GANTER Leve di serraggio
| Giorni spedizione |
|
|---|
?* Informazioni su tempi di consegna e prezzi
-
T-Handles, Aluminium
GANTER
T-Handles GN 563.2 can be used as either operating handles or for clamping purposes, producing high clamping forces.
T-Handles are produced using a stamping process which yields a high density material of high strength and a smooth surface.
An original ELESA-Design, produced in metal with permission of ELESA s. p. a.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 9.92 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Adjustable hand levers, Zinc die casting, threaded stud Stainless Steel
GANTER
Adjustable hand levers GN 300.1 are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 7.24 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Adjustable hand levers, Zinc die casting, with threaded stud steel
GANTER
Adjustable hand levers GN 300 are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 4.68 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Clamping levers with eccentrical cam, Lever Stainless Steel
GANTER
Clamping levers with eccentrical cam GN 927.5 with Stainless Steel-internal thread are used for rapid clamping and releasing operations. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
The lever has been designed to ensure that its movement cannot exceed the max. clamping position.
There are no loose components since they are all assembled and mounted in their correct order.
The salient points of type A are as follows:
The distance between the eccentrical cam and the contact surface is adjustable by means of a fine threaded knurled nut.
This allows the max. clamping force to be set by a simple adjustment. In addition this also allows the choice of the preferred lever position in relation to the clamping lever pin.
With these clamping levers with eccentrical cam GN 927.5, thrusts of up to 8 kN can be reached.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 11.70 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Safety tension levers, Steel
GANTER
Safety tension levers GN 312 are used on such applications where a thoughtless or mistaken releasing or re-positioning of the tension lever could lead to an accident.
The lever in its rest position is not connected with the internal spindle and can be rotated unhindered.
The tension lever engages in the serration only after pushing it down, thus allowing clamping or unclamping.
The "freewheel" position is re-established as soon as the handle is released.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 21.74 € Consegna da ： 5 giorni *Prezzo unitario in configurazione base
-
Leve manuali regolabili per ghiere di bloccaggio (GN 311)
GANTER
Per le ghiere di bloccaggio delle serie standard GN 706... e GN 707..., le leve manuali regolabili GN 311 sostituiscono la vite a esagono incassato DIN 912. Ciò consente di regolare facilmente e rapidamente le ghiere di bloccaggio senza l'ausilio di attrezzi. La tabella delle dimensioni delle ghiere di bloccaggio mostra la leva manuale corrispondente per la dimensione d1 della relativa ghiera di bloccaggio. Come per GN 706.4, le ghiere di bloccaggio semispaccate GN 706.2 generalmente vengono fornite con maniglie a ripresa.- Sconto volumi elevati
A partire da∗ ： 12.06 € Consegna da ： 7 giorni *Prezzo unitario in configurazione base
-
Leve manuali regolabili piatte, zinco a pressofusione, prigioniero filettato in acciaio inox
GANTER
- Sconto volumi elevati
A partire da∗ ： 4.70 € Consegna da ： 7 giorni *Prezzo unitario in configurazione base
-
Adjustable clamping levers, Steel
GANTER
Adjustable clamping levers GN 6337.3 have proved to be ideal whenever parts have to be clamped in a confined space or a particular lever position is required. The insert is connected by the lever via serrations in the ball bore which can be disengaged.
Pushing the lever down, disengages the serrations and the lever can be swivelled to the ideal clamping position. Engagement is achieved by releasing the lever.
Should a rotation of 360° not be possible, the insert can be lightly screwed in (after the lever is disengaged) via a slot in the knurled screw.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 15.18 € Consegna da ： 5 giorni *Prezzo unitario in configurazione base
-
Adjustable clamping levers, Steel
GANTER
Adjustable clamping levers GN 99.2 are known for their small dimensions.
They are for use in applications where either the clamping range is limited or where a specific lever position is required. The serrated bore in the spherical hub is fitted with a threaded bolt insert which engages in the hub with its own serrations.
By depressing the clamping lever the serrations are disengaged freeing it for re-positioning in the most convenient position. When releasing the lever the serrations will re-engage automatically.
