Type Code Seach | *NOT READY*: #CODE

Suggerimento keywords

Suggerimenti codice prodotto

Prodotti fuori produzione

GANTER Pistoncini

Limitare la ricerca specificando Tipo

Manopola standard
Con leva
Con anello
Componenti annessi
Senza manopola
Manopole speciali

Numero di dati da visualizzare: 30; 45; 60

Ordina per:

?* Informazioni su tempi di consegna e prezzi

Indexing plungers, Steel / Plastic-knob

GANTER

Indexing plungers GN 817 with rest position (Type C / CK) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	7.34 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Spring bolts, Stainless Steel / Plastic knob

GANTER

The plunger of the Stainless Steel-Spring bolts GN 313 does not protrude in the inoperative position.
It can be operated manually or in Type D and DK mechanically (pneumatic cylinder, cam plate, etc.) when it will protrude only as long as it is operated.
Using the internal thread at identification 2 on the pressure side, special pressure bolts or a rod arrangement can be operated, for instance.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	12.86 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Cam action indexing plungers with flange

GANTER

Cam action indexing plungers GN 612.9 are used in cases where the plunger must not protrude all the time. By rotating the lever through 180° the plunger withdraws itself. The notch allows safe positioning.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	8.98 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Clamping knobs with indexing plunger

GANTER

Clamping knobs with indexing plunger GN 7336.7 are used for positioning, securing and clamping adjusting elements at the same time.
The axial movement of the handle (pulling) pulls the indexing pin from the engaged position against the spring force, with the star know at the same time remaining connected with form-lock to the clamping screw via a hexagonal element, allowing both clamping and releasing.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	8.00 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Indexing plungers with rest position, Steel / Plastic knob

GANTER

Indexing plungers GN 617.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted.
A notch keeps the plunger in this position.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	9.98 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Indexing plungers, Stainless Steel / Plastic knob

GANTER

Type G or GK of the GN 617 indexing plungers have been designed for applications where the indexing plunger is not operated with the standard knob.
The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	12.34 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Locking plungers, Plunger protruded

GANTER

If not operated, the plunger of the locking plungers GN 816 protrudes. To retract, move against the spring force and hold in the end position by turning by 90°.
The shape of the cam curve secures the plunger against accidental operation.
When operating the button (Type AR / ARK), the visible red covering sleeve indicates the locking status: Indexing pin does not protrude.
For the execution with operation with key (Type B / BK) a key is required to move the plunger. In this execution, a cover sleeve provides additional security and safety from unauthorized removal of the locking plunger. The cover sleeve also provides additional protection against malfunction caused by dirt.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	19.28 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Spring latches with flange for surface mounting

GANTER

Spring latches GN 722.2 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.
Spring latches GN 722.2 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	13.40 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Stainless Steel-Indexing plungers

GANTER

The indexing plungers GN 613 are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator, GN 817 indexing plungers are to be preferred.
A special screw driver GN 613.1 is available. Two slots are provided in the upper end of the body which are accessible with the knob in its retracted position.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	18.68 €
Consegna da ：	4 giorni

*Prezzo unitario in configurazione base

Stainless Steel-Indexing plungers

GANTER

GN 7017 Stainless Steel-Indexing plungers are activated through a lever and are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	7.84 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Stantuffo in acciaio inossidabile, design igienico laterale del perno della manopola (full hygie

GANTER

Sconto volumi elevati

A partire da^∗ ：	101.94 €
Consegna da ：	7 giorni

*Prezzo unitario in configurazione base

Cam action indexing plunger, Plunger pin retracted

GANTER

Cam action indexing plungers GN 712.1 are used in such applications where the plunger pin has to protrude only occasionally. When turning the cam by 90° resp. 120° degrees in clockwise direction, the plunger pin is moved through a curved opening in the body. After that, the plunger pin is protruded.
Depending on the type, the plunger pin is moved back by a spring in its original position (Type A), is held in protruded position (Type R), resp. is secured against accidental operation (Type S). In order to move the plunger pin, safety version Type S requires an additional pushing of the latch.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	25.30 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Cam action indexing plungers for welding

