Piedi di livellamento（Proprietà：Resistenza alla corrosione）

?* Informazioni su tempi di consegna e prezzi

• • In Offerta fino al 31/12/2024

  

  Piedino di livellamento (Carichi pesanti / Modello per carichi Extra pesanti) FPMS

  NABEYA BI-TECH

  Heavy load / super heavy load type leveling foot. The screw is stainless steel and features excellent corrosion resistance.
  
  [Features]
  · Can be used as a light load idler for wires.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	29.65 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  Piedino di livellamento FDMS / FDFS

  NABEYA BI-TECH

  [Features]
  · The screw and pad are made of stainless steel.
  · Excellent corrosion resistance.
  · FDMS: male thread and FDFS: female thread.
  · The pad can be tilted up to 15°.
  · Effective for use on slopes.
  · There are products that include a Delrin* cap (FDM-KS/FDFS-Ks) and products that include a Santoprene** cap (FDMS-KR/FDSF-KR).
  · Material and finish: Screw/pad: SUS303.
  · Lock nut SUS304

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	22.16 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  Regolatori per superfici inclinate per fissaggio tramite ancoraggio D-U-EII

  DAIWARASHI

  An anchor fixing type adjuster for slopes in which the screw shaft part tilts even more. Note: Please be advised that the model number in VONA has been changed from "D-U-E II" to "D-U-E2."
  
  [Features]
  · The receiver part has a larger hole than the D-A type in order to enable it to receive the spherical structure of the upper part.
  · The spherical structure is divided into a sphere and a receiver.
  · The receiver has undergone spherical processing to enable the sphere to moves smoothly.
  · M12/M16/M20 bolts can be used.
  · The angle 35° is when using an M12 bolt, and when using M16/M20, since the hexagonal part contacts the spherical portion, it is limited to about 15°

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	28.14 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  Regolatore standard Modello per recipiente D-A / D-B

  DAIWARASHI

  The most general standard type adjuster
  
  [Features]
  · The screw shaft rotates and tilts somewhat.
  · A standard type that can be used as the adjustment bolt for any machinery.
  · The affordable standard receiver type is recommended when using in large numbers, such as for the legs of a conveyor.
  · D-A supports screw diameters M16 and M20, and D-B supports screw diameter M12.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	8.54 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  Regolatore per carichi pesanti (Modello per recipiente ampio) D-CIII / D-CIII, S / D-CIII-W

  DAIWARASHI

  A wide base type adjuster for heavy weights that is stable and that can distribute the load to the floor. Note: Please be advised that the model number in VONA has been changed from "D-C III" to "D-C3."
  
  [Features]
  · The receiver of the stainless steel D-C III is a forged item.
  · D-C III S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	41.31 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  Regolatore per carico pesante (Modello a vite lunga) D-C-L / D-C-L S

  DAIWARASHI

  A long screw adjuster with a wide adjustment range
  
  [Features]
  · Although the dimensions in the table are in increments of 50 mm, dimensions can be cut as desired upon request.
  A limited quantity of 500 mm total length products are available for M16 and M20.
  · D-C-LS has a luxurious feel since the surface of the receiver is grind-processed with a lathe.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	33.35 €
  	Prezzo speciale
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  adattatore acciaio inoxr (KC-1275-A)

  TAKIGEN

  Stainless steel with superior corrosion resistance. For heavy loads.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	7.91 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  piedini di livellamento in inox (K-1276-A)

  TAKIGEN

  Stainless steel with superior corrosion resistance.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	33.36 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  adattatore livello KC-275-B

  TAKIGEN

  For heavy loads. A thrust bearing is inserted between the receiver and bolt to facilitate bolt rotation.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	7.32 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  piede di livellamento inox per carichi pesanti K-1277-B

  TAKIGEN

  Stainless steel with superior corrosion resistance.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	132.08 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Piede di livellamento (KA)

  IMAO CORPORATION

  [Caratteristiche] Il tipo in acciaio inox ha un'eccellente resistenza alla corrosione e all'acqua. Carico approvato: 3 kN, 5 kN.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	8.22 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Piede di livellamento (Con ancoraggio a terra) (KAF)

  IMAO CORPORATION

  [Caratteristiche] Il tipo in acciaio inox ha un'eccellente resistenza alla corrosione e all'acqua. Carico approvato: 5 kN.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	19.75 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  Regolatori per fissaggio ad ancoraggio D-EII / D-EII-ST

  DAIWARASHI

  A standard item adjuster bolt for anchor fixing. Note: Please be advised that the model number in VONA has been changed from "D-E II" to "D-E2."
  
