Pistoncini（pagina 3）
Filtrare i prodotti per: Tipo
?* Informazioni su tempi di consegna e prezzi
-
Maniglie removibili, per perni di centraggio e bloccaggio
HALDER
La maniglia permette l'azionamento manuale in maniera facile e veloce del perno di posizionamento e bloccaggio.- Dati CAD disponibili in formato 3D
Configura oraA partire da∗ ： 8.54 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Cam action indexing plungers with flange
GANTER
Cam action indexing plungers GN 612.10 are used in cases where the plunger must not protrude all the time. By rotating the lever through 180° the plunger withdraws itself. The notch allows safe positioning.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 10.12 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Cam action indexing plungers with flange
GANTER
Cam action indexing plungers GN 612.9 are used in cases where the plunger must not protrude all the time. By rotating the lever through 180° the plunger withdraws itself. The notch allows safe positioning.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 10.00 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Cam action indexing plungers, Stainless Steel
GANTER
Stainless Steel-Cam action indexing plungers GN 612 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A groove is provided in either position to prevent the lock from rotating.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 17.32 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Clamping knobs with indexing plunger
GANTER
Clamping knobs with indexing plunger GN 7336.7 are used for positioning, securing and clamping adjusting elements at the same time.
The axial movement of the handle (pulling) pulls the indexing pin from the engaged position against the spring force, with the star know at the same time remaining connected with form-lock to the clamping screw via a hexagonal element, allowing both clamping and releasing.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 8.56 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plunger, Steel / Plastic knob
GANTER
Type G or GK of the GN 617 indexing plungers have been designed for applications where the indexing plunger is not operated with the standard knob.
The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 9.36 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Indexing plungers with rest position, Plunger Steel
GANTER
Indexing plungers GN 608.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
Indexing plungers GN 608.1 are distinguished for their small dimensions. The locking tab is integrated into the knob thus giving reliable operation at all times.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 9.20 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plungers with rest position, Stainless Steel / Plastic knob
GANTER
Stainless Steel-Indexing plungers GN 617.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted.
A notch keeps the plunger in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 15.78 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plungers without thread, Steel / Plastic knob
GANTER
Indexing plungers GN 618 without thread are for applications where welding, resin bonding (Loctite) or clamping is favoured.
Type G has been designed for applications where the indexing plunger is not operated with the standard knob.
The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), additional information can be submitted on request.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 8.66 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plungers, Plunger Stainless Steel
GANTER
Stainless Steel-Indexing plungers GN 608.5 are distinguished for their small dimensions.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 14.20 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plungers, Plunger Steel
GANTER
Indexing plungers GN 608 are distinguished for their small dimensions.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 8.76 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plungers, removable
GANTER
Indexing plungers GN 817.8 have been designed such that special versions of the indexing pins can also be made economically in smaller unit quantities.
If reqired, the indexing pins can be machined or made by the user as shown in the drawing above. They are assembled with a countersunk screw and can therefore be assembled several times. All parts are supplied in a non-assembled set.
The indexing plungers type C / CK are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 12.46 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plungers, Stainless Steel / Plastic knob
GANTER
Type G or GK of the GN 617 indexing plungers have been designed for applications where the indexing plunger is not operated with the standard knob.
The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 13.00 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plungers, Stainless Steel / Plastic-knob
GANTER
Stainless Steel-Indexing plungers GN 607.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
Stainless Steel-Indexing plungers GN 607.1 are distinguished for their small dimensions. The extremely low Stainless Steel-Lock nuts GN 909.5 enlarge the mounting options. The locking tab is an integral part of the knob thus giving reliable operation at all times.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 23.32 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plungers, Stainless Steel / Plastic-knob
GANTER
Stainless Steel-Indexing plungers GN 607 are distinguished for their small dimensions.
The extremely low Stainless Steel-Lock nuts GN 909.5 enlarge the mounting options.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 18.86 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plungers, Stainless Steel, with knob, with and without rest position
GANTER
GN 717 Stainless Steel-Indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 5.58 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plungers, Steel / long Plastic-knob
GANTER
Indexing plungers GN 817.2 correspond to GN 817, they only differ by a longer knob.