GANTER

Cam action indexing plungers GN 612.3 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A notch keeps the plunger in this position.
The square body can therefore be welded in any required position. In order to prevent a change in the spring load by the transferred heat we recommend spot welding the plunger body.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	19.74 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Cam action indexing plungers with flange

GANTER

Cam action indexing plungers GN 612.10 are used in cases where the plunger must not protrude all the time. By rotating the lever through 180° the plunger withdraws itself. The notch allows safe positioning.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	9.74 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Cam action indexing plungers, flange for surface mounting

GANTER

Cam action indexing plungers GN 612.2 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A notch keeps the plunger in this position.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	30.78 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Cam action indexing plungers, Plunger pin protruded

GANTER

Cam action indexing plungers GN 712 are used in such applications where the plunger pin must not protrude continually. When turning the cam by 90° resp.120° degrees in anti-clockwise direction, the plunger pin is moved through a curved opening in the body. After that, the plunger pin is retracted.
Depending on the type, the plunger pin is moved back by a spring in its original position (Type A), is held in retracted position (Type R), resp. is secured against accidental operation (Type S).
In order to move the plunger pin, safety version Type S requires an additional lifting of the latch.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	23.74 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Cam action indexing plungers, Stainless Steel

GANTER

Stainless Steel-Cam action indexing plungers GN 612 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A groove is provided in either position to prevent the lock from rotating.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	16.82 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Cam action indexing plungers, Steel

GANTER

Cam action indexing plungers GN 612 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A groove is provided in either position to prevent the lock from rotating.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	14.08 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Cam action indexing plungers, Steel, with locking function

GANTER

The groove on GN 721.1 cam action indexing plungers ensures that the locking pin remains in its withdrawn position.
For opposing cam action indexing plungers the left or right-handed types allow practical use, that is the same setting of the lock.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	17.40 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Cam action indexing plungers, Steel, without locking function

GANTER

For GN 721 cam action indexing plungers the indexing plunger pin is withdrawn by turning the lock by 180°.
When the cam action indexing plungers are positioned symmetrically, the left or right handed types allow for a practical, i.e. equal, direction setting of the lock.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	17.50 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Cam action indexing plungers, Zinc die casting

GANTER

Cam action indexing plungers GN 612.8 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. The notch allows safe positioning.
These cam action indexing plungers made of die-cast zinc are very reasonably priced design versions.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	7.30 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Clamping indexing plungers with safety function

GANTER

Clamping indexing GN 7336.8 plungers are an advanced development of the GN 7336.7 clamping knobs with indexing plunger.
Like the latter, they are used for positioning, securing and clamping adjusting elements at the same time. This configuration ensures that the indexing pin cannot be pulled from the indexing bore by turning the knurled knob, but only be deliberately pulling the handle (safety function).

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	23.38 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Double ring spanner

GANTER

Double ring spanner

Sconto volumi elevati

A partire da^∗ ：	3.06 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Indexing plunger, Steel / Plastic knob

GANTER

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	8.36 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Indexing plungers for precision locating

GANTER

Indexing plungers GN 817.3 realize a reasonable priced precision locating when guide bushes DIN 179 are used.
For this purpose a guide bush DIN 179 is used as guide, whereby the dimension l3 of the plunger determines the length of the bush.
The precise location is, therefore, not dependent on the guide pin in the plunger, but on the accuracy of the guide bush (bore tolerance F7) and the plunger (tolerance h7). Both components are hardened and ground. It goes without saying that the bush length also influences the accuracy of the positioning.
Type C is used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	24.28 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Indexing plungers for thin walled equipment

GANTER

Indexing plungers GN 607.2 have been developed for installation in thin walled equipment.
It has to be taken into consideration that, depending on the mounting plate thickness 's', the protruding plunger length 'l1' and the position of the hexagon nut on its centre bush, the plunger nose might not always be fully retractable.
For design reasons the positional accuracy of this indexing plunger is not as precise as plunger GN 607.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	16.86 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Indexing plungers for welding, with rest position

GANTER

Indexing plungers GN 607.5 with rest position are used in cases where the indexing pin is temporarily not allowed to protrude. After pulling out, the knob is turned by 90°.

A notch keeps the plunger in this position.

The GN 607.5 indexing plungers are intended for welded fixing, in particular for use in steel square tubings.