  [Features]
  · Similar to D-A, it is structured so that fixing of the receiver and bolt is performed by placing the bolt protrusion into the receiver and pressing a nut into it.
  · Can easily be fixed using an anchor bolt.
  · Please use an anchor bolt.
  · Please use a 12 mm anchor bolt.
  · Bolts shorter than 12 × 70 are not recommended for complete fixing due to safety concerns.
  · Note: The screw rotates and tilts somewhat.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	17.43 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  Sistema di prevenzione al movimento con regolatori attraverso vite per fissaggio tramite ancoraggio D-J-EII

  DAIWARASHI

  An adjuster for anchor fixing in which the horizontal shaking of the screw shaft part is completely locked. Note: Please be advised that the model number in VONA has been changed from "D-J-E II" to "D-J-E2."
  
  [Features]
  · The structure is such that some space exists between the receiver and bolt.
  · This is the result of our efforts to enable bolts to move smoothly even if the floor surface is somewhat tilted.
  · It has been pointed out in the past that this may cause bolt looseness to occur when the upper portion of a conveyor vibrates, possibly resulting in significant machinery movement caused by shaking when the conveyor stops.
  · It is for this reason that we came up with the D-J type, which is suitable for use when the top portion of machinery such as a conveyor vibrates and moves slightly.
  · Even when a running machine is stopped, the bolts will not move and falling over will not occur.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	33.18 €
  	Prezzo speciale
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  Piedini di livellamento con movimento a vite e anti-inversione modello D-J-A

  DAIWARASHI

  A standard receiver type adjuster in which the horizontal shaking of the screw shaft part is completely locked.
  
  [Features]
  · The structure is such that some space exists between the receiver and bolt.
  · This is the result of our efforts to enable bolts to move smoothly even if the floor surface is somewhat tilted.
  · It has been pointed out in the past that this may cause bolt looseness to occur when the upper portion of a conveyor vibrates, possibly resulting in significant machinery movement caused by shaking when the conveyor stops.
  · It is for this reason that we came up with the D-J type, which is suitable for use when the top portion of machinery such as a conveyor vibrates and moves slightly.
  · Even when a running machine is stopped, the bolts will not move and falling over will not occur.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	14.95 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  Regolatore con Base in gomma per leggero smorzamento delle vibrazioni D-AIII / D-AIII &R / D-AIII &SI / D-BIII / D-BIII &FR / D-BIII & SI

  DAIWARASHI

  An adjuster for light vibration-proofing equipped with rubber on the back side of the adjuster base. Note: Please be advised that the model number in VONA has been changed from "D-A III" to "D-A3."
  
  [Features]
  · Since the rubber part comes in contact with the floor, floor damage is prevented.
  · A light vibration-proof type adjustment bolt.
  · However, since the rubber hardness is 80°, repulsion is higher than low elasticity rubber and does not demonstrate much of a vibration-proofing effect. For this reason, please compare with other vibration-proof types such as the D-G series when using.
  · Can easily be mounted using a screwdriver since a Phillips head slot has been provided on the bottom of the bolt.
  · A nylon washer is used between the receiver and bolt, and rotation is smooth.
  · The FR type uses non-migratory rubber so traces of rubber do not remain when moving the machinery.
  · The SI type is white and is characterized by hardly leaving traces of rubber.
  · Suitable for office equipment, etc.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	10.07 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  Regolatore - Recipiente in plastica D-G / D-GII

  DAIWARASHI

  An adjuster with a rubber-made base that is also optimal for slip prevention. Note: Please be advised that the model number in VONA has been changed from "D-G II" to "D-G2."
  
  [Features]
  · A rubber cover is used for the entire receiver, and an iron core is included inside.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	35.85 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  Regolatore per carichi pesanti D-C / D-C, S

  DAIWARASHI

  A standard type adjuster for heavy loads
  
  [Features]
  · The receiver is a forged item.
  · Since it is a mold release surface that has undergone hot forging, unevenness does not stand out, unlike mold casting.
  · D-C-S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.
  · Since the receiver is forged, it features a load resistance of 10 tons or more. However, since the screw is buckled first, load resistance depends on the screw diameter.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	19.14 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  Regolatori per carichi pesanti con gomma D-C-R

  DAIWARASHI

  A rubber equipped type adjuster for medium loads
  
  [Features]
  · Receiver features a chloroprene rubber coating.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	21.00 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  Regolatore per carichi pesanti (Accoppiamento con cuscinetto) D-H

