Attacchi a innesto rapido（Montaggio a vite, direzione：Gomito pagina 2）

?* Informazioni su tempi di consegna e prezzi

• • In Offerta

  

  connettore tupo generico modellolo mini gomiti

  NIHON PISCO

  Volume successfully reduced by 40% compared with standard type.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	2.66 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  connettore tupo generico modellolo mini gomiti lunghi

  NIHON PISCO

  [Features]
  · Ultra-small one-touch fitting for general pneumatic pipes.
  · Reduced size with a volume ratio of 40% over the standard type.
  · Elliptical release ring allows easy tube release.
  · The φ1.8 mm type is an industry-first minimum one-touch type.
  · Optimum for piping of small actuators and such.
  · Light gray types, and clean room packaged types available as options.
  · Clean room packaging specifications define the use of fluorinated grease.
  · After purification with clean air, the item is package in an ISO Class 6-equivalent clean room that has been purified with clean air.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	3.75 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  connettore tupo generico modellolo mini set vite esagono incassato gomiti universali

  NIHON PISCO

  40% less volume than the standard type.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	5.38 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Raccordi a gomito per tubi antistatici

  NIHON PISCO

  Optimal for lines requiring static electricity dissipation and anti-static properties.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	3.59 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  connettori per tubi resistenti agli spruzzi - gomito

  NIHON PISCO

  [Features]
  · Flame-retardant resin is used.
  · Sputter resistance property (spark) is superior (V-0 equivalent*).
  · *UL94 V-0: Standard enacted by an American private test institution (established by an American fire underwriter) which ranks self-extinguishing materials based on four levels: V-0, V-1, V-2, and HB, where V-0 is the most difficult rank to achieve.
  · Equipped with release ring cover.
  · Prevents operation failure of release ring caused by sputtering.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	3.61 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  connettori per tubi resistenti agli spruzzi - ottone gomito

  NIHON PISCO

  The main body and release ring are made of brass for superior flame retardancy and sputtering resistance.
  
  [Features]
  · Available sealing rubber materials include HNBR, FKM, and NBR.
  · Ideal for environments exposed to sparks.
  · Release ring made of brass offers excellent flame retardancy and sputter resistance.
  · The type with a cover prevents dust and sputter from getting through to the internal fittings.
  · An optional sputter cover prevents fine sparks from entering.
  · By using a release ring cover (CS – sold separately), sparks that penetrate through the gap between the release ring and the tube cannot get close.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	5.59 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  connettori per tubi resistenti agli spruzzi - ottone gomito senza cover

  NIHON PISCO

  The main body and release ring are made of brass for superior flame retardancy and sputtering resistance.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	5.85 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  connettori per tubi resistenti agli spruzzi - ottone gomito universale senza cover

  NIHON PISCO

  The main body and release ring are made of brass for superior flame retardancy and sputtering resistance.

  Dati CAD disponibili in formato 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	9.38 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  connettori per tubi resistenti agli spruzzi - ottone gomito universale senza cover

  NIHON PISCO

  The main body and release ring are made of brass for superior flame retardancy and sputter resistance.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	8.61 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  connettori a gomito resistenti a corrosione in SUS316

  NIHON PISCO

  All metal parts and materials use SUS316 to provide excellent rust resistance.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	26.92 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  connettori per acciaio resistente a corrosione SUS304 gomito

  NIHON PISCO

  If strength is required, optimal for chemical atmospheres.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	34.80 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  connettori per equivalente SUS303 ressitente a corrosione gomito

  NIHON PISCO

  No copper-based metal used. Optimal for handling low concentrations of ozone.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	13.40 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettori raffreddamento stampi Controllo temperatura stampi Valvola stop incorporata con accoppiamento One-touch, gomito

  NIHON PISCO

  One-touch fittings for mold cooling. No protrusions remain on the die after the plug is removed.
  
  [Features]
  • One-touch fittings for mold cooling.
  • The usable fluid includes 3 types: heating medium oil, (fresh) water and air.
  · No protrusions remain on the die after the plug is removed.
  · Built-in type stop valve prevents warm water outflow when the plug is attached or removed.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	28.76 €
  Consegna da ：	12 giorni

  *Prezzo unitario in configurazione base

• 

  Presa a gomito per giunti ad attacco rapido per controllo di raffreddamento stampi

  NIHON PISCO

  One-touch fitting for mold cooling. No projections remain on the die after the plug is removed.
  
