Pulegge per cinghie trapezoidali

?* Informazioni su tempi di consegna e prezzi

• 

  Puleggia Poly Drive Isomec

  NABEYA BI-TECH

  Excellent transmission efficiency. High-speed / high-power transmission. Lightweight and compact transmission system.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	75.99 €
  Consegna da ：	9 giorni

  *Prezzo unitario in configurazione base

• 

  Puleggia Isomec SP

  NABEYA BI-TECH

  V pulley to international standards. Either general purpose V-belt, or narrow width V-belt can be used.
  
  [Features]
  · Consistent production from casting to machining and surface treatment.
  · The cell production method allows the production of many kinds of products in low volume, with short lead times.
  · Can be attached and removed from shaft / positioned with hex or socket wrench. In addition, due to the taper fit tightening effect, tightening force is equivalent to shrink fit. Safe and reliable transmission is achieved.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	42.00 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Puleggia standard V

  NABEYA BI-TECH

  Imbalance mass allowance on the outer circumference is 0.2% or 3 g if larger, of the pulley mass.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	11.02 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Pulegge trapezoidali per montaggio con bussole coniche di serraggio (22070)

  NORELEM

  · Sistema flessibile di boccole di serraggio rastremate
  
  · Utilizzabile con o senza linguetta di aggiustamento
  
  · Facilità di montaggio e smontaggio
  
  · Funzionamento silenzioso ed eccellenti capacità di smorzamento.

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	5.91 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  NS V pulegge standard A

  KANEMITSU

  Nominal diameter 2 to 24 inches, with 1 to 4 runners available in wide selection, with dimensional precision to JIS reference standards, and good balance measurements, and directly usable high speed rotator.
  
  [Features]
  · A wide range of model configurations: 95 A type, 132 B types and 102 C types, with pitches ranging from 2° to 30° and 1 to 6 grooves.
  · High-performance, high-quality NS pulley is the safest and easiest to handle, due to uniform material and strong wall thickness.
  · Dimensional precision to JIS reference standards, with thorough quality control.
  · Groove part shape and dimensions table.
  · Maximum speed: NS standard V-pulley is recommended to be of circumferential speed under 25 m/s specification.
  · Recommended minimum pulley diameter: A type 3° or greater, B type 5° or greater, and C type 8° or greater.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	9.94 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Pulegge B standard NS V

  KANEMITSU

  Nominal diameter 2 to 30 inches, with 1 to 5 runners available in wide selection, with dimensional precision to JIS reference standards, and good balance measurements, and directly usable high speed rotation.
  
  [Features]
  · Extensive range of applications, with high level of model configuration, and safety for quality to satisfy user needs.
  · The NS pulley is the safest and easiest to handle, due to uniform material and strong wall thickness.
  · Dimensional precision to JIS reference standards, with thorough quality control.

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	6.19 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  STB Pulegge 3V

  KANEMITSU

  Good balance is a benefit of this narrow width V belt pulley with bushing set, requiring no shaft hole, or key machining. Pulley replacement is easy. Shaft hole diameters standardized to both new JIIS / previous JIS. Material exceeds FC200

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	34.34 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Calibro per gole VMG per pulegge per cinghie trapezoidali

  NABEYA BI-TECH

  Gauge for checking wear of pulley V-groove part. Orders can be made for individual shapes, or as a set for each groove shape. A gap has been provided between the gauge and the outer circumference of the pulley and the bottom of the V-groove. Early replacement is recommended for transmission efficiency.

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	82.01 €
  Consegna da ：	9 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Puleggia Vankin VK

  NABEYA BI-TECH

  [Features]
  · Owing to the rotation molding method, the pulley is given a rigidity which can be applied to light / moderate load transmission in general industrial machinery.
  · The pulley grooves are rounded, and with is no sharp corners will not damage the belt.
  · Because of its light weight, the entire machine including the base / pillow block etc can be made lighter and more compact.
  · Material finish: disk: SPCC, electrodeposition coating (NBK dark blue), hub: FC200, electrodeposition coating (NBK dark blue), bolt: 10B22M.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	14.61 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Puleggia JIS V

  NABEYA BI-TECH

  Highest quality pulley, with materials together with machining and balance accuracy exceeding JIS standards.
  