Type C / CK are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 10.52 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plungers, Steel / Plastic-knob
GANTER
Indexing plungers GN 607.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
Indexing plungers GN 607.1 are distinguished for their small dimensions. The extremely low Stainless Steel-Lock nuts GN 909 enlarge the mounting options. The locking tab is an integral part of the knob thus giving reliable operation at all times.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 13.62 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plungers, Steel / Plastic-knob
GANTER
Indexing plungers GN 607 are distinguished for their small dimensions.
The extremely low lock nuts GN 909 enlarge the mounting options.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 11.42 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Indexing plungers, Steel, with red knob
GANTER
Indexing plungers GN 817 with rest position (Type C / CK) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 7.80 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Mini indexing plungers Zinc die casting / Plastic-knob
GANTER
Mini indexing plungers GN 822.8 are distinguished for their small dimensions. They are mounted by countersunk screws.
The mini indexing plungers present an affordable alternative to the GN 608 and GN 608.1 indexing plungers.
In type C, the button can be turned by 30° after retracting the indexing pin, holding it in the “retraced” position using the indexing lock.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 6.38 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Mini indexing plungers, covered indexing mechanism
GANTER
Mini indexing plungers GN 822 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.
They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
With Type C the knob can be turned by 30° and a notch keeps the knob in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 5.58 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Mini indexing plungers, covered indexing mechanism, with red knob
GANTER
Mini indexing plungers GN 822 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.
They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
With type C the knob can be turned by 30° and a notch keeps the knob in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 5.36 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Mini indexing plungers, Stainless Steel / Plastic knob
GANTER
Mini indexing plungers GN 822.7 are distinguished for their small dimensions.
Based on the principle of the mini indexing plungers GN 822, this model combines their clever type of construction with a complete series of all current sizes of bolts and threads. They provide a reasonably priced alternative to the GN 607 / GN 607.1 indexing plungers of the appropriate sizes. To mount, first turn the mini indexing plunger in with the knurled button. Pulling the indexing pin will release the hexagon nut which can then be tightened with an open-end spanner.
They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
In type C, the button can be turned by 30° after retracting the indexing pin, holding it in the “retraced” position using the indexing lock.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 6.46 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Spring bolts, Stainless Steel / Plastic knob
GANTER
The plunger of the Stainless Steel-Spring bolts GN 313 does not protrude in the inoperative position.
It can be operated manually or in Type D and DK mechanically (pneumatic cylinder, cam plate, etc.) when it will protrude only as long as it is operated.
Using the internal thread at identification 2 on the pressure side, special pressure bolts or a rod arrangement can be operated, for instance.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 13.50 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Spring bolts, Steel / Plastic knob
GANTER
The plunger of the spring bolts GN 313 does not protrude in the inoperative position.
It can be operated manually or in Type D and DK mechanically (pneumatic cylinder, cam plate, etc.) when it will protrude only as long as it is operated.
Using the internal thread at identification 2 on the pressure side, special pressure bolts or a rod arrangement can be operated, for instance.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 9.38 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Spring latches with flange for surface mounting
GANTER
Spring latches GN 722.2 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.
Spring latches GN 722.2 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 13.78 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Spring latches with flange for surface mounting
GANTER
Spring latches GN 722.3 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°.
A lock notch will hold the latch in both positions.
Spring latches GN 722.3 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 15.48 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Stainless Steel-Cam action indexing plungers, with locking function
GANTER
For GN 721.5 Stainless Steel-Cam action indexing plungers the indexing plunger pin is withdrawn by turning the lock by 180°.
When the cam action indexing plungers are positioned symmetrically, the left or right handed types allow for a practical, i.e. equal, direction setting of the lock.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 22.30 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Stainless Steel-Cam action indexing plungers, without locking function
GANTER
For GN 721.5 Stainless Steel-Cam action indexing plungers the indexing plunger pin is withdrawn by turning the lock by 180°.
When the cam action indexing plungers are positioned symmetrically, the left or right handed types allow for a practical, i.e. equal, direction setting of the lock.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 27.72 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Stainless Steel-Indexing plungers
GANTER
The indexing plungers GN 617 are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 42.98 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Stainless Steel-Indexing plungers
GANTER
GN 7017 Stainless Steel-Indexing plungers are activated through a lever and are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 10.26 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Stainless Steel-Indexing plungers
GANTER
Stainless Steel-Indexing plungers GN 617.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 30.50 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Stainless Steel-Indexing plungers / Plastic knob
GANTER
Stainless Steel-Indexing plungers GN 817 with rest position (Type C / CK) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 12.32 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Stainless Steel-Indexing plungers with long plastic knob
GANTER
Stainless Steel-Indexing plungers GN 817.2 correspond to GN 817, they only differ by a longer knob.