Should a rotation of 360° not be possible the insert can be slightly screwed in (after the lever has been disengaged) by means of the slotted knurled screw.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 16.74 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Adjustable flat tension levers with tabbed bushing, Steel
GANTER
The overall height of flat tension levers GN 125 is reduced to a minimum.
As all other adjustable levers, they are ideal when-ever parts have to be clamped in a confined space, or a particular lever position is required. The threaded insert is connected with the hub via serrations which can be disengaged.
Pulling the lever, disengages the serrations and the lever can be swivelled to the ideal clamping position. On releasing the lever it will automatically re-engage.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 22.86 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Adjustable flat tension levers with tabbed stud, Stainless Steel
GANTER
The overall height of Stainless Steel-Flat tension levers GN 125.5 is reduced to a minimum.
As all other adjustable levers, they are ideal whenever parts have to be clamped in a confined space, or a particular lever position is required. The threaded insert is connected with the hub via serrations which can be disengaged.
Pulling the lever, disengages the serrations and the lever can be swivelled to the ideal clamping position. On releasing the lever it will automatically re-engage.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 33.74 € Consegna da ： 5 giorni *Prezzo unitario in configurazione base
-
Adjustable flat tension levers with threaded stud, Stainless Steel
GANTER
The overall height of Stainless Steel-Flat tension levers GN 125.5 is reduced to a minimum.
As all other adjustable levers, they are ideal whenever parts have to be clamped in a confined space, or a particular lever position is required. The threaded insert is connected with the hub via serrations which can be disengaged.
Pulling the lever, disengages the serrations and the lever can be swivelled to the ideal clamping position. On releasing the lever it will automatically re-engage.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 34.30 € Consegna da ： 5 giorni *Prezzo unitario in configurazione base
-
Adjustable flat tension levers with threaded stud, Steel
GANTER
The overall height of flat tension levers GN 125 is reduced to a minimum.
As all other adjustable levers, they are ideal when-ever parts have to be clamped in a confined space, or a particular lever position is required. The threaded insert is connected with the hub via serrations which can be disengaged.
Pulling the lever, disengages the serrations and the lever can be swivelled to the ideal clamping position. On releasing the lever it will automatically re-engage.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 23.08 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Adjustable hand levers with increased clamping force
GANTER
Adjustable hand levers GN 300.4 are produced with a clamping area which is linked via a thrust ball bearing to the bush and screw respectively of the clamping lever. This has led to the following advantages:
- Doubled clamping force through vastly reduced friction.
- There is no movement on the contact area between adjustable hand lever and component which greatly reduces any marking on the clamping area.
- In addition a reduced creep factor has been achieved by the increased preload.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 28.94 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Adjustable hand levers with special tipped threaded studs
GANTER
Adjustable hand levers GN 306 are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
Pulling the lever disengages the serrations, allowing it to be swivelled to the ideal clamping position. When the lever is released, the serrations
automatically re-engage.
The brass and plastic tipped studs (Types MS / KU) help to avoid damage to the work piece being clamped.
The hardened tipped stud (Type DZ) provides an oval point-shaped pressure point.
The swivel thrust pad (Type KD) can easily be snapped on and taken off.
Pad is supplied unmounted.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 8.08 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Adjustable hand levers, Internal parts Stainless Steel
GANTER
Adjustable hand levers GN 303.1 are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be dis-engaged.
The push button is a design element that offers an easy disengagement. Its use is limited to applications where dismantling of the lever for installation is not required.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 10.60 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Adjustable hand levers, straight lever
GANTER
Adjustable hand levers GN 302 have a straight lever, not inclined, being parallel to the clamping space.
Adjustable hand levers are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 5.64 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Adjustable hand levers, Zinc die casting
GANTER
Adjustable hand levers GN 303 are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be dis-engaged.
The push button is a design element that offers an easy disengagement. Its use is limited to applications where dismantling of the lever for installation is not required.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 7.74 € Consegna da ： 4 giorni *Prezzo unitario in configurazione base
-
Adjustable hand levers, Zinc die casting, bushing steel
GANTER
Adjustable hand levers GN 300 are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 4.60 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Adjustable hand levers, Zinc die casting, Bushing, Stainless Steel
GANTER
Adjustable hand levers GN 300.1 are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 7.24 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Adjustable Stainless Steel-Hand levers, threaded bushing
GANTER
Adjustable hand levers GN 300.5 with full Stainless Steel-Handle, correspond to applications where „agressive“ surrounding conditions are given, or where stainless steel materials are prescribed such as in food processing or chemical industry.
