JUNKOSHA Elementi di serraggio（Trattamento superficie：Non in dotazione）

?* Informazioni su tempi di consegna e prezzi

• 

  JUNRON Giunto manicotto in ottone (Resina)

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 for pneumatic fittings. The mechanism clamps on to the tube insert with the sleeve and the cap nut for a reliable connection. With collar thread seal for each R (PT) thread size.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	0.31 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  JUNRON Giunto unione T in ottone

  JUNKOSHA

  [Features]
  · The union tees of the metric Series conform to Japanese Industrial Standard JIS B8381 ‘Pneumatic Fittings’.
  · A mechanism where the tube insert is held and fastened by a sleeve and cap nut to create a secure connection
  · The connection will remain intact until the tube breaks.
  · Equipped with a threaded collar thread by R (PT) thread size.
  · Supports compressed air lines, water pressure, and hydraulic pressure.
  

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	5.51 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  JUNRON Giunto nipplo in acciaio inox

  JUNKOSHA

  Usable across a broad temperature range. No wear and tear to tubing as a result of the over tightening of cap nut, etc.
  
  [Features]
  · Because the product consists of SUS316, which has high corrosion resistance properties, it can be used in a wide temperature range, at both low and high temperatures.
  · Designed especially for fluorine polymer/nylon resin tubes, so the tube does not rupture due to excessive tightening of cap nuts, etc.
  · No abnormality in the connected part unless the tube is ruptured.
  · The tightening torque of the cap nut does not need to be managed.
  Fitting uses SUS316, so it resists rust.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	17.06 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  JUNRON Giunto nipplo in ottone

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings."
  The tube insert allows for secure connection of a sleeve and a cap nut.
  With collar thread seal for each R (PT) thread size.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	1.93 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  JUNRON Giunto gomito in ottone

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	3.67 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  JUNRON Giunto nipplo T in ottone

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 for "pneumatic pipe fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. Each R (PT) screw size has a different colored screw seal.

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	4.59 €
  Consegna da ：	10 giorni

  *Prezzo unitario in configurazione base

• 

  JUNRON Giunto di servizio T in ottone

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism clamps onto the tube insert with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	6.86 €
  Consegna da ：	10 giorni

  *Prezzo unitario in configurazione base

• 

  JUNRON Giunto unione flangia femmina in ottone

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.

  A partire da∗ ：	6.22 €
  Consegna da ：	10 giorni

  *Prezzo unitario in configurazione base

• 

  JUNRON Giunto unione gomito in ottone

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 for pneumatic fittings. The mechanism clamps on to the tube insert with the sleeve and the cap nut for a reliable connection. With collar thread seal for each R (PT) thread size.

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	6.41 €
  Consegna da ：	10 giorni

  *Prezzo unitario in configurazione base

• 

  JUNRON Giunto unione flangia in ottone

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.

  A partire da∗ ：	5.00 €
  Consegna da ：	12 giorni

  *Prezzo unitario in configurazione base

• 

  Raccordi in ottone Junlon - Dado cieco con griglia di protezione

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.

  A partire da∗ ：	3.03 €
  Consegna da ：	10 giorni

  *Prezzo unitario in configurazione base

• 

  JUNRON Giunto manicotto in ottone (Ottone)

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	0.84 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  JUNRON Dado copertura giunto in ottone

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism clamps onto the tube insertwith the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	0.68 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  JUNRON Giunto unione in ottone

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 for pneumatic fittings. The mechanism clamps on to the tube insert with the sleeve and the cap nut for a reliable connection. With collar thread seal for each R (PT) thread size.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	2.54 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  JUNRON Giunto a gomito in acciaio inox

  JUNKOSHA

  Usable across a broad temperature range. Prevents wear to tubing cost by over-tightening of cap nuts and the like. No abnormality in the connected part unless the tube ruptures. Does not require management of cap nut tightening torque.

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	27.68 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  JUNRON Giunto unione in acciaio inox

  JUNKOSHA

  Usable across a broad temperature range. Free of wear to tubing due to over-tightening of cap nut, etc. No abnormality in the connector unless the tube ruptures. Does not require management of cap nut tightening torque.

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	27.65 €
  Consegna da ：	10 giorni

  *Prezzo unitario in configurazione base

• 

  JUNRON Giunto unione T in acciaio inox

  JUNKOSHA

  Usable across a broad temperature range. Free of wear to tubing due to over-tightening of cap nuts, etc. No abnormality in the connector unless the tube ruptures. Does not require management of cap nut tightening torque.

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	51.84 €
  Consegna da ：	10 giorni

  *Prezzo unitario in configurazione base

• 

  JUNRON Giunto unione gomito in acciaio inox

  JUNKOSHA

  Usable across a broad temperature range. Free of wear to tubing due to over tightening of cap nut and the like. No abnormality in the connected part unless the tube ruptures. Does not require management of cap nut tightening torque.