Type C / CK are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 14.68 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Stainless Steel-Indexing plungers with red knob
GANTER
Stainless Steel-Indexing plungers GN 817 with rest position (Type C / CK) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 12.36 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Stainless Steel-Indexing plungers with T-handle
GANTER
Stainless Steel-Indexing plungers GN 817.4 are similar to GN 817, but with a T-handle instead of a round head.
This shape allows better visual orientation of the indexing position of Type C and is advantageous when greater unlocking forces occur.
Type C with rest position is used in such applications where the plunger must not protrude continually. In that case the knob is retracted and afterwards turned by 90°. A notch keeps the plunger in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 19.36 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Stainless Steel-Indexing plungers, removable
GANTER
Indexing plungers GN 817.8 have been designed such that special versions of the indexing pins can also be made economically in smaller unit quantities.
If reqired, the indexing pins can be machined or made by the user as shown in the drawing above. They are assembled with a countersunk screw and can therefore be assembled several times. All parts are supplied in a non-assembled set.
The indexing plungers type C / CK are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 18.80 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Stainless Steel-Mini indexing plungers
GANTER
Stainless Steel-Mini indexing plungers GN 822.7 are distinguished for their small dimensions.
Based on the principle of the mini indexing plungers GN 822, this model combines their clever type of construction with a complete series of all current sizes of bolts and threads. They provide a reasonably priced alternative to the GN 607 / GN 607.1 indexing plungers of the appropriate sizes. To mount, first turn the mini indexing plunger in with the knurled button. Pulling the indexing pin will release the hexagon nut which can then be tightened with an open-end spanner.
The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
In type CN, the button can be turned by 30° after retracting the indexing pin, holding it in the “retraced” position using the indexing lock.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 14.56 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Stainless Steel-Mini indexing plungers, with and without rest position
GANTER
Stainless Steel-Mini indexing plungers GN 822.9 are distinguished for their small dimensions. They are mounted by countersunk screws.
The Stainless Steel-Mini indexing plungers present an affordable alternative to the GN 608.5 and GN 608.6 Stainless Steel-Indexing plungers.
In types C and CN, the button can be turned by 30° after retracting the indexing pin, holding it in the "retraced" position using the indexing lock.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 21.52 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Stainless Steel-Spring latches with flange for surface mounting
GANTER
Spring latches GN 722.3 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.
Spring latches GN 722.3 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 32.00 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
PMT.110 - Pistoncini di posizionamento a molla -Corpo in SUPER-tecnopolimero
ELESA
Pistoncini di posizionamento a molla con corpo filettato in SUPER-tecnopolimero a base poliammidica rinforzato fibra vetro, puntale in acciaio temprato e brunito o acciaio INOX AISI 303, manopola in tecnopolimero a base poliammidica alta resilienza colore grigio-nero, molla in acciaio INOX AISI 302 e controdado in SUPER-tecnopolimero a base poliammidica rinforzato fibra vetro.Grazie al basso coefficiente di attrito del materiale, non è richiesta l'applicazione di grasso lubrificante.- Sconto volumi elevati
Configura oraA partire da∗ ： 11.73 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
| Marchio |
|---|
| Serie prodotto |
| CAD |
| A partire da∗ |
| Consegna da |
| Tipo |
| Meccanismo di blocco |
| Metodo di montaggio |
| Lunghezza complessiva |
| Materiale corpo |
| Tutto in acciaio inox |
| Materiale punta |
| Diametro esterno M(mm) |
| Corsa S(mm) |
| Trattamento superficie punta |
| Trattamento termico punta |
| D.E. punta d(Ø) |
| Lunghezza L(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Marchio | HALDER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | ELESA |
