Guide lineari standard（Precarico：Standard）

?* Informazioni su tempi di consegna e prezzi

• 

  Carrello / carrello grande, dimensioni del carrello selezionabili / SHS

  THK

  An individual block from the THK LM guide SHS series. Extremely useful for sudden design changes and when performing maintenance.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance, and makes it possible to maintain a constant low friction coefficient, and increase rigidity in four directions.
  ·
  · Cross-section

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	72.04 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Guide profilate / carrello grande / SBI-SL, SBI-SLL

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  Consegna da ：	10 giorni

• 

  Guide profilate in miniatura / tipo di guida selezionabile / dimensioni del carrello selezionabili / SRS-G

  THK

  A full-ball type with not ball retainer on the SRS type.
  
  [Features]
  · The LM guide with ball retainer SRS type has a structure that includes two rolling sides on a compact body, which allows the load to be incurred from all sides, and can be used with a single shaft at locations that have limited space requirements and locations that use moment.
  · The adoption of the ball retainer has eliminated mutual friction between the balls, which provides excellent high speed, low noise, good sound quality, long life, and being maintenance-free for long periods of time.
  · The ball retainer eliminates the mutual friction between the balls, which improves the grease holdability and reduces the raised dust amount.
  · The LM block and LM rail both use stainless steel that are highly rust-proof.
  · The rail cross-section height is kept low, and it has a compact structure with a single left and right ball row, which allows it be mounted in space saving areas.
  · This is a lightweight type where a part (around the ball escape hole, etc.) of the LM block has been insert formed using resin materials.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  Consegna da ：	19 giorni

• 

  Guide profilate / dimensioni del carrello selezionabili / materiale selezionabile / SR

  THK

  A type with a compact structure that has a low cross-section height and is resilient against loads in the radial direction. More advantageous than HSR when incurring loads in the radial direction (longevity, precision, rigidity, etc.).
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.
  · Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
  · A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.
  · This is a self-aligning type that can easily absorb error in the level precision and the degree of parallelism for the two shafts, which is capable of highly precise and smooth movements.
  · The retainer part on each of the ball rows can obtain rolling motions with limited sound because of the balls being designed to smoothly circulate using the guiding part on the end plate.
  · It is possible to maintain precision of long periods of time, have excellent abrasion resistance and limited differential slipping even when there is a preload or uneven loads.
  · LM block, LM rail, and LM rail are all compatible with stainless steel.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  Consegna da ：	19 giorni

• 

  Sistemi di guida monorotaia in miniatura / tipo di guida selezionabile / dimensioni del carrello selezionabili / SRS

  THK

  A miniature type with a compact structure. Can be mounted in areas in space saving areas, and a part of the LM block has been formed using resin to achieve lightweight.
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
  Please place your orders in this manner.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  Consegna da ：	19 giorni

• 

  Mini pattini a sfere / acciaio inox / R0442 / R0443

  BOSCH REXROTH

  La versione miniaturizzata del sistema di binari di guida a sfere è stata sviluppata appositamente per il settore della meccanica di precisione, ovvero per la produzione di dispositivi ottici o elettronici di elaborazione dati, dove sono richieste guide a movimento lineare ad elementi volventi di dimensioni estremamente compatte ed elevata capacità di carico.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	50.76 €
  Consegna da ：	70 giorni

  *Prezzo unitario in configurazione base

• 

  Binari profilati / dimensioni dei binari selezionabili / materiale selezionabile / HSR

  THK

  No need to fret over delivery because the THK LM guide ships in three days. We have started selling individual rails due to customer requests we have received. The rail length can be designated at units of 1 mm.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  Consegna da ：	7 giorni

• 

  Guide profilate / dimensioni del carrello selezionabili / materiale selezionabile / SHS

  THK

  A standard type of LM guide with ball retainer. Incurs load from four directions which allows it to be used in any position.
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
  Please place your orders in this manner.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  Consegna da ：	19 giorni

• 

  Guide profilate / dimensioni del carrello selezionabili / materiale selezionabile / HSR

  THK

  A standard full-ball type. Incurs load from four directions which allows it to be used in any position. A series with the most abundance in variations in size and shape, etc.
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
  Please place your orders in this manner.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  Consegna da ：	19 giorni