  [Features]
  · One-touch fitting for mold cooling.
  · Working fluids include 3 types: thermal oil, (fresh) water and air.
  · No protrusion on the mold remains after the plug is removed.
  · Stop valve built-in type prevents warm water outflow when the plug is attached or removed.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	12.78 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Giunti ad attacco rapido Modello standard gomito a 90°

  TAIYO

  A compact, single-touch fitting. Does not require sealing tape.
  
  [Features]
  · No tools required for mounting and removing the tube.
  · The new lock ring enables easier and more secure piping work.
  · The threaded part has been sealed with a fluoropolymer resin coating. This helps reduce costs by eliminating the need for sealing tape and by reducing the number of processes.
  ▪ Improved corrosion resistance and flame retardancy: The product uses flame-retardant PBT resin (polybutylene terephthalate) for the plastic sections. Helps prevent the spread of fire with the fittings, even in environment that are exposed to sputtering welding sparks.
  ▪ The brass metal parts have been plated with nickel, helping improve the appearance and corrosion-resistance properties of the product.
  ▪ Maintains a high airtight seal: Reduces the tube's manipulation force and uses a new form of ring packing which helps maintain its high air tight seal.
  ▪ Space saving M type: The width across flats dimensions of the hexagonal type are smaller than the standard F type. The mounting pitch can be made smaller when mounting in parallel.
  ▪ Hence, mounting in narrow spaces is easy.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	4.31 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Connettore a contatto Five Maschio a gomito

  CHIYODA TSUSHO

  Lightweight, one-touch fitting with a flame-retardant resin. Male elbows.
  
  [Features]
  · Unnecessary parts have been eliminated and the sizes of remaining parts have been minimized to achieve the ultimate cost performance.
  · Further weight reduction achieved by making body parts all resin.
  · Utilized a new lock ring to achieve a joint function to perform piping work more smoothly and securely.
  · Used new packing to reduce the connecting operation force while maintaining high airtightness.
  · The model identifiers have been inscribed on products using an all-item laser marking process.
  · A standard, flame-retardant resin has been adopted.
  · Screw part sealing (R screw): Can be used for piping as-is because the threaded part has been sealed.
  · The body and screw parts of elbows can rotate.
  　*This is not a rotary type. Note that all-resin types do not rotate.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	1.53 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Connettore rapido Five Singolo Banjo

  CHIYODA TSUSHO

  A low-weight, one-touch fitting with a flame retardant resin. Single banjo.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	4.19 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore Touch gomito maschio Five Long

  CHIYODA TSUSHO

  Low-weight, One-Touch fitting with a flame retardant resin. Long male elbow.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	3.64 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore a contatto Five Maschio a gomito

  CHIYODA TSUSHO

  Stainless steel one-touch fitting with improved strength and corrosion resistance. Male Elbows.
  
  [Features]
  · Improved strength and corrosion resistance.
  · Prevents elution of metal ions such as copper and zinc.
  · Component corrosion prevention for industrial piping (de-zincification corrosion): improved performance via use of SUS303 for the metal portion of the main body.
  · Inherits the high performance of the touch connector five: inherits the performance of touch connector five as-is.
  · Upper threading flexibility: the elbow and branch tee part body and thread elements can be rotated.
  · Not a rotary type.
  · No attempt was made to seal the threaded part given concerns regarding clean piping.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	11.89 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Connettore a contatto FUJI Maschio a gomito

  CHIYODA TSUSHO

  A one-touch fitting with a rotation locking ring to prevent from turning and breaking. A male elbow with a body manufactured from metal or resin.
  
  [Features]
  · All-metal type fittings demonstrate excellent strength under tough conditions. The resin body type fittings are lightweight.
  · Pipes connected to different machines can be easily identified by attaching display rings (sold separately).
  · A rotating locking ring type for preventing full rotation of the tubes.
  · The threaded section has been seal processed—enabling pipes to be used directly.
  · The body and thread section of the elbows and branch tee are rotatable.
  · *This is not a rotary type fitting.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	3.00 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Connettore a contatto maschio FUJI Lungo a gomito

  CHIYODA TSUSHO

  [Features]
  · One-touch fitting with rotation lock ring that prevents full rotation of the tube.
  · Long male elbow with a body available in metal and plastic.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	4.25 €
  Consegna da ：	10 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore rapido FUJI Singolo Banjo

  CHIYODA TSUSHO

  One-touch fittings with a rotation lock ring to prevent rotation out of the tube. Single banjo; select from a metal or plastic body. Branch type also available.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	4.81 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore a contatto mini Maschio a gomito

  CHIYODA TSUSHO

  Ultra-compact one-touch fitting useful for reducing space occupied by piping. Male elbow.
  