Retaining screws with hexagon head (Type AS) comply with the requirement "prevents water from accumulating".
Adjustable hand levers have proved to be ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 14.74 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Adjustable Stainless Steel-Hand levers, threaded bushing, electropolished
GANTER
Adjustable hand levers GN 300.6 with full Stainless Steel-Handle, correspond to applications where „agressive“ surrounding conditions are given, or where stainless steel materials are prescribed such as in food processing or chemical industry.
Retaining screws with hexagon head (Type AS) comply with the requirement "prevents water from accumulating".
Adjustable hand levers have proved to be ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 17.22 € Consegna da ： 5 giorni *Prezzo unitario in configurazione base
-
Adjustable Stainless Steel-Hand levers, threaded stud
GANTER
Adjustable hand levers GN 300.5 with full Stainless Steel-Handle, correspond to applications where "agressive" surrounding conditions are given, or where stainless steel materials are prescribed such as in food processing or chemical industry.
Retaining screws with hexagon head (Type AS) comply with the requirement "prevents water from accumulating".
Adjustable hand levers have proved to be ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 15.02 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Adjustable Stainless Steel-Hand levers, threaded stud, electropolished
GANTER
Adjustable hand levers GN 300.6 with full Stainless Steel-Handle, correspond to applications where "agressive" surrounding conditions are given, or where stainless steel materials are prescribed such as in food processing or chemical industry.
Retaining screws with hexagon head (Type AS) comply with the requirement "prevents water from accumulating".
Adjustable hand levers have proved to be ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 18.02 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Ball levers, Steel
GANTER
The official DIN standard sheet specifies additional sizes 200 - M24 / B24.- Sconto volumi elevati
A partire da∗ ： 9.78 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Clamp nuts with double lever, Steel
GANTER
Clamp nuts with double lever, Steel- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 6.40 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Clamp nuts, Steel
GANTER
Clamp nuts, Steel- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 3.50 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Clamping bolts, downward clamping, Stainless Steel
GANTER
Stainless Steel-Clamping bolts GN 918.7 have a circumferential wedge surface, allowing the rapid and safe clamping and releasing at a relatively large adjustable range and with high clamping force. Owing to the small pitch angle (wedge angle), the eccentric cam is self-arresting.
The ball lever is linked with the clamping bolt via a serrated ratchet, allowing the adjustment of the most suitable clamping position or the „readjustment“ of the handle.
Screw bolt and washer (see technical instructions) are matched to ensure that the clamping bolt can be easily turned after tightening. Using a washer requires no special requirements in terms of the threaded hole design. This means it can also be mounted on tables using T grooves.
Clamping bolts have the advantage that they can be turned after releasing in the clamping zone.
The use of GN 605 ball point screws with flattened ball is recommended in connection with the clamping bolts.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 82.30 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Clamping bolts, downward clamping, Steel
GANTER
Clamping bolts GN 918.2 have a circumferential wedge surface, allowing the rapid and safe clamping and releasing at a relatively large adjustable range and with high clamping force. Owing to the small pitch angle (wedge angle), the eccentric cam is self-arresting.
The ball lever is linked with the clamping bolt via a serrated ratchet, allowing the adjustment of the most suitable clamping position or the „readjustment“ of the handle.
Screw bolt and washer (see technical instructions) are matched to ensure that the clamping bolt can be easily turned after tightening. Using a washer requires no special requirements in terms of the threaded hole design. This means it can also be mounted on tables using T grooves.
Clamping bolts have the advantage that they can be turned after releasing in the clamping zone.
The use of GN 605 ball point screws with flattened ball is recommended in connection with the clamping bolts.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 45.40 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Clamping bolts, upward clamping, Stainless Steel
GANTER
Stainless Steel-Clamping bolts GN 918.6 have a circumferential wedge surface, allowing the rapid and safe clamping and releasing at a relatively large adjustable range and with high clamping force. Owing to the small pitch angle (wedge angle), the eccentric cam is self-arresting.
