can achieve reduced assembly times.
  · No need to fret because the balls included in the bearings have a structure that will not allow them to fall out.
  · We have standardized the rail length in order to be able to support all rail lengths and to have a symmetrical mount hole pitch location.
  · Can achieve simplified maintenance by adding an oil hole to both sides of the bearing carriage. We recommend regularly replenishing the grease.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  Consegna da ：	16 giorni

• 

  Guide profilate / carrello largo / EGH-F, EGH-FL

  OZAK

  [Features]
  · Comes standard equipped with a side seal to improve the dust-proofing performance. You can expect longer life expectancy out of this product due its ability to even further prevent foreign object infiltration.
  · Can achieve weight reduction for the rail by revising the height and cross-section shape.
  · The lubricant performance has been improved beyond that of conventional products by revising the grease supply path and using a design that allows grease to accumulate in the ball circulation path.
  · Equipped with complete compatibility for fitting the bearing with the rail. Can achieve reduced assembly times.
  · No need to fret because the balls included in the bearings have a structure that will not allow them to fall out.
  · We have standardized the rail length in order to be able to support all rail lengths and to have a symmetrical mount hole pitch location.
  · Can achieve simplified maintenance by adding an oil hole to both sides of the bearing carriage. We recommend regularly replenishing the grease.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  Consegna da ：	16 giorni

• 

  Guida LM a sfera piena, tipo radiale, tipo SR

  THK

  [Caratteristiche]
  ·Un tipo compatto con altezza ridotta della sezione trasversale, ideale per guide orizzontali grazie alla struttura di contatto a sfera resistente ai carichi in direzione radiale
  ·Poiché si tratta di un tipo di regolazione automatico in grado di assorbire ragionevolmente il parallelismo dei 2 assi e l’errore di precisione del livello, è possibile ottenere un’elevata precisione e movimenti lisci
  ·La parte di ritorno di ciascuna fila di sfere è progettata in modo tale che le sfere dei cuscinetti circolino uniformemente dalla parte guida della piastra terminale, in modo da ottenere un movimento rotatorio con un leggero rumore
  ·Anche rispetto al pre-carico e al carico eccentrico, lo scorrimento differenziale della sfera è ridotto, ha un’eccellente resistenza all’abrasione ed è possibile mantenere la precisione per un lungo periodo di tempo
  ·I blocchi LM, le rotaie LM e le sfere dei cuscinetti possono essere maneggiati con acciaio inox
  ·Anche se il blocco LM viene estratto dalla rotaia LM, la sfera è trattenuta dal piatto di supporto e non cadrà

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  Consegna da ：	7 giorni

• 

  Pattino a sfere / acciaio / FKS / R1665

  BOSCH REXROTH

  • Sconto volumi elevati

  Dati CAD disponibili in formato 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	67.15 €
  Consegna da ：	70 giorni

  *Prezzo unitario in configurazione base

Loading...