  [Features]
  · Ultra-small, reducing piping space.
  · Electro-less nickel plating, which provides superior corrosion resistance properties, is used.
  · A hex recess type male connector (straight) is used to save space.
  · Rotation lock ring prevents full rotation of the tube.
  · The body and screw elements of the elbows and branch tees can rotate.
  · *Not a rotary type.
  · Screw element sealing (R screw): Can be used for piping as-is due to screw element sealing

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	3.24 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Connettore a contatto Connettore a gomito

  CHIYODA TSUSHO

  A vacuum-compatible one-touch fitting that boasts great drawing strength and durability. Elbow connector selectable from metal and resin.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	6.47 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Connettore rapido lungo a gomito

  CHIYODA TSUSHO

  A vacuum-compatible one-touch long elbow fitting with good drawing strength and durability. Select from a metal or plastic body.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	7.97 €
  Consegna da ：	10 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore rapido Modello FUJI H Singolo Banjo

  CHIYODA TSUSHO

  A single banjo with sturdy metal finish. Optimal for environments with sparks.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	8.99 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore a contatto maschio Modello H FUJI forgiato a gomito

  CHIYODA TSUSHO

  A cast male elbow with sturdy metal exterior.

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	8.68 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Connettore a contatto Modello H Connettore a L

  CHIYODA TSUSHO

  A one-touch fitting with high pull-out strength and durability. Metal elbow connector.
  
  [Features]
  · Utilizes a special locking ring to provide maximum pull-out force and durability for this one-touch fitting.
  · The O-ring has been replaced with a Viton® packing seal to support high temperatures. Optimally suited to P flexible piping (please install an OF, such as CKN-6-01-H-OF, at the end).
  · To insert multilayered tubing, peel off the outer section and install the one-touch coupling.
  · The life of the tube can be increased significantly by fitting a standard metal cap to prevent exposure of the inner tube.
  · All-metal types have exceptional strength under tough conditions.
  · Thread section sealing (R thread): The thread section is sealed. Therefore, the fitting can be used directly for piping.
  · The body and thread section of the elbows and branch tee are rotatable.
  · *This is not a rotary type fitting.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	8.06 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Connettore rapido Modello Five H Singolo Banjo

  CHIYODA TSUSHO

  Single banjo that shuts out sputtering.

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	10.18 €
  Consegna da ：	10 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore Touch Five H modello lungo a gomito maschio

  CHIYODA TSUSHO

  Long male elbow to shut out sputtering.

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	9.94 €
  Consegna da ：	10 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore a contatto FUJI Modello H Maschio a gomito

  CHIYODA TSUSHO

  A male elbow with a sturdy metal exterior ideal for environments where sparks are generated.
  
  [Features]
  · All-metal types and resin body types available.
  · All-metal types have excellent strength under tough conditions, while the resin body types are lightweight.
  · Pipes connected to different machines can be identified easily when display rings (sold separately) are attached.
  · Rotation lock ring type, preventing full rotation of tube.
  · Screw part sealing (R screw): Can be used for piping as-is because the threaded part has been sealed.
  · The body and screw parts of elbows and branch tees can rotate.
  · *This is not a rotary type.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	6.13 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  ChemiFit Serie C1S Gomito a 90° EL-CS1

  NITTA

  [Features]
  · A completely oil-free processed product — parts are washed and assembled in a cleanroom. No oil or grease is used even for the sealing material.
  · The tube is connected by a PushOne® fitting: No jigs nor tools are required for connecting the tube.
  · The thread section is made of SUS304 for superior strength.
  · Double clean packaging: Each item is packed individually in a cleanroom and then packaged inside a zip-seal bag.
  · The main body and thread section rotate. The orientation of the elbow, tee, etc., can be decided when connecting the tubes.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	17.93 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  ChemiFit Serie C1 Gomito a 90° EL-C1