The ball lever is linked with the clamping bolt via a serrated ratchet, allowing the adjustment of the most suitable clamping position or the „readjustment“ of the handle.
Screw bolt and washer (see technical instructions) are matched to ensure that the clamping bolt can be easily turned after tightening. Using a washer requires no special requirements in terms of the threaded hole design. This means it can also be mounted on tables using T grooves.
Clamping bolts have the advantage that they can be turned after releasing in the clamping zone.
The use of GN 605 ball point screws with flattened ball is recommended in connection with the clamping bolts.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 82.30 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Clamping bolts, upward clamping, Steel
GANTER
Clamping bolts GN 918.1 have a circumferential wedge surface, allowing the rapid and safe clamping and releasing at a relatively large adjustable range and with high clamping force. Owing to the small pitch angle (wedge angle), the clamping bolt is self-arresting.
The ball lever is linked with the clamping bolt via a serrated ratchet, allowing the adjustment of the most suitable clamping position or the „readjustment“ of the handle.
Screw bolt and washer (see technical instructions) are matched to ensure that the clamping bolt can be easily turned after tightening. Using a washer requires no special requirements in terms of the threaded hole design. This means it can also be mounted on tables using T grooves.
Clamping bolts have the advantage that they can be turned after releasing in the clamping zone.
The use of GN 605 ball point screws with flattened ball is recommended in connection with the clamping bolts.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 45.40 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Clamping kits
GANTER
With clamping kits GN 511.1 swivel clamp mountings GN 482 can be combined with T-Swivel clamp mountings GN 483 and attachment clamp mountings GN 484 with the same k-dimensions into swivel clamp mounting
joints.
The centering bushing positions the swivel clamp mountings in relation to each other. During assembly, the knurled threaded bushing is inserted by the clamping screw itself and by pressing into one of the two swivel
clamp mountings and so serves to clamp the articulated joint.
The matching clamping kits are shown in the dimensional tables of the appropriate swivel clamp mountings.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 4.54 € Consegna da ： 5 giorni *Prezzo unitario in configurazione base
-
Clamping kits for connector clamps, Zinc die casting
GANTER
The clamping kits GN 911 replace the hexagon socket screws DIN 912 of the connector clamps.
The table of dimensions of the connector clamps shows the corresponding clamping kits for each clamping thread.
The distance bushing is included part of the order.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 7.16 € Consegna da ： 4 giorni *Prezzo unitario in configurazione base
-
Clamping kits, Zinc die casting / Stainless Steel
GANTER
For clamp mountings, the clamping kits GN 511 replace the hexagon socket screw DIN 912. It is used on all clamping points where repeated clamping actions are required, e.g. for adjusting a stop mechanism.
The matching clamping kits for each clamping thread are listed in the dimensional tables of the clamp mountings.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 6.68 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Clamping levers with eccentrical cam with internal thread, Lever steel
GANTER
Clamping levers with eccentrical cam GN 927.3 are used for rapid clamping and releasing. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
The lever has been designed to ensure that its movement cannot exceed the max. clamping force.
There are no loose components since they are all assembled and mounted in their correct order.
Type A has the following benefits:
The distance between the lever cam and the clamping surface is adjustable via a fine pitch thread, allowing the clamping position to be set easily with maximum clamping force. Also, the position of the lever relative to the clamping axis can be determined.
With these clamping levers with eccentrical cam GN 927.3, clamping forces of up to 8 kN can be reached.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 9.88 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Clamping levers with eccentrical cam with internal thread, Lever zinc die castin
GANTER
Clamping levers with eccentrical cam GN 927 are used for rapid clamping and releasing. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
The lever has been designed to ensure that its movement cannot exceed the max. clamping force.
There are no loose components since they are all assembled and mounted in their correct order.
Type A has the following benefits:
The distance between the lever cam and the clamping surface is adjustable via a fine pitch thread, allowing the clamping position to be set easily with maximum clamping force. Also, the position of the lever relative to the clamping axis can be determined.