• 

  Guide profilate / guida larga / carrello largo / materiale selezionabile / HRW

  THK

  A structure with a wide rail width and low center of gravity. HSR It is advantageous when there are Mc moment requirements and is thin compared with.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · Compact heavy load: A high number of effective balls makes it possible to obtain high rigidity in all directions. Has a wide rail width and can adequately withstand moments with a single shaft.
  There is a high rigidity in the horizontal direction and there is no need to for reinforcement such as horizontal pressing due to large secondary moments being incurred on the rail cross-section.
  · The self-aligning capability achieved from the unique circular arched-groove front face combination (DF set) makes it possible to absorb the mounting error even when there is a preload incurred, and it is also capable of obtaining a smooth linear motion at a high accuracy.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  Consegna da ：	19 giorni

• 

  Carrello / carrello grande, dimensioni del carrello selezionabili / materiale selezionabile / cuscinetto a ricircolo di sfere / HSR

  THK

  An individual block from the THK LM guide HSR series. Extremely useful for sudden design changes and when performing maintenance.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · The ball will not fall out even if the LM rail is removed because it is held by a holding plate. (Excludes the HSR8,10, and 12).
  · Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance, and makes it possible to maintain a constant low friction coefficient, and increase rigidity in four directions. Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	64.07 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Guide profilate / dimensioni delle guide selezionabili / SHS

  THK

  No need to fret over delivery because the THK LM guide ships in three days. We have started selling individual rails due to customer requests we have received. The rail length can be designated at units of 1 mm.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  Consegna da ：	7 giorni

• 

  Guide profilate / carrello largo, carrello extra largo / SBI-FL, SBI-FLL

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  Consegna da ：	10 giorni

• 

  Carrello / carrello largo, dimensioni del carrello selezionabili / SHW

  THK

  An individual block from the THK LM guide SHW series. Extremely useful for sudden design changes and when performing maintenance.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	125.20 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Carrello / carrello largo, dimensioni del carrello selezionabili / materiale selezionabile / cuscinetto a ricircolo di sfere / HRW

  THK

  An individual block from the THK LM guide HRW series. Extremely useful for sudden design changes and when performing maintenance.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	104.99 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Guide profilate / guida larga / carrello largo / materiale selezionabile / SHW

  THK

  A structure with a wide rail width and low center of gravity. SHS It is advantageous when there are Mc moment requirements and is thin compared with.
  
  [Features]
  · A highly rigid LM guide that is capable of superior high speeds, maintenance-free over long periods of time, and having low noise due to the adoption of a ball retainer.
  · The SHW, which has a structure with a width LM rail width and a low center of gravity, is ideal for use in locations where there are space limitations, and when there are MC moment rigidity requirements.
  · Each of the rail rows has been arranged in an array at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and can be used for a wide range of application.
  · The self-aligning capability achieved from the unique circular arched-groove front face combination (DF set) makes it possible to absorb the mounting error even when there is a preload incurred, and it is also capable of obtaining a smooth linear motion at a high accuracy.
  · The ball retainers eliminate the mutual friction between the balls and holds the lubricant oil (agent) to achieve superior low-dust performance.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  Consegna da ：	19 giorni

• 

  * Sistema a ricircolo di sfere con fermo conforme ai nuovi standard [3 / 5 giorni di spedizione] con guida LM conforme agli standard mondiali, modello SHS

  THK

  A best selling THK product. The SHS series can be used in any position.
  *When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
  (Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
  Please place your orders in this manner.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  Consegna da ：	7 giorni

• 

  Carrello / dimensioni del carrello selezionabili / materiale selezionabile / SSR

  THK

  An individual block from the THK LM guide SSR series. Extremely useful for sudden design changes and when performing maintenance.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · This ball retainer has been adopted which has eliminated mutual friction between balls and also improves the holding power of the grease.
  · , which makes it possible to be maintenance-free over a long term, have a long life, have excellent high speed, and low noise.
  · Compact / radial type: A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	51.04 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Pattino a sfere / acciaio / SKS / R1666

  BOSCH REXROTH

  • Sconto volumi elevati

  Dati CAD disponibili in formato 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	63.79 €
  Consegna da ：	70 giorni

  *Prezzo unitario in configurazione base

• 

  Guide profilate / dimensioni del carrello selezionabili / precisione / materiale selezionabile / SSR