| Serie prodotto | Indexing plungers with rest position, Stainless Steel / Plastic knob | Indexing plungers, Stainless Steel, with knob, with and without rest position | Mini indexing plungers, covered indexing mechanism, with red knob | Stainless Steel-Cam action indexing plungers, with locking function | Stainless Steel-Cam action indexing plungers, without locking function | Stainless Steel-Mini indexing plungers, with and without rest position | Stainless Steel-Spring latches with flange for surface mounting | PMT.110 - Pistoncini di posizionamento a molla -Corpo in SUPER-tecnopolimero | ||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| A partire da∗ | 8.54 € *Prezzo unitario in configurazione base | 10.12 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 10.00 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 17.32 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 8.56 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 9.36 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 9.20 € *Prezzo unitario in configurazione base Sconto volumi elevati | 15.78 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 8.66 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 14.20 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 8.76 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 12.46 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 13.00 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 23.32 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 18.86 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 5.58 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 10.52 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 13.62 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 11.42 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 7.80 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 6.38 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 5.58 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 5.36 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 6.46 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 13.50 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 9.38 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 13.78 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 15.48 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 22.30 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 27.72 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 42.98 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 10.26 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 30.50 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 12.32 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 14.68 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 12.36 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 19.36 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 18.80 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 14.56 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 21.52 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 32.00 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 11.73 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati |
| Consegna da | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno |
| Tipo | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Meccanismo di blocco | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Metodo di montaggio | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Lunghezza complessiva | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Materiale corpo | Acciaio inox | - | - | Acciaio inox | - | - | - | Acciaio inox | - | - | - | Acciaio | Acciaio inox | Acciaio inox | Acciaio inox | Acciaio inox | - | Acciaio | Acciaio | - | - | Acciaio / Acciaio inox | Acciaio / Acciaio inox | - | - | - | Acciaio inox | - | - | - | Acciaio inox | Acciaio inox | Acciaio inox | Acciaio inox | Acciaio inox | Acciaio inox | Acciaio inox | Acciaio inox | - | - | Acciaio inox | - |
| Tutto in acciaio inox | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Materiale punta | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Diametro esterno M(mm) | - | 16 ～ 20 | 16 ～ 20 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Corsa S(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Trattamento superficie punta | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Trattamento termico punta | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| D.E. punta d(Ø) | 60 | 6 ～ 12 | 8 ～ 12 | 4 ～ 12 | - | 5 ～ 10 | 6 | 5 ～ 10 | 5 ～ 8 | 8 | 6 | 7 ～ 12 | 5 ～ 10 | 6 ～ 8 | 8 | 3 ～ 10 | 5 ～ 6 | 6 ～ 8 | 6 ～ 8 | 4 ～ 16 | 4 ～ 10 | 4 ～ 6 | 4 ～ 7 | 4 ～ 10 | 5 ～ 10 | 5 ～ 10 | 8 ～ 14 | 12 ～ 14 | 5 ～ 10 | 8 | 10 | 5 ～ 10 | 5 ～ 10 | 4 ～ 16 | 4 ～ 12 | 4 ～ 16 | 6 ～ 12 | 7 ～ 12 | 4 ～ 10 | 4 ～ 6 | 12 ～ 14 | - |
| Lunghezza L(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Seleziona per:
Stock
-
- Indicare solo prodotti a magazzino
-
Meccanismo di blocco
-
Non fornito
-
Blocco puntale
-
Ritorno
-
Non fornito
-
Metodo di montaggio
-
Lunghezza complessiva
-
Materiale corpo
-
Tutto in acciaio inox
-
Materiale punta
-
Diametro esterno M(mm)
-
Corsa S(mm)
-
Trattamento superficie punta
-
Trattamento termico punta
-
D.E. punta d(Ø)
-
Lunghezza L(mm)
Produttore
-
- GANTER (54)
- HALDER (27)
- NABEYA BI-TECH (16)
- KONISHI MFG (11)
- ELESA (4)
- TOSHIN CASTER (1)
- KIPP (0)
- NABEYA (0)
- NORELEM (0)
Tipo dati CAD
-
- 2D
- 3D
Giorni di spedizione standard
-
- Tutti gli articoli
- Stesso giorno
- 2 giorni o meno
- 3 giorni o meno
- 4 giorni o meno
- 5 giorni o meno
- 6 giorni o meno
- 7 giorni o meno
- 8 giorni o meno
- 9 giorni o meno
- 11 giorni o meno
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.