  [Features]
  · Consistent production from casting to machining and surface treatment.
  · The cell production method allows the production of many kinds of products in low volume, with short lead times.
  · Shaft hole, keyway, and set screw machining standardized.
  · Easy set-up
  · A: 146 size, B: 218 size, C: 212 size, D: 74 size.
  · 369 size has been added into JIS standard 281 size separately
  · Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
  · Top quality pulley with materials, machining and balance accuracy exceeding JIS standards (JISB1854-1987 "General use V-pulley")
  · Imbalance tolerance on the outer circumference is 0.1% of the pulley mass.
  · Surface treatment, for improving corrosion resistance is a electrodeposition coating with beautiful finish.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	14.92 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Puleggia con velocità variabile

  NABEYA BI-TECH

  Fine rotation ratio adjustment. Simple structure, precision machining. No rattling due to micro vibrations / shock loads.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	74.34 €
  Consegna da ：	9 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  SNS JIS pulegge a V A

  KANEMITSU

  Nominal diameter ø67 to 710, with 1 to 3 runners available in wide selection, good balance measurements, and directly usable on high speed rotator.
  
  [Features]
  · SNS JIS V pulley is a new addition to the mechanical series, with 360 types standardized, rotation ratio, distance between shafts etc. can be freely selected.
  · Ingenuity has been applied to the shape design etc. to prevent damage to the shaft or bearing.
  · Shaft etc. can be preserved, useful for saving labor.
  · Can also be used for machines with heavy loads and shocks etc.
  · High-precision machining, for good transmission efficiency, and regular rotation ration is achieved.
  · As the SNS and JIS V-pulleys, on all balancing machine products, machine using aligned balance measurements, they have good quality high-precision and are directly usable on high-speed rotators.

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	15.97 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Pulegge per boccola di serraggio conica - Profilo SPB

  CONCAR

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	23.63 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Pulegge di rinvio V in tecnopolimero (VIP)

  IMAO CORPORATION

  [Features]
  · Adaptive V-belt M type, A type, B type resin pulley idler.
  · Integrated ball bearing

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	15.67 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Puleggia cuneo

  NABEYA BI-TECH

  Allows high speed / high power transmission. Large rotation ratio obtainable, that can substitute speed reduction gear.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	16.74 €
  Consegna da ：	8 giorni

  *Prezzo unitario in configurazione base

• 

  SNS Power Sheaves (3V)

  KANEMITSU

  JIS B1855 narrow width V-pulley dimensions adopted. Nominal diameters ø67 to 630, groove no. 1 to 6. Intermediate sizing also standardized. Wide selection, for easy design. Material exceeds FC200 (greater transmission capacity FC250)

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	21.68 €
  Consegna da ：	8 giorni

  *Prezzo unitario in configurazione base

• 

  Pulegge dentate per trasmissione a cinghia per boccola di serraggio conica - Profilo 12 x PL

  CONCAR

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	209.05 €
  Consegna da ：	17 giorni

  *Prezzo unitario in configurazione base

• 

  Pulegge dentate per trasmissione a cinghia per boccola di serraggio conica - Profilo 16 x PJ

  CONCAR

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	90.89 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Trasmissione a variazione continua (Modello Hagino) W / L

  NABEYA BI-TECH

  [Features]
  · Rotation has continuously variable speed.
  · In the hagino type CVT, by placing a speed change pulley on the intermediate shaft and changing the position thereof, the rotational speed of the pulley on the driven side is changed utilizing the tension balance of the belt, allowing continuously variable transmission.
  · Alignment is automatically adjusted.
  · Both side disks and middle disks move freely on the shaft.
  · Alignment with the driving side pulley and the driven side pulley is automatically adjusted.
  · For this reason, the center of the belt is always held, and the belt is not strained.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	219.70 €
  Consegna da ：	9 giorni

  *Prezzo unitario in configurazione base

• 

  Boccola Isomec / Adattatore

  NABEYA BI-TECH

  ISOMEC bushing can be used simply by machining a straight hole into the rotating body.