The lug d2 is intended for positioning.

The plastic knob with the in-moulded indexing pin is driven on after the welding process.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	15.20 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Indexing plungers for welding, without rest position

GANTER

Indexing plungers GN 607.4 are designed for welded fixing, in particular for use in steel square tubings.
The lug d2 is intended for positioning.
The plastic knob with the in-moulded indexing pin is driven on after the welding process.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	14.44 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Indexing plungers with red knob

GANTER

Indexing plungers GN 817.1 (Type C) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	9.86 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Indexing plungers with rest position, for thin walled equipment

GANTER

Indexing plungers GN 607.3 have been developed for installation in thin walled equipment.
It has to be taken into consideration that, depending on the mounting plate thickness 's', the protruding plunger length 'l1' and the position of the hexagon nut on its centre bush, the plunger nose might not always be fully retractable.
For design reasons the positional accuracy of this indexing plunger is not as precise as plunger GN 607.
Indexing plungers with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	18.96 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Indexing plungers with rest position, Plunger Steel

GANTER

Indexing plungers GN 608.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
Indexing plungers GN 608.1 are distinguished for their small dimensions. The locking tab is integrated into the knob thus giving reliable operation at all times.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	8.78 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Indexing plungers with rest position, Stainless Steel / Plastic knob

GANTER

Stainless Steel-Indexing plungers GN 617.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted.
A notch keeps the plunger in this position.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	14.60 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Indexing plungers with T-Handle

GANTER

Indexing plungers GN 817.4 are similar to GN 817, but with a T-handle instead of a round head.
This shape allows better visual orientation of the indexing position of Type C and is advantageous when greater unlocking forces occur.
Type C with rest position is used in such applications where the plunger must not protrude continually. In that case the knob is retracted and afterwards turned by 90°. A notch keeps the plunger in this position.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	9.14 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Indexing plungers without thread, Steel / Plastic knob

GANTER

Indexing plungers GN 618 without thread are for applications where welding, resin bonding (Loctite) or clamping is favoured.
Type G has been designed for applications where the indexing plunger is not operated with the standard knob.
The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), additional information can be submitted on request.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	7.94 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Indexing plungers, plunger conical

GANTER

Indexing plungers GN 817.5 allow highly accurate positioning, with the guidance made by the positioning bushings DIN 172 / DIN 179 with cylindrical bore. The actual indexing bore is fitted with positioning bushings GN 172.1 / GN 179.1 with conical bores.
The conical shape of the indexing pin / the indexing bore makes the positioning virtually clearance-free and therefore highly precise.
Type C is used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	33.98 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Indexing plungers, Plunger Stainless Steel

GANTER

Stainless Steel-Indexing plungers GN 608.5 are distinguished for their small dimensions.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	11.06 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Indexing plungers, Plunger Steel

GANTER

Indexing plungers GN 608 are distinguished for their small dimensions.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	8.30 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Indexing plungers, removable

GANTER

Indexing plungers GN 817.8 have been designed such that special versions of the indexing pins can also be made economically in smaller unit quantities.
If reqired, the indexing pins can be machined or made by the user as shown in the drawing above. They are assembled with a countersunk screw and can therefore be assembled several times. All parts are supplied in a non-assembled set.
The indexing plungers type C / CK are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	12.16 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Indexing plungers, removable

GANTER

Indexing plungers GN 817.9 have been designed such that special versions of the indexing pins can also be made economically in smaller unit quantities.
If reqired, the indexing pins can be machined or made by the user as shown in the drawing above. They are assembled with a countersunk screw and can therefore be assembled several times. All parts are supplied in a non-assembled set.
The indexing plungers type C are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	14.36 €
Consegna da ：	4 giorni

*Prezzo unitario in configurazione base

Indexing plungers, Stainless Steel / plastic knob

GANTER

Type G or GK of the indexing plungers GN 613 have been designed for applications where the indexing plunger is not operated with the standard knob.
The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.
A special screw driver GN 613.1 is available. Two slots are provided in the upper end of the body which are accessible with the knob in its retracted position.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	10.86 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Indexing plungers, Stainless Steel / Plastic-knob