With these clamping levers with eccentrical cam, clamping forces of up to 8 kN can be reached.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 8.36 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Clamping levers with eccentrical cam with threaded stud, Lever steel
GANTER
Clamping levers with eccentrical cam GN 927.3 are used for rapid clamping and releasing. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
The lever has been designed to ensure that its movement cannot exceed the max. clamping force.
There are no loose components since they are all assembled and mounted in their correct order.
Type A has the following benefits:
The distance between the lever cam and the clamping surface is adjustable via a fine pitch thread, allowing the clamping position to be set easily with maximum clamping force. Also, the position of the lever relative to the clamping axis can be determined.
With these clamping levers with eccentrical cam GN 927.3, clamping forces of up to 8 kN can be reached.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 11.36 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Clamping levers with eccentrical cam with threaded stud, Lever zinc die casting
GANTER
Clamping levers with eccentrical cam GN 927 are used for rapid clamping and releasing. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
The lever has been designed to ensure that its movement cannot exceed the max. clamping force.
There are no loose components since they are all assembled and mounted in their correct order.
Type A has the following benefits:
The distance between the lever cam and the clamping surface is adjustable via a fine pitch thread, allowing the clamping position to be set easily with maximum clamping force. Also, the position of the lever relative to the clamping axis can be determined.
With these clamping levers with eccentrical cam GN 927, clamping forces of up to 8 kN can be reached.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 9.72 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Clamping levers with eccentrical cam, Lever Stainless Steel
GANTER
Stainless Steel-Clamping levers with eccentrical cam GN 927.5 with Stainless Steel-threaded stud are used for rapid clamping and releasing operations. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
The lever has been designed to ensure that its movement cannot exceed the max. clamping position.
There are no loose components since they are all assembled and mounted in their correct order.
The salient points of type A are as follows:
The distance between the eccentrical cam and the contact surface is adjustable by means of a fine threaded knurled nut.
This allows the max. clamping force to be set by a simple adjustment. In addition this also allows the choice of the preferred lever position in relation to the clamping lever pin.
With these Stainless Steel-Clamping levers with eccentrical cam GN 927.5 , thrusts of up to 8 kN can be reached.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 13.42 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Clamping levers with eccentrical cam, Lever zinc die casting
GANTER
Clamping levers with eccentrical cam GN 927.4 with Stainless Steel-internal thread are used for rapid clamping and releasing. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
The lever has been designed to ensure that its movement cannot exceed the max. clamping force.
There are no loose components since they are all assembled and mounted in their correct order.
Type A has the following benefits:
The distance between the lever cam and the clamping surface is adjustable via a fine pitch thread, allowing the clamping position to be set easily with maximum clamping force. Also, the position of the lever relative to the clamping axis can be determined.
With these clamping levers with eccentrical cam, clamping forces of up to 8 kN can be reached.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 10.14 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Clamping levers with eccentrical cam, Lever zinc die casting
GANTER
Clamping levers with eccentrical cam GN 927.4 with Stainless Steel-threaded stud are used for rapid clamping and releasing. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
The lever has been designed to ensure that its movement cannot exceed the max. clamping force.
There are no loose components since they are all assembled and mounted in their correct order.
Type A has the following benefits:
The distance between the lever cam and the clamping surface is adjustable via a fine pitch thread, allowing the clamping position to be set easily with maximum clamping force. Also, the position of the lever relative to the clamping axis can be determined.
With these clamping levers with eccentrical cam GN 927.4 , clamping forces of up to 8 kN can be reached.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 11.76 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
A partire da∗ ： 8.90 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Clamping levers, Steel
GANTER
The official DIN standard sheet specifies additional sizes 40 - M5 / B5.- Sconto volumi elevati
A partire da∗ ： 6.20 € Consegna da ： 5 giorni *Prezzo unitario in configurazione base
-
Control levers, Steel
GANTER
The cover hides fasteners (see assembly instructions) and provides a printing facility for any symbol or logo.
On assembly, the cover is pushed in by hand and can be removed with a screw driver via a suitable slot.
Control levers GN 750 can also be supplied as standard with:
Square DIN 79 V + Bore diameter
Keyway DIN 6885 K + Bore diameter- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 18.60 € Consegna da ： 5 giorni *Prezzo unitario in configurazione base
-
Double cam levers, Stainless Steel
GANTER
Stainless Steel-Double cam levers GN 917.1 are used for repositioning and clamping. The eccentrical cam has the advantage that the clamping force remains constant in every position of its travel and in addition is self arresting.
