ASAHI SEIKO Supporti dritti（Gruppo cuscinetto, tipo：Supporto dritto）
| Giorni spedizione |
|
|---|
?* Informazioni su tempi di consegna e prezzi
-
Unitá di supporto con cuscinetto tipo UP serie argento foro cilindrico con ruota eccentrica
ASAHI SEIKO
[Features]
· Smaller and more lightweight than conventional insert bearing units.
· Also, the bearing box is marked with a center mark for easy positioning.- Sconto volumi elevati
A partire da∗ ： 14.30 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Viti di fermo
ASAHI SEIKO
Standard model number. Bearing box with a sturdy integrated structure and inserted bearing. Used with a wide range of transmission equipment. Cast iron series
[Features]
· Logical steel center: The outer wheel's outer diameter is machined into a ball surface, fitting around the center of a bearing box machined in the same way. Because both of the spherical surfaces can be aligned, this ensures logical operation of the machinery and stops erratic shaft center behavior, preventing excessive force from being applied to the bearing due to complications.
· Supply method: Simply supply fresh grease at arbitrary intervals and ensure that the bearing internal workings are ejecting old grease to the exterior as much as possible to extend working life for both grease supplies and the bearing. The cast iron series comes standard with a supply method to ensure that it can be used in severe conditions for long periods of time with complete confidence.
· Excellent sealing equipment: The bearing is double-sealed with a steel plate slinger and a heat-resistant synthetic rubber seal. Friction is low and even if the shaft tilts the seal contact is unchanged. The result is an extremely effective seal that prevents both grease leaks and contamination of the interior by external trash and moisture. Can be used with confidence even extremely poor conditions.
· This insert bearing unit with a cover can be used with confidence in poor environmental conditions such as factories engaged in steel manufacturing, milling, cement making, and casting, and in machinery for aircraft, air conditioning, and public works. The advance receiving box for units with set screws and adapters included has a steel plate or cast iron cover mounted for dust prevention, and both the bearing and the bearing box are processed with sealing equipment to improve dust-proof properties.
· Deep groove shaped internal structure: The bearing interior is identical to the deep groove ball bearing structure of the 6200 and 6300 shape. For this reason, it can support both radial and axial loads and is low noise.
· Bearing and bearing box compatibility: Because the bearing and bearing box have mutual compatibility, the bearing can be replaced on its own as necessary, which is extremely convenient.
· Easy handling: The insert bearing unit is an integrated combination of a bearing and bearing box. The bearing is preloaded with an appropriate amount of high quality lubricant grease, so it can be operating immediately as is after mounting. For this reason, there is no concern of contaminants and other materials entering the bearing during handling, preventing trouble during mounting before it occurs.
· Simple mounting to the shaft: The insert bearing unit can be mounted to the shaft on the side of the inner ring with the two included hex socket head set screws, to the inner ring using the included mounting adapter for the tapered hole in the inner diameter, or mounted with the included eccentric wheel. All of these methods are simple procedures, and the shaft machining is easy.- Sconto volumi elevati
- Stock
A partire da∗ ： 13.86 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Supporto dritto, foro cilindrico con viti di fermo, tipo UCPH
ASAHI SEIKO
Pillow-type unit UCP200-type bearing box with raised center height.A partire da∗ ： 23.54 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Supporto dritto in lamiera di acciaio, foro cilindrico con viti di fermo, tipo BPP
ASAHI SEIKO
Combines a built-in bearing with a rubber seal in a simple double steel plate bearing box structure, making it suitable for a transmission shaft with a relatively light load and medium to low speed.A partire da∗ ： 13.31 € Consegna da ： 5 giorni *Prezzo unitario in configurazione base
-
Viti di fermo
ASAHI SEIKO
[Features]
· Although the bearing box is a standard pillow shape, it is smaller and more lightweight than conventional insert bearing units.
· Also, the bearing box is marked with a center mark for easy positioning.
· The fixation method for the bearing box and shaft is the set screw method.- Sconto volumi elevati
A partire da∗ ： 14.41 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Supporto dritto, foro cilindrico con viti di fermo, tipo UCPA
ASAHI SEIKO
A more compact bearing box than the pillow-type unit UCP200 type, with screw holes for mounting to suit areas with space restrictions.A partire da∗ ： 21.76 € Consegna da ： 5 giorni *Prezzo unitario in configurazione base
-
Supporto cuscinetto Serie argento modello con foro cilindro con ruota eccentrica
ASAHI SEIKO
The bearing, fixed eccentric wheel, and bearing box are all made of corrosion-resistant stainless steel, making the product suitable for use with machinery that doesn't handle rust well.