  NITTA

  90° Elbow EL-C1 is treated with a process that uses absolutely no oil. Parts are cleaned and assembled in clean rooms. No oil or grease is used even for the sealing material.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	6.63 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  JUNRON giunti ad attacco rapido serie M (per tubazioni generiche) Gomito

  JUNKOSHA

  [Features]
  · Electroless nickel plating is as standard applied to metal parts.
  · The nickel plating in all brass parts of M series nipples and plastic bodies is standardized.
  · Color seal for seal identification.
  · Each of the different types of R (PT) screws is coated with a different colored seal so they can be identified at a glance (PAT.NO.1820889).
  · You can position the body in accordance with the removing direction of the tube.
  ・R (PT) screw parts of elbow/Tee and the resin joint part rotate allowing for free positioning according to the retrieval direction of the tube after the fitting has been mounted. Moreover, the screw can be tightened while the resin part is fixed.
  ▪ The tube grip comes with a rotating mechanism.
  ▪ The tube grip rotates smoothly in the fitting thus preventing the turning of the tube.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	3.61 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  JUNRON giunti ad attacco rapido serie M (per tubazioni generiche) Gomito 45°

  JUNKOSHA

  [Features]
  · Electroless nickel plating is applied to metal parts as standard.
  · The nickel plating on all brass components of the M Series nipples and the plastic bodies have been standardized.
  · Colored seals for seal identification.
  · Each of the different types of R (PT) threads are coated with a different colored seal so they can be identified at a glance (PAT. NO 1820889).
  · The body can be positioned in accordance with the withdrawal direction of the tube.
  · The R (PT) threads of the elbow/tee and the resin joint sections rotate. This allows for free positioning in accordance with the withdrawal direction of the tube after the fitting has been mounted. In addition, the screw can be tightened while the resin part is fixed in position.
  · The tube grip is equipped with a rotating mechanism.
  · The tube grip rotates smoothly inside the fitting, which prevents the tube from turning and breaking.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	3.83 €
  Consegna da ：	10 giorni

  *Prezzo unitario in configurazione base

• 

  JUNRON Accoppiamento ad attacco rapido Serie M (Uso per tubature) Gomito lungo

  JUNKOSHA

  [Features]
  · Electroless nickel plating is applied to metal parts as standard.
  ▪ It is available with colored seals based on the screw type.
  ▪ The body can be set in accordance with the direction in which the tube is removed.
  ▪ The tube grip comes with a rotating mechanism.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	6.75 €
  Consegna da ：	10 giorni

  *Prezzo unitario in configurazione base

• 

  JUNRON giunti ad attacco rapido serie M (per saldatrice a punti per tubazioni) gomito

  JUNKOSHA

  Nonflammable. Superior body strength and impact resistance. The tube grip is equipped with a rotating mechanism. All the sealing materials are water resistant NBR. No sealing tape is required. The R (PT) threads and resin connecting parts rotate.
  
  [Features]
  · All the resin sections conform to the UL94V-0 flame retardant rating.
  · The pull-out strength of the R (PT) thread resin press-fit part has been improved in comparison to conventional parts.
  · The shock resistance has been significantly improved by a new mechanism tube grip.
  · The tube clip rotates smoothly inside the fitting and prevents tube from breaking due to rotation of the tube.
  · NBR is used in the water-resistant O-ring and V-seal.
  · The R (PD) threads are sealed. Therefore, wrapping the threads with sealing tape is not required.
  · The combined part of the R (PT) thread of elbow tee and resin part can be rotated. After connecting, tube-piping direction can be freely implemented and the threads can be tightened even while the resin part is fixed.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	3.77 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  JUNRON giunti ad attacco rapido serie M (per saldatrice a punti per tubazioni) gomito lungo

  JUNKOSHA

  Nonflammable. Superior body strength and impact resistance. The Tube Grip comes with a rotating mechanism. All the sealing material is water-resistant NBR. No need for sealing tape. The R (PT) thread part and resin connection part rotate.
  