  THK

  Radial type that is strong against loads in the radial direction. More advantageous than SHS when incurring loads in the radial direction (longevity, precision, rigidity, etc.). A stainless steel type not featured with the SHS is also available.
  *When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
  (Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
  Please place your orders in this manner.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  Consegna da ：	19 giorni

• 

  Guida LM con sistema a ricircolo di sfere completo, radiale, SR-M1

  THK

  High temperature specifications that can be used in maximum temperatures of 150°C, and the grease can also be used in high temperature environments. Has low rolling resistance fluctuation in response to changes in temperature and a dimension consistency treatment has been applied, which has provided excellent dimensional consistency.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  › Configura ora
  Consegna da ：	35 giorni

• 

  Carrello / dimensioni del carrello selezionabili / materiale selezionabile / ricircolo di sfere / SR

  THK

  An individual block item from the THK LM guide SR series. Extremely useful for sudden design changes and when performing maintenance.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled
  · in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.
  · Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
  · Compact / radial type: A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	46.67 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Binari profilati / dimensioni dei binari selezionabili / SR

  THK

  We have started selling individual rails due to customer requests we have received. The rail length can be designated at units of 1 mm.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.
  · Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
  · A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.
  · Palm of the two shafts

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  Consegna da ：	7 giorni

• 

  Guide profilate / carrello lungo / SBI-CL, SBI-CLL

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  Consegna da ：	9 giorni

• 

  * Sistema a ricircolo di sfere completo conforme ai nuovi standard [3 / 5 giorni di spedizione] con guida LM conforme agli standard mondiali, modello HSR

  THK

  A best selling THK product. The HSR series can be used in any position.
  *When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
  (Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
  Please place your orders in this manner.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  Consegna da ：	7 giorni

• 

  Binari profilati / binari larghi, dimensioni dei binari selezionabili / materiale selezionabile / HRW

  THK

  We have started selling individual rails due to customer requests we have received. The rail length can be designated at units of 1 mm.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · The ball will not fall out even if the LM rail is removed because it is held by a holding plate. (Excludes the HRW12 and 14LR types) each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) where there is action on the M block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  Consegna da ：	19 giorni

• 

  Guide profilate / carrello lungo / SBI-HL, SBI-HLL

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  Consegna da ：	10 giorni

• 

  Guida LM con sistema a ricircolo di sfere completo, elevata resistenza alle alte temperature in conformità con gli standard internazionali, HSR-M1

  THK

  High temperature specifications that can be used in maximum temperatures of 150°C, and the grease can also be used in high temperature environments. Has low rolling resistance fluctuation in response to changes in temperature and a dimension consistency treatment has been applied, which has provided excellent dimensional consistency.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used from any position.
  · The LM guide for use in high temperatures can be used in even higher temperatures of up to 150°C as a result of using a unique technology for the materials, heat treatment, and lubricant.
  · Can now be used in temperatures of up to 150°C by using stainless steel end rails and end rails that utilize rubber materials for use in high temperatures.
  · A dimensional consistency treatment has been applied to achieve excellent dimensional consistency after applying heat or cooling (may thermally expand under high temperatures).
  · The LM block, LM rail, and balls all use stainless steel with excellent corrosion resistance, which is ideal for use in clean rooms.
  · Uses a grease for use in high temperatures with limited rolling resistance fluctuations resulting from grease even when the temperature fluctuates from a normal temperature to a high temperature.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  › Configura ora
  Consegna da ：	19 giorni

• 

  Sistema a ricircolo di sfere con guida LM, miniaturizzata, SRS

  THK

  A best selling THK product. The SRS series is designed for installation to locations in which space is at a premium.
  *When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
  (Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
  Please place your orders in this manner.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  Consegna da ：	7 giorni

• 

  Binari profilati / dimensioni dei binari selezionabili / materiale selezionabile / SSR

  THK

  No need to fret over delivery because the THK LM guide ships in three days. We have started selling individual rails due to customer requests we have received. The rail length can be designated at units of 1 mm.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  Consegna da ：	7 giorni

• 

  Guide profilate / guida larga, dimensioni della guida selezionabili / SHW

  THK

  We have started selling individual rails due to customer requests we have received. The rail length can be designated at units of 1 mm.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  Consegna da ：	19 giorni

• 

  Guide profilate / carrello largo e corto / SBI-FV

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  Consegna da ：	10 giorni

• 

  Guide profilate / carrello piccolo / SBI-SV

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  Consegna da ：	10 giorni

Loading...