GANTER

Stainless Steel-Indexing plungers GN 607.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
Stainless Steel-Indexing plungers GN 607.1 are distinguished for their small dimensions. The extremely low Stainless Steel-Lock nuts GN 909.5 enlarge the mounting options. The locking tab is an integral part of the knob thus giving reliable operation at all times.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	22.44 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Indexing plungers, Stainless Steel / Plastic-knob

GANTER

Stainless Steel-Indexing plungers GN 607 are distinguished for their small dimensions.
The extremely low Stainless Steel-Lock nuts GN 909.5 enlarge the mounting options.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	14.80 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Indexing plungers, Stainless Steel, with knob, with and without rest position

GANTER

GN 717 Stainless Steel-Indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	5.40 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Indexing plungers, Steel

GANTER

GN 7017 indexing plungers are activated through a lever and are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	6.34 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Indexing plungers, Steel / long Plastic-knob

GANTER

Indexing plungers GN 817.2 correspond to GN 817, they only differ by a longer knob.
Type C / CK are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	9.16 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base


Marchio
Serie prodotto
CAD
A partire da^∗
Consegna da ：
Tipo
Meccanismo di blocco
Metodo di montaggio
Lunghezza complessiva
Materiale corpo
Tutto in acciaio inox
Materiale punta
Diametro esterno M(mm)
Corsa S(mm)
Trattamento superficie punta
Trattamento termico punta
D.E. punta d(Ø)
Lunghezza L(mm)