  [Features]
  · All the plastic portion conforms to UL94V-0 flame-retardant rating.
  · The burst strength of the R (PT) resin press fit part is 30% stronger than that of conventional parts.
  · Shock resistance has improved tremendously thanks to a new mechanism for the tube grip.
  · The tube grip rotates smoothly in the fitting and prevents the tube breaking due to rotation of the tube.
  ▪ Water-resistant O-ring and V-seal use NBR.
  ▪ R (PT) screw part is already sealed, hence no sealing tape is required.
  ▪ The combination of the R (P) screw part of the elbow tee and resin part can be rotated; after setting, the tube-piping direction can be freely adjusted and the screw part can be tightened even if the resin part is fixed.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	8.18 €
  Consegna da ：	12 giorni

  *Prezzo unitario in configurazione base

• 

  JUNRON giunti ad attacco rapido serie M (per saldatrice a punti per tubazioni) gomito 45°

  JUNKOSHA

  Non-flammable. Superior body strength and impact resistance. The tube grip comes with a rotating mechanism. All the sealing material is water resistant NBR. No need for sealing tape. The R (PT) thread part and resin connection part rotate.
  
  [Features]
  · Plastic portion conforms to UL94V-0 flame retardant rating.
  · The burst strength of the R (PT) resin press fit part is 30% stronger than that of conventional parts.
  · The shock resistance has improved tremendously thanks to a new tube grip mechanism.
  · The tube clip rotates smoothly in the fitting and prevents tube breakage due to rotation of the tube.
  · Water resistant O-ring and V-seal made of NBR.
  · R (PT) screw part is already sealed, hence sealing tape is not required.
  · The combined part of the R (PT) screw part of the elbow tee and the resin part can be rotated after setting, meaning the piping can be installed in any direction and the screw part can be tightened even if the resin part is fixed.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	3.67 €
  Consegna da ：	12 giorni

  *Prezzo unitario in configurazione base

• 

  Raccordo ad Inserimento rapido Serie A a gomito a 90°

  NITTA

  No jigs or tools are required for connecting tubes to this 90° elbow unit. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	9.45 €
  Consegna da ：	8 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Raccordo ad Inserimento rapido Serie A femmina con gomito a 90°

  NITTA

  No jigs or tools are required for connecting tubes to this 90° female elbow. The surface is resistant to degradation, preventing elution of copper ions.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	3.84 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Raccordo ad Inserimento rapido Serie A Gomito a 45°

  NITTA

  No jigs or tools are required for connecting tubes to this 45° elbow unit. The surface is resistant to degradation, preventing elution of copper ions.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	3.14 €
  Consegna da ：	8 giorni

  *Prezzo unitario in configurazione base

• 

  Gomito universale serie A One Push

  NITTA

  A universal elbow that does not require jigs or tools for connecting to tubes. Degradation of the surface is minimal. The elution of copper ions into the fluids is also prevented.
  
  [Features]
  · The tubes are PushOne® type fittings.
  · Requires no jigs or tools for connect to the tubes.
  · Electroless nickel plated.
  · Degradation of the surface is minimal. The elution of copper ions into the fluids is also prevented.
  · The white body brightens the working environment.
  · A flame-retardant PBT resin is utilized in the material.
  · A UL94 V-0 standard equivalent fitting with superior self-extinguishing properties.
  · This fitting is usable in spatter dispersion environments.
  · The R threads are sealed. Therefore, wrapping the threads with sealing tape is not required.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	4.31 €
  Consegna da ：	8 giorni

  *Prezzo unitario in configurazione base

• 

  Raccordo ad Inserimento rapido Serie E A gomito

  NITTA

  No jigs or tools are required for connecting tubes to this 45° elbow unit. The surface is resistant to degradation, preventing elution of copper ions.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	2.69 €
  Consegna da ：	8 giorni

  *Prezzo unitario in configurazione base

• 

  Raccordo ad Inserimento rapido Serie E gomito a 90°

  NITTA

  A 90-degree elbow that does not require jigs or tools for connecting to tubes. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.
  
  [Features]
  · The tubes are PushOne® type fittings.
  · Requires no jigs or tools for connect to the tubes.
  · An electrogalvanized product.
  · Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.
  · A flame retardant resin (UL94 V-0 standard EQUIV) is utilized.
  · A flame-retardant PBT resin is utilized in the material.
  · A UL94 V-0 standard fitting with superior self-extinguishing properties.
  · This fitting is usable in spatter dispersion environments.
  · The R threads are sealed. Therefore, wrapping the threads with sealing tape is not required.

  Dati CAD disponibili in formato 2D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	2.85 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

Loading...