The dimension b2 is made to match the head size of swing bolts DIN 444 and swing nuts GN 444.2 respectively.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 75.20 € Consegna da ： 5 giorni *Prezzo unitario in configurazione base
| Marchio |
|---|
| Serie prodotto |
| CAD |
| A partire da∗ |
| Consegna da ： |
| Applicazione |
| Tipo, morsetto |
| Tipo, funzionamento |
| Direzione di funzionamento |
| Profilo |
| Maniglia a ripresa a L |
| Profilo leva con manopola |
| Sezione di montaggio |
| Raggio di rotazione R(mm) |
| Materiale corpo principale |
| Corpo principale, trattamento superficie |
| Sezione di attacco, materiale |
| Sezione di attacco, trattamento superficie |
| Materiale manopola |
| Trattamento superficie manopola |
| Vite di regolazione distanza |
| Diam. sezione di montaggio d (mm) o diam. nominale |
| Sezione di attacco, lunghezza L(mm) |
| Sezione di montaggio Diametro C(mm) |
| Montaggio Sezione Spessore h(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Marchio | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER |
| Serie prodotto | Adjustable hand levers, Zinc die casting, threaded stud Stainless Steel | Adjustable hand levers, Zinc die casting, with threaded stud steel | Leve manuali regolabili piatte, zinco a pressofusione, prigioniero filettato in acciaio inox | Adjustable flat tension levers with tabbed stud, Stainless Steel | Adjustable flat tension levers with threaded stud, Stainless Steel | Adjustable hand levers, Zinc die casting, Bushing, Stainless Steel | Adjustable Stainless Steel-Hand levers, threaded bushing, electropolished | Adjustable Stainless Steel-Hand levers, threaded stud, electropolished | Clamping levers with eccentrical cam with internal thread, Lever steel | Clamping levers with eccentrical cam with internal thread, Lever zinc die castin | Clamping levers with eccentrical cam with threaded stud, Lever steel | Clamping levers with eccentrical cam with threaded stud, Lever zinc die casting | Clamping levers with eccentrical cam, Lever zinc die casting | Clamping levers with eccentrical cam, Lever zinc die casting | |||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
| A partire da∗ | 9.92 € *Prezzo unitario in configurazione base Sconto volumi elevati | 7.24 € *Prezzo unitario in configurazione base Sconto volumi elevati | 4.68 € *Prezzo unitario in configurazione base Sconto volumi elevati | 11.70 € *Prezzo unitario in configurazione base Sconto volumi elevati | 21.74 € *Prezzo unitario in configurazione base Sconto volumi elevati | 12.06 € *Prezzo unitario in configurazione base Sconto volumi elevati | 4.70 € *Prezzo unitario in configurazione base Sconto volumi elevati | 15.18 € *Prezzo unitario in configurazione base Sconto volumi elevati | 16.74 € *Prezzo unitario in configurazione base Sconto volumi elevati | 22.86 € *Prezzo unitario in configurazione base Sconto volumi elevati | 33.74 € *Prezzo unitario in configurazione base Sconto volumi elevati | 34.30 € *Prezzo unitario in configurazione base Sconto volumi elevati | 23.08 € *Prezzo unitario in configurazione base Sconto volumi elevati | 28.94 € *Prezzo unitario in configurazione base Sconto volumi elevati | 8.08 € *Prezzo unitario in configurazione base Sconto volumi elevati | 10.60 € *Prezzo unitario in configurazione base Sconto volumi elevati | 5.64 € *Prezzo unitario in configurazione base Sconto volumi elevati | 7.74 € *Prezzo unitario in configurazione base Sconto volumi elevati | 4.60 € *Prezzo unitario in configurazione base Sconto volumi elevati | 7.24 € *Prezzo unitario in configurazione base Sconto volumi elevati | 14.74 € *Prezzo unitario in configurazione base Sconto volumi elevati | 17.22 € *Prezzo unitario in configurazione base Sconto volumi elevati | 15.02 € *Prezzo unitario in configurazione base Sconto volumi elevati | 18.02 € *Prezzo unitario in configurazione base Sconto volumi elevati | 9.78 € *Prezzo unitario in configurazione base Sconto volumi elevati | 6.40 € *Prezzo unitario in configurazione base Sconto volumi elevati | 3.50 € *Prezzo unitario in configurazione base Sconto