  DAIWARASHI

  An adjuster for heavy weights with a built-in thrust bearing
  
  [Features]
  · Suitable for the adjustment of heavy machinery.
  · Stability is outstanding since a large diameter bolt is used.
  · Smooth adjustments can be made even for non-heavy machinery.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	86.24 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  Regolatori per carichi pesanti con gomma (Accoppiamento con cuscinetto) WD-C-R

  DAIWARASHI

  A rubber type adjuster for medium loads with a thrust bearing that enables smooth leveling
  
  [Features]
  · Receiver features a chloroprene rubber coating.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	49.08 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  Regolatore per carichi pesanti con plastica D-AII / D-BII

  DAIWARASHI

  A wide base type adjuster for medium loads with rubber. Note: Please be advised that the model number in VONA has been changed from "D-C III" to "D-C3."
  
  [Features]
  · The receiver features a chloroprene rubber coating and the rear side of the rubber has undergone groove processing to make it resistant to slipping.
  · Has a larger outer diameter than D-C-R and feels more stable and heavy.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	37.47 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Regolatore standard per recipiente in plastica D-AII / D-BII

  DAIWARASHI

  A standard type adjuster with plastic that does not damage the floor. Note: Please be advised that the model number in VONA has been changed from "D-A II" to "D-A2."
  
  [Features]
  · Does not stain or damage floors since a special plastic is molded into the receiver.
  · The plastic part has elasticity, feels good to touch, and features excellent aging resistance and temperature resistance.
  · Suitable for any machinery or office equipment since the external appearance also features a beautiful finish.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	15.78 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  Regolatore recipiente standard a diametro piccolo D-F / D-F-C

  DAIWARASHI

  An adjuster whose screw and base have small diameters
  
  [Features]
  · Similar to the D-A and D-B types, it is structured so that a nut is pressed into the bolt protrusion inside the receiver, eliminating worries regarding the receiver falling off.
  · Manufactured to enable some play between the screw part and receiver, enabling its use on surfaces with a slight slope.
  · A light load type with a receiver diameter that is also small.
  · Thanks to the plastic coating on the outer circumference of the receiver, floors are not stained or damaged.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	5.60 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  Regolatore per Pareti D-DI

  DAIWARASHI

  A base cut type adjuster that does not protrude from the upper part and that prevents interference with other parts. Note: Please be advised that the model number in VONA has been changed from "D-D I" to "D-D1."
  
  [Features]
  · A special adjuster for walls.
  · Please use together with D-D II.
  · Please use accessories such as hex nuts, etc.
  · The portion that makes contact with the wall is folded.
  · As a result, the structure features a load resistance that is dramatically higher than products from other manufacturers in which the receiver is cut.
  · In terms of its relation to the wall surface, the bolt hole has undergone special machining different from that of normal catch plates.
  · Please refer to the drawings for use.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	24.51 €
  	Prezzo speciale
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  adattatore acciaio inoxr (KC-1275-B)

  TAKIGEN

  Stainless steel with superior corrosion resistance. For heavy loads.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	26.39 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  adattatore acciaio inoxr (KC-1280)

  TAKIGEN

  A flame-retardant material is used for the rubber on the bottom part. The rubber on the bottom part is non-migratory.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	11.08 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  adattatore gamba acciaio inox (K-1794)

  TAKIGEN

  Outstanding durability

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	11.55 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  piedino in inox (K-150)

  TAKIGEN

  [Caratteristiche] Takigen Seizo Adjuster Staffa in acciaio inox K-1250.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	42.17 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  adattatore livello inox (KC-1275-D)

  TAKIGEN

  Since the area of the bottom part that comes in contact with the ground is larger than that of general level adjusters, it is stable even when placed on soft surfaces such as on soil.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	4.04 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  piede di livellamento inox K-1277-A

  TAKIGEN

  Stainless steel with superior corrosion resistance.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	23.75 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  piede di livellamento inox per carichi pesanti K-1276-B

  TAKIGEN

  Stainless steel with superior corrosion resistance.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	125.77 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• • In Offerta fino al 31/12/2024

  

  Piede livellatore (500 / 600 kg) (Con piastra di arresto)

  TRUSCO NAKAYAMA

  · Features an anchor hole for fixing to the floor.
  · A hole is provided to the pedestal part and to enable it to be fixed to the floor with an anchor. Used to prevent equipment movement caused by intense vibrations.
  · Machine tools, vending machines, conveyors, work benches, control panels, and scientific instruments.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	20.97 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

Loading...