[Features]
· Logical steel center: The outer wheel's outer diameter is machined into a ball surface, fitting around the center of a bearing box machined in the same way. Because both of the spherical surfaces can be aligned, this ensures logical operation of the machinery and stops erratic shaft center behavior, preventing excessive force from being applied to the bearing due to complications.
· Supply method: Simply supply fresh grease at arbitrary intervals and ensure that the bearing internal workings are ejecting old grease to the exterior as much as possible to extend working life for both grease supplies and the bearing. The cast iron series comes standard with a supply method to ensure that it can be used in severe conditions for long periods of time with complete confidence.
· Excellent sealing equipment: The bearing is double-sealed with a steel plate slinger and a heat-resistant synthetic rubber seal. Friction is low and even if the shaft tilts the seal contact is unchanged. The result is an extremely effective seal that prevents both grease leaks and contamination of the interior by external trash and moisture. Can be used with confidence even extremely poor conditions.
· This insert bearing unit with a cover can be used with confidence in poor environmental conditions such as factories engaged in steel manufacturing, milling, cement making, and casting, and in machinery for aircraft, air conditioning, and public works. The advance receiving box for units with set screws and adapters included has a steel plate or cast iron cover mounted for dust prevention, and both the bearing and the bearing box are processed with sealing equipment to improve dust-proof properties.
· Deep groove shaped internal structure: The bearing interior is identical to the deep groove ball bearing structure of the 6200 and 6300 shape. For this reason, it can support both radial and axial loads and is low noise.
· Bearing and bearing box compatibility: Because the bearing and bearing box have mutual compatibility, the bearing can be replaced on its own as necessary, which is extremely convenient.
· Easy handling: The insert bearing unit is an integrated combination of a bearing and bearing box. The bearing is preloaded with an appropriate amount of high quality lubricant grease, so it can be operating immediately as is after mounting. For this reason, there is no concern of contaminants and other materials entering the bearing during handling, preventing trouble during mounting before it occurs.
· Simple mounting to the shaft: The insert bearing unit can be mounted to the shaft on the side of the inner ring with the two included hex socket head set screws, to the inner ring using the included mounting adapter for the tapered hole in the inner diameter, or mounted with the included eccentric wheel. All of these methods are simple procedures, and the shaft machining is easy.A partire da∗ ： 44.40 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
| Marchio |
|---|
| Serie prodotto |
| A partire da∗ |
| Consegna da ： |
| Specifiche |
| Unità, tipo |
| Gruppo cuscinetto, tipo |
| Diam. foro albero d(Ø) |
| Materiale corpo unità |
| Profilo diam. interno cuscinetto |
| Con supporto dritto, categoria |
| Materiale elemento di rotolamento |
| Trattamento superficie |
|
|
|
|
|
|
| |
| Marchio | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO |
| Serie prodotto | Unitá di supporto con cuscinetto tipo UP serie argento foro cilindrico con ruota eccentrica | Supporto dritto, foro cilindrico con viti di fermo, tipo UCPH | Supporto dritto in lamiera di acciaio, foro cilindrico con viti di fermo, tipo BPP | Supporto dritto, foro cilindrico con viti di fermo, tipo UCPA | Supporto cuscinetto Serie argento modello con foro cilindro con ruota eccentrica | ||