volumi elevati | 82.30 € *Prezzo unitario in configurazione base Sconto volumi elevati | 45.40 € *Prezzo unitario in configurazione base Sconto volumi elevati | 82.30 € *Prezzo unitario in configurazione base Sconto volumi elevati | 45.40 € *Prezzo unitario in configurazione base Sconto volumi elevati | 4.54 € *Prezzo unitario in configurazione base Sconto volumi elevati | 7.16 € *Prezzo unitario in configurazione base Sconto volumi elevati | 6.68 € *Prezzo unitario in configurazione base Sconto volumi elevati | 9.88 € *Prezzo unitario in configurazione base Sconto volumi elevati | 8.36 € *Prezzo unitario in configurazione base Sconto volumi elevati | 11.36 € *Prezzo unitario in configurazione base Sconto volumi elevati | 9.72 € *Prezzo unitario in configurazione base Sconto volumi elevati | 13.42 € *Prezzo unitario in configurazione base Sconto volumi elevati | 10.14 € *Prezzo unitario in configurazione base Sconto volumi elevati | 11.76 € *Prezzo unitario in configurazione base Sconto volumi elevati | 8.90 € *Prezzo unitario in configurazione base Sconto volumi elevati | 6.20 € *Prezzo unitario in configurazione base Sconto volumi elevati | 18.60 € *Prezzo unitario in configurazione base Sconto volumi elevati | 75.20 € *Prezzo unitario in configurazione base Sconto volumi elevati |
| Consegna da ： | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | 5 giorni | 7 giorni | 7 giorni | 5 giorni | Stesso giorno | Stesso giorno | 5 giorni | 5 giorni | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | 4 giorni | Stesso giorno | Stesso giorno | Stesso giorno | 5 giorni | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | 5 giorni | 4 giorni | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | 5 giorni | 5 giorni | 5 giorni |
| Applicazione | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tipo, morsetto | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tipo, funzionamento | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Direzione di funzionamento | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Profilo | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Maniglia a ripresa a L | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Profilo leva con manopola | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Sezione di montaggio | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Raggio di rotazione R(mm) | - | 30 ～ 108 | 30 ～ 108 | 63 ～ 101 | - | 30 ～ 45 | - | - | - | - | - | - | - | 63 ～ 108 | 30 ～ 63 | 30 ～ 78 | 30 ～ 78 | 30 ～ 78 | 30 ～ 108 | 30 ～ 108 | 30 ～ 92 | 30 ～ 92 | 30 ～ 92 | 30 ～ 92 | 63 ～ 160 | - | 63 ～ 160 | - | - | - | - | - | - | - | 63 ～ 101 | 63 ～ 101 | 63 ～ 101 | 63 ～ 101 | 63 ～ 101 | 63 ～ 101 | 63 ～ 101 | 50 ～ 125 | 50 ～ 200 | - | - |
| Materiale corpo principale | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Acciaio inox | - | - | - |
| Corpo principale, trattamento superficie | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Sezione di attacco, materiale | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Sezione di attacco, trattamento superficie | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Materiale manopola | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Trattamento superficie manopola | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Vite di regolazione distanza | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Diam. sezione di montaggio d (mm) o diam. nominale | - | 3 ～ 16 | - | 5 ～ 10 | - | 4 ～ 6 | - | - | - | - | - | - | - | 6 ～ 12 | - | - | - | - | 4 ～ 16 | 3 ～ 16 | 3 ～ 12 | 3 ～ 12 | 3 ～ 12 | 3 ～ 12 | - | - | - | - | - | - | - | 4 ～ 6 | 6 ～ 10 | 4 ～ 6 | 5 ～ 10 | 5 ～ 10 | - | - | - | 5 ～ 10 | - | 6 ～ 8 | 20 | - | - |
| Sezione di attacco, lunghezza L(mm) | - | - | - | - | 16 ～ 80 | - | - | 20 ～ 80 | 20 ～ 80 | - | - | 12 ～ 80 | 12 ～ 80 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Sezione di montaggio Diametro C(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Montaggio Sezione Spessore h(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Seleziona per:
Stock
-
- Stock Items Included
Limitare la ricerca specificando Spec./Dim.