Marchio	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER
Serie prodotto	Indexing plungers, Steel / Plastic-knob	Spring bolts, Stainless Steel / Plastic knob	Cam action indexing plungers with flange	Clamping knobs with indexing plunger	Indexing plungers with rest position, Steel / Plastic knob	Indexing plungers, Stainless Steel / Plastic knob	Locking plungers, Plunger protruded	Spring latches with flange for surface mounting	Stainless Steel-Indexing plungers	Stainless Steel-Indexing plungers	Stantuffo in acciaio inossidabile, design igienico laterale del perno della manopola (full hygie	Cam action indexing plunger, Plunger pin retracted	Cam action indexing plungers for welding	Cam action indexing plungers with flange	Cam action indexing plungers, flange for surface mounting	Cam action indexing plungers, Plunger pin protruded	Cam action indexing plungers, Stainless Steel	Cam action indexing plungers, Steel	Cam action indexing plungers, Steel, with locking function	Cam action indexing plungers, Steel, without locking function	Cam action indexing plungers, Zinc die casting	Clamping indexing plungers with safety function	Double ring spanner	Indexing plunger, Steel / Plastic knob	Indexing plungers for precision locating	Indexing plungers for thin walled equipment	Indexing plungers for welding, with rest position	Indexing plungers for welding, without rest position	Indexing plungers with red knob	Indexing plungers with rest position, for thin walled equipment	Indexing plungers with rest position, Plunger Steel	Indexing plungers with rest position, Stainless Steel / Plastic knob	Indexing plungers with T-Handle	Indexing plungers without thread, Steel / Plastic knob	Indexing plungers, plunger conical	Indexing plungers, Plunger Stainless Steel	Indexing plungers, Plunger Steel	Indexing plungers, removable	Indexing plungers, removable	Indexing plungers, Stainless Steel / plastic knob	Indexing plungers, Stainless Steel / Plastic-knob	Indexing plungers, Stainless Steel / Plastic-knob	Indexing plungers, Stainless Steel, with knob, with and without rest position	Indexing plungers, Steel	Indexing plungers, Steel / long Plastic-knob
CAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
A partire da^∗	7.34 € *Prezzo unitario in configurazione base Sconto volumi elevati	12.86 € *Prezzo unitario in configurazione base Sconto volumi elevati	8.98 € *Prezzo unitario in configurazione base Sconto volumi elevati	8.00 € *Prezzo unitario in configurazione base Sconto volumi elevati	9.98 € *Prezzo unitario in configurazione base Sconto volumi elevati	12.34 € *Prezzo unitario in configurazione base Sconto volumi elevati	19.28 € *Prezzo unitario in configurazione base Sconto volumi elevati	13.40 € *Prezzo unitario in configurazione base Sconto volumi elevati	18.68 € *Prezzo unitario in configurazione base Sconto volumi elevati	7.84 € *Prezzo unitario in configurazione base Sconto volumi elevati	101.94 € *Prezzo unitario in configurazione base Sconto volumi elevati	25.30 € *Prezzo unitario in configurazione base Sconto volumi elevati	19.74 € *Prezzo unitario in configurazione base Sconto volumi elevati	9.74 € *Prezzo unitario in configurazione base Sconto volumi elevati	30.78 € *Prezzo unitario in configurazione base Sconto volumi elevati	23.74 € *Prezzo unitario in configurazione base Sconto volumi elevati	16.82 € *Prezzo unitario in configurazione base Sconto volumi elevati	14.08 € *Prezzo unitario in configurazione base Sconto volumi elevati	17.40 € *Prezzo unitario in configurazione base Sconto volumi elevati	17.50 € *Prezzo unitario in configurazione base Sconto volumi elevati	7.30 € *Prezzo unitario in configurazione base Sconto volumi elevati	23.38 € *Prezzo unitario in configurazione base Sconto volumi elevati	3.06 € *Prezzo unitario in configurazione base Sconto volumi elevati	8.36 € *Prezzo unitario in configurazione base Sconto volumi elevati	24.28 € *Prezzo unitario in configurazione base Sconto volumi elevati	16.86 € *Prezzo unitario in configurazione base Sconto volumi elevati	15.20 € *Prezzo unitario in configurazione base Sconto volumi elevati	14.44 € *Prezzo unitario in configurazione base Sconto volumi elevati	9.86 € *Prezzo unitario in configurazione base Sconto volumi elevati	18.96 € *Prezzo unitario in configurazione base Sconto volumi elevati	8.78 € *Prezzo unitario in configurazione base Sconto volumi elevati	14.60 € *Prezzo unitario in configurazione base Sconto volumi elevati	9.14 € *Prezzo unitario in configurazione base Sconto volumi elevati	7.94 € *Prezzo unitario in configurazione base Sconto volumi elevati	33.98 € *Prezzo unitario in configurazione base Sconto volumi elevati	11.06 € *Prezzo unitario in configurazione base Sconto volumi elevati	8.30 € *Prezzo unitario in configurazione base Sconto volumi elevati	12.16 € *Prezzo unitario in configurazione base Sconto volumi elevati	14.36 € *Prezzo unitario in configurazione base Sconto volumi elevati	10.86 € *Prezzo unitario in configurazione base Sconto volumi elevati	22.44 € *Prezzo unitario in configurazione base Sconto volumi elevati	14.80 € *Prezzo unitario in configurazione base Sconto volumi elevati	5.40 € *Prezzo unitario in configurazione base Sconto volumi elevati	6.34 € *Prezzo unitario in configurazione base Sconto volumi elevati	9.16 € *Prezzo unitario in configurazione base Sconto volumi elevati
Consegna da ：	Stesso giorno	Stesso giorno	Stesso giorno	Stesso giorno	Stesso giorno	Stesso giorno	Stesso giorno	Stesso giorno	4 giorni	Stesso giorno	7 giorni	5 giorni	5 giorni	Stesso giorno	5 giorni	5 giorni	Stesso giorno	Stesso giorno	5 giorni	5 giorni	Stesso giorno	5 giorni	5 giorni	Stesso giorno	Stesso giorno	Stesso giorno	5 giorni	Stesso giorno	5 giorni	5 giorni	Stesso giorno	Stesso giorno	Stesso giorno	Stesso giorno	Stesso giorno	Stesso giorno	Stesso giorno	Stesso giorno	4 giorni	Stesso giorno	Stesso giorno	Stesso giorno	Stesso giorno	Stesso giorno	Stesso giorno
Tipo	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Meccanismo di blocco	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Metodo di montaggio	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Lunghezza complessiva	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Materiale corpo	-	-	-	-	-	Acciaio inox	-	Acciaio inox	Acciaio inox	Acciaio inox	-	-	-	-	-	-	Acciaio inox	-	-	-	-	-	-	-	-	Acciaio	Acciaio	Acciaio	-	Acciaio	-	Acciaio inox	-	-	-	-	-	Acciaio	-	Acciaio inox	Acciaio inox	Acciaio inox	Acciaio inox	Acciaio	-
Tutto in acciaio inox	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Materiale punta	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Diametro esterno M(mm)	-	-	16 ～ 20	-	-	-	-	-	-	-	-	-	-	16 ～ 20	16 ～ 20	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Corsa S(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Trattamento superficie punta	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Trattamento termico punta	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
D.E. punta d(Ø)	4 ～ 16	5 ～ 10	6 ～ 12	-	5 ～ 10	5 ～ 10	6 ～ 10	8 ～ 14	5 ～ 10	4 ～ 10	-	6 ～ 8	-	6 ～ 12	6 ～ 12	6 ～ 10	4 ～ 12	4 ～ 12	5 ～ 10	5 ～ 10	4 ～ 12	-	-	5 ～ 10	6 ～ 10	6 ～ 8	6 ～ 8	6 ～ 8	6 ～ 10	6 ～ 8	6 ～ 8	5 ～ 10	6 ～ 12	5 ～ 8	6 ～ 10	6 ～ 8	6 ～ 8	7 ～ 12	7 ～ 10	5 ～ 10	6 ～ 8	6 ～ 8	3 ～ 10	4 ～ 10	4 ～ 12
Lunghezza L(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Seleziona per:

Stock

- Stock Items Included
Ripristina

Limitare la ricerca specificando Spec./Dim.

Meccanismo di blocco
- Non fornito
- Blocco puntale
- Ritorno
Immagini

Ripristina

Metodo di montaggio
- Attacco a vite
- Accoppiamento con interferenza
- Montaggio bullone
- Altro
- Flangia
Ripristina

Lunghezza complessiva
- Standard
- Tipo corto
Ripristina

Materiale corpo
- Acciaio
- Acciaio inox
- Zinco pressofuso
- Altro
Ripristina

Tutto in acciaio inox
- Applicabile
- non Conforme
Ripristina

Materiale punta
- Acciaio
- Acciaio inox
Ripristina

Diametro esterno M(mm)
3

5

6

8

10

12

14

16

18

20
Disegno

Ripristina

Corsa S(mm)
3.5

4

5

5-9

6

6-10

7

7.5

8

9

9.5

10

12

14

15

16

18

19

24

25
Disegno

Ripristina

Trattamento superficie punta
- Non fornito
- Ossido nero
- Cromatura trivalente
- Nichelatura chimica
- Nichelatura
Ripristina

Trattamento termico punta
- Non fornito
- Temprato
- Cementazione
Ripristina

D.E. punta d(Ø)
2

2.5

3

4

5

6

7

7.1

8

M8 x 1

8.28

10

M10 x 1

11.52

12

M12 x 1,5

14

15.49

16

M16 x 1,5

18

19.7

20

M20 x 1,5

22

25

30

60

80
Disegno

Ripristina

Lunghezza L(mm)
25

26.5

30

30.5

31

32

33

34

34.5

35

36

37

37.5

38

39

40

40.5

41

42

42.5

43

43.5

44

44.5

45

46

47

47.5

48

49

50

51

52

53

54

54.5

56

56.5

57

57.25

57.5

58

58.5

59

59.5

60.5

61

62

63

63.5

64.5

65

66

68

68.5

69

70

70.5

71

73

74

75

75.5

77

79

80

80.5

82

83

84

85

91

92

99.9

123
Disegno

Ripristina

Limitare la ricerca specificando il produttore

- MISUMI (19)
- Prodotti convenienti ()
- KIPP (98)
- GANTER (88)
- HALDER (37)
- NABEYA BI-TECH (25)
- KONISHI MFG (19)
- ELESA (4)
- NABEYA (1)
- TOSHIN CASTER (1)
Ripristina

Limitare la ricerca specificando Tipo dati CAD

- 2D
- 3D
Ripristina

Limitare la ricerca specificando Tempi di consegna

Tutti gli articoli

Stesso giorno

2 giorni o meno

3 giorni o meno

4 giorni o meno

5 giorni o meno

6 giorni o meno

7 giorni o meno

8 giorni o meno

9 giorni o meno

10 giorni o meno
Ripristina