| A partire da∗ | 14.30 € *Prezzo unitario in configurazione base Sconto volumi elevati | 13.86 € *Prezzo unitario in configurazione base Sconto volumi elevati | 23.54 € *Prezzo unitario in configurazione base | 13.31 € *Prezzo unitario in configurazione base | 14.41 € *Prezzo unitario in configurazione base Sconto volumi elevati | 21.76 € *Prezzo unitario in configurazione base | 44.40 € *Prezzo unitario in configurazione base |
| Consegna da ： | Stesso giorno | Stesso giorno | Stesso giorno | 5 giorni | Stesso giorno | 5 giorni | Stesso giorno |
| Specifiche |
| ||||||
| Unità, tipo | Gruppo cuscinetto | Gruppo cuscinetto | Gruppo cuscinetto | Gruppo cuscinetto | Gruppo cuscinetto | Gruppo cuscinetto | Gruppo cuscinetto |
| Gruppo cuscinetto, tipo | Supporto dritto | Supporto dritto | Supporto dritto | Supporto dritto | Supporto dritto | Supporto dritto | Supporto dritto |
| Diam. foro albero d(Ø) | 10 ～ 30 | 12 ～ 140 | 12 ～ 50 | 12 ～ 35 | 10 ～ 30 | 12 ～ 50 | 10 ～ 30 |
| Materiale corpo unità | Altro | Ghisa | Ghisa | Acciaio | Altro | Ghisa | Altro |
| Profilo diam. interno cuscinetto | Foro cilindrico, ghiera eccentrica | Foro cilindrico, vite di fermo | Foro cilindrico, vite di fermo | Foro cilindrico, vite di fermo | Foro cilindrico, vite di fermo | Foro cilindrico, vite di fermo | Foro cilindrico, ghiera eccentrica |
| Con supporto dritto, categoria | Per impieghi leggeri | Standard | Centro alto | Standard | Standard | Standard | Per impieghi leggeri |
| Materiale elemento di rotolamento | Acciaio inox | Acciaio inox | Acciaio inox | Acciaio | Acciaio inox | Acciaio inox | Acciaio inox |
| Trattamento superficie | Non in dotazione | Non in dotazione | Non in dotazione | Non in dotazione | Non in dotazione | Non in dotazione | Non in dotazione |
Loading...
Seleziona per:
Stock
-
- Stock Items Included
Limitare la ricerca specificando Spec./Dim.
-
Unità, tipo
-
Gruppo cuscinetto -
Cuscinetto di supporto
-
-
Gruppo cuscinetto, tipo
-
Supporto dritto -
Con flangia quadrata -
Con flangia a rombo
-
-
Diam. foro albero d(Ø)
- 8
- 10
- 12
- 12.7
- 15
- 15.875
- 17
- 19.05
- 19.05 - 30
- 20
- 22.225
- 22.225 - 35
- 23.812
- 23.813
- 25
- 25.4
- 28.575
- 28.575 - 40
- 30
- 30.162
- 30.163
- 31.75
- 31.75 - 50
- 33.34
- 34.925
- 34.93
- 35
- 36.512
- 36.513
- 36.513 - 45
- 36.513 - 55
- 38.1
- 40
- 41.275
- 41.275 - 60
- 42.862
- 44.45
- 45
- 47.625 - 65
- 50
- 50.8
- 53.975 - 75
- 55
- 55.562
- 55.563
- 55.563 - 80
- 57.15
- 60
- 61.913
- 61.913 - 90
- 63.5
- 65
- 68.262
- 68.263
- 70
- 74.613
- 74.613 - 85
- 74.613 - 100
- 75
- 79.375 - 90
- 80
- 82.55
- 85
- 87.313
- 87.313 - 120
- 90
- 95
- 100
- 105
- 110
- 114.3
- 115
- 120
- 125
- 130
- 131.763
- 138.113
- 140
-
Materiale corpo unità
- Ghisa
- Acciaio inox
- Piastra in acciaio
- Acciaio da costruzione
- Resina
- Altro
- Acciaio
-
Profilo diam. interno cuscinetto
-
Foro cilindrico
-
Foro cilindrico, vite di fermo
-
Foro cilindrico, ghiera eccentrica
-
Foro conico
-
Foro conico, adattatore
-
Foro cilindrico
-
Con supporto dritto, categoria
-
Standard
-
Spessore elevato
-
Centro alto
-
Larghezza ridotta
-
Per impieghi leggeri
-
Standard
-
Materiale elemento di rotolamento
-
Trattamento superficie
Limitare la ricerca specificando il produttore
-
- MISUMI (5)
- INA (17)
- SKF (17)
- NIPPON PILLOW BLOCK (11)
- NTN (10)
- ASAHI SEIKO (7)
- FSBEARING (4)
- TOHO (0)
- SNR (0)
- TIMKEN (0)
- ZEN (0)
- FAG BEARINGS (0)
Limitare la ricerca specificando Tipo dati CAD
-
- 2D
- 3D
Categorie collegate a Supporti dritti
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.