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	50.31 €
  Consegna da ：	9 giorni

  *Prezzo unitario in configurazione base

• 

  Boccola Isomec / Mozzo con bullone

  NABEYA BI-TECH

  ISOMEC bushing can be used simply by connecting a bolt to the rotating body.

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	68.69 €
  Consegna da ：	9 giorni

  *Prezzo unitario in configurazione base

• 

  Boccole Isomec

  NABEYA BI-TECH

  Safe and reliable fastening system. Responding to a design change is easy.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	21.99 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  NS V Puleggia Standard C

  KANEMITSU

  Nominal diameter 4 to 30 inches, with 2 to 6 runners available in wide selection, with dimensional precision to JIS reference standards, and good balance measurements, and directly usable on high-speed rotator.

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	369.12 €
  Consegna da ：	9 giorni

  *Prezzo unitario in configurazione base

• 

  Pulegge B JIS V SNS

  KANEMITSU

  Nominal diameter ø118 to 900, with 1 to 5 runners available in wide selection, good balance measurements, and directly usable on high-speed rotator.

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	40.18 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  SNS Power Sheaves (5V)

  KANEMITSU

  JIS B1855 narrow width V-pulley dimensions adopted. Nominal diameters ø150 to 1000, groove no. 2 to 10. Intermediate sizing also standardized. Wide selection, for easy design. Material exceeds FC200 (large transmission capacity FC250)
  
  [Features]
  · JIS standard sizes in addition to a wide range of intermediate sizing standardized, with free selection of rotation ratio and shaft distance etc., for easy design.
  · JIS B 1855 slim V-pulley dimensions adopted for interchangeability.
  · Material exceeding FC200 (large transmission capacity FC250) used, with various dimensions displaying 100% performance for high precision, vibration, and balance.
  · Compared with previous products (A.B.C.....shape), narrow width V belt (3W, 5V, 8V types), there are many advantages due to the very large transmission capacity of the belt, with high horsepower greatly reducing costs.
  · Due to the compactness of the pulley, it can be used for low speed horsepower not possible due to large sizes with conventional products, and it is now possible to change the chain and gear transmission.
  · Power sheave has enough strength to withstand.
  · Since release, it has been used by many, so can be adopted with confidence.
  · Band-power ACE, and power scrum are interchangeable even when used with groove guide wheels, and max wedge belt.

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	107.58 €
  Consegna da ：	8 giorni

  *Prezzo unitario in configurazione base

• 

  STB Pulegge 5V

  KANEMITSU

  Good balance is a benefit of this narrow width V belt pulley with bushing set, requiring no shaft hole, or key machining. Pulley replacement is easy. Shaft hole diameters standardized to both new JIIS / previous JIS. Material exceeds FC200

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	484.41 €
  Consegna da ：	8 giorni

  *Prezzo unitario in configurazione base

• 

  Pulegge per boccola di serraggio conica - Profilo SPA

  CONCAR

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	12.08 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Pulegge per boccola di serraggio conica - Profilo SPC

  CONCAR

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	135.60 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Pulegge per boccola di serraggio conica - Profilo SPZ

  CONCAR

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	11.38 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Pulegge dentate per trasmissione a cinghia per boccola di serraggio conica - Profilo 12 x PJ

  CONCAR

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	67.69 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Pulegge dentate per trasmissione a cinghia per boccola di serraggio conica - Profilo 16 x PL

  CONCAR

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	568.98 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Pulegge dentate per trasmissione a cinghia per boccola di serraggio conica - Profilo 8 x PJ

  CONCAR

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	85.45 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Pulegge dentate per trasmissione a cinghia per boccola di serraggio conica - Profilo 8 x PL

  CONCAR

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	105.43 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Pulegge cinghia a V, snodi

  OPTIBELT

  Seleziona per confrontare

  Configura ora
  Consegna da ：	4 giorni

Loading...