-
Applicazione
- Fascetta
- Funzionamento
- Componenti annessi
-
Tipo, morsetto
-
Tipo, funzionamento
-
Direzione di funzionamento
-
Profilo
-
Profilo L
-
Profilo T
-
Forma a Y
-
Con manopola
-
Senza manopola
-
Altro
-
Profilo L
-
Maniglia a ripresa a L
-
Profilo leva con manopola
-
Sezione di montaggio
- Filettature
- Maschiati
- Foro rotondo
- Foro quadrato
-
Raggio di rotazione R(mm)
- 25
- 26
- 30
- 33.5
- 36.2
- 39
- 39.9
- 40
- 40.1
- 42
- 44
- 45
- 46.5
- 47.5
- 47.9
- 48
- 50
- 52.3
- 55
- 59.5
- 60
- 62
- 63
- 63.5
- 64
- 64.5
- 64.9
- 65
- 65.2
- 68
- 70
- 70.4
- 71.5
- 74
- 75
- 75.5
- 76
- 78
- 78.5
- 79
- 80
- 80.2
- 81
- 81.1
- 82
- 83
- 84
- 84.5
- 85
- 88
- 88.1
- 88.5
- 89
- 90
- 92
- 93
- 94.5
- 95
- 95.4
- 96
- 96.8
- 97
- 99
- 99.9
- 100
- 101
- 102
- 104
- 106
- 108
- 109
- 109.9
- 110
- 110.9
- 111
- 114
- 115
- 118
- 119
- 120
- 121
- 123
- 123.5
- 125
- 126.5
- 127
- 128
- 128.5
- 130
- 131
- 132
- 134
- 134.5
- 136
- 138
- 140
- 145
- 148
- 150
- 152
- 157
- 160
- 170
- 180
- 187.5
- 190
- 200
- 230
- 300
- 400
-
Materiale corpo principale
- Acciaio inox
- Acciaio
- Lega di Zinco
- Poliammide
- Nylon
- Alluminio
- Altro
-
Corpo principale, trattamento superficie
-
Sezione di attacco, materiale
-
Sezione di attacco, trattamento superficie
-
Materiale manopola
-
Trattamento superficie manopola
-
Vite di regolazione distanza
-
Diam. sezione di montaggio d (mm) o diam. nominale
-
Sezione di attacco, lunghezza L(mm)
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 12.5
- 13
- 14
- 15
- 15.5
- 16
- 17
- 17.5
- 18
- 19
- 19.5
- 20
- 21
- 22
- 23
- 25
- 26
- 26.5
- 27
- 29
- 30
- 31
- 32
- 34
- 35
- 36
- 40
- 43.5
- 45
- 47
- 50
- 52
- 57
- 60
- 63
- 65
- 69
- 72
- 72.5
- 80
- 85
- 86
- 93
- 100
- 120
- 125
- 126
- 132
- 140
- 160
- 190
- 200
-
Sezione di montaggio Diametro C(mm)
-
Montaggio Sezione Spessore h(mm)
Limitare la ricerca specificando il produttore
-
- MISUMI (19)
- KIPP (138)
- ESCO (128)
- GANTER (70)
- HALDER (47)
- KONISHI MFG (30)
- NABEYA BI-TECH (21)
- ELESA (18)
- EURO-FLEX (3)
- IMAO CORPORATION (3)
Limitare la ricerca specificando Tipo dati CAD
-
- 2D
- 3D
Categorie collegate a Leve di serraggio
-
- Guide telescopiche
- Elementi di fissaggio, chiavistelli
- Maniglie con blocco, serrature, chiavi
- Cavi e catene
- Staffe, minuterie
- Componenti per sollevamento e serraggio
- Maniglie
- Pomelli di serraggio
- Leve di serraggio
- Maniglie girevoli, manovelle
- Maniglie
- Cerniere
- Ferramenta da costruzione, interni, esterni
-
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.