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	36.03 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  JUNRON Giunto T in acciaio inox

  JUNKOSHA

  Usable across a broad temperature range. Free of wear to tubing due to over-tightening of cap nut, etc. No abnormality in the connector unless the tube ruptures. Does not require management of cap nut tightening torque.

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	40.18 €
  Consegna da ：	10 giorni

  *Prezzo unitario in configurazione base

• 

  JUNRON Giunto servizio T in acciaio inox

  JUNKOSHA

  Usable across a broad temperature range. Wear on tubing due to over tightening of the cap nut, etc. is eliminated.
  
  [Features]
  · As the product consists of SUS316, which has good corrosion resistance properties, it can be used in a wide temperature range from low to high.
  · Designed specially for fluorine polymer/nylon resin tubes to ensure that the tube does not rupture due to excessive tightening of the cap nut, etc.
  · No abnormalities are allowed in the connected part unless the tube ruptures.
  · The tightening torque of the cap nut does not need to be managed.
  Fitting uses SUS316, so it is rust resistant.

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	42.28 €
  Consegna da ：	12 giorni

  *Prezzo unitario in configurazione base

• 

  JUNRON Giunto Nipplo femmina in acciaio inox

  JUNKOSHA

  Usable across a broad temperature range. No wear and tear to tubing as a result of an over tightening of cap nut, etc. No abnormality in the connected part unless the tube is ruptured. Does not require management of cap nut tightening torque.

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	25.17 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  JUNRON Giunto unione flangia femmina in acciaio inox

  JUNKOSHA

  Usable across a broad temperature range. No wear and tear to tubing as a result of an over tightening of cap nut, etc. No abnormality in the connected part unless the tube is ruptured. Does not require management of cap nut tightening torque.

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	26.94 €
  Consegna da ：	10 giorni

  *Prezzo unitario in configurazione base

• 

  JUNRON Giunto unione femmina in acciaio inox

  JUNKOSHA

  Usable across a broad temperature range. No wear and tear to tubing as a result of the over tightening of cap nut, etc.
  
  [Features]
  · Because the product consists of SUS316, which has high corrosion resistance properties, it can be used in a wide temperature range, at both low and high temperatures.
  · Designed especially for fluorine polymer/nylon resin tubes, so the tube does not rupture due to excessive tightening of cap nuts, etc.
  · No abnormality in the connected part unless the tube is ruptured.
  · The tightening torque of the cap nut does not need to be managed.
  Fitting uses SUS316, so it resists rust.

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	45.49 €
  Consegna da ：	10 giorni

  *Prezzo unitario in configurazione base

• 

  JUNRON Giunto unione flangia maschio in acciaio inox

  JUNKOSHA

  Usable across a broad temperature range. No wear and tear to tubing as a result of the over tightening of cap nut, etc.
  
  [Features]
  · Because the product consists of SUS316, which has high corrosion resistance properties, it can be used in a wide temperature range, at both low and high temperatures.
  · Designed especially for fluorine polymer/nylon resin tubes, so the tube does not rupture due to excessive tightening of cap nuts, etc.
  · No abnormality in the connected part unless the tube is ruptured.
  · The tightening torque of the cap nut does not need to be managed.
  Fitting uses SUS316, so it resists rust.

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	30.04 €
  Consegna da ：	10 giorni

  *Prezzo unitario in configurazione base

• 

  JUNRON Giunto gomito posizionabile in acciaio inox

  JUNKOSHA

  Usable across a broad temperature range. Free of tubing wear due to over-tightening of cap nuts or the like. Connected parts will not break unless the tube ruptures. Does not require regular cap nut torque tightening.

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	32.61 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  JUNRON serie US2 nipplo per giunti in acciaio inox e tubi flessibili

  JUNKOSHA

  [Features]
  ▪ Stainless steel fittings for flexible tubing.
  ▪ To resolve tube twisting during piping, a unique mechanism of cap nuts built into the sleeve can be used.
  · Tightening torque of the cap nut does not need to be managed.

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	16.68 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  JUNRON serie US2 gomito per giunti in acciaio inox e tubi flessibili

  JUNKOSHA

  Stainless steel fittings for flexible tubing. To resolve snaking during piping, we use cap nuts built into the sleeve that use a mechanism unique to our company. Does not require management of cap nut tightening torque.

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	34.36 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  JUNRON serie US2 unione per giunti in acciaio inox e tubi flessibili

  JUNKOSHA

  Stainless steel fittings for flexible tubing. To resolve tube twisting during piping, cap nuts built into the sleeve that use the unique Junkosha mechanism are employed. The cap nut tightening torque does not require management.

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	42.00 €
  Consegna da ：	12 giorni

  *Prezzo unitario in configurazione base

• 

  JUNRON serie US2 unione T per giunti in acciaio inox e tubi flessibili

  JUNKOSHA

  Stainless steel fittings for flexible tubing. To resolve tube twisting during piping, we use cap nuts built into the sleeve that use a unique Junkosha mechanism. Does not require management of cap nut tightening torque.

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	93.20 €
  Consegna da ：	12 giorni

  *Prezzo unitario in configurazione base

Loading...