Type Code Seach | *NOT READY*: #CODE

Suggerimento keywords

Suggerimenti codice prodotto

Prodotti fuori produzione

HOZAN Pinze, tronchesini, tenaglie

Numero di dati da visualizzare: 30; 45; 60

Ordina per:

Giorni spedizione	Tutti gli articoli Stesso giorno 3 giorni o meno 4 giorni o meno 5 giorni o meno 6 giorni o meno 7 giorni o meno 8 giorni o meno 9 giorni o meno 10 giorni o meno 11 giorni o meno

?* Informazioni su tempi di consegna e prezzi

Pinza P-43-150 / P-43-175

HOZAN

[Features]
· Available in 2 types (P-43-150/P-43-175) according to the size.
· Recommended for the Electrical Worker Proficiency Test.
· With cutter.
[Applications]
· Convenient when it is necessary to firmly grasp various objects.

A partire da^∗ ：	24.35 €
Consegna da ：	6 giorni

*Prezzo unitario in configurazione base

Pinza miniatura a becchi lunghi P-35

HOZAN

Small-mouth long nose pliers that are suitable for precision work in which fine bending and grabbing of small objects are necessary.
[Features]
· The width of the tip is only 0.6 mm, making it as thin as tweezers.
· Since the gripper at the tip is not knurled (serrated), it will not scratch the gripped objects.
· Compact size of 116 mm total length that fits in the palm of a woman.
· Chamfering of sharp projections of the rotating part reduces accidental injuries and promotes safe work.
· Equipped with coil spring to prevent fatigue even during continuous work.
· Anti-static (ESD) specification soft grip for safe work with electronics.
[Applications]
· Besides lead bending of electronic parts, this is also ideal for precision work such as accessory manufacturing and wire crafts.

A partire da^∗ ：	27.90 €
Consegna da ：	6 giorni

*Prezzo unitario in configurazione base

Molla elicoidale P-36-1 / 37-1

HOZAN

Replacement coil spring dedicated for miniature long-nose pliers.

A partire da^∗ ：	2.91 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Pinza P-211Z

HOZAN

Pliers that firmly grasp various objects.
[Features]
· Available in 2 types (P-211Z-150/P-211Z-200) according to the size.

A partire da^∗ ：	16.09 €
Consegna da ：	6 giorni

*Prezzo unitario in configurazione base

Forbici robuste N-838

HOZAN

Scissors for cutting thin aluminum plates and copper wires.
[Features]
· Hard chrome-plated finish with high wear resistance and smooth sharpness maintained.
· Cutting capacity (copper stranded wire): 2 mm2.
· Aluminum plate thickness: 0.5 mm.
· Hardness HRC (blade) of 59.
[Applications]
· Ideal for cutting thin films and paper.

A partire da^∗ ：	26.05 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Pinza a becchi lunghi P-15-125 / P-15-150

HOZAN

Compact general-purpose pliers.
[Features]
· Elastomer grip adopted to reduce fatigue during continuous work.
· It has been given a knurling treatment which bites into the workpiece and prevents slippage.
· Highly versatile.
· Lineup of the same shape without spring (P-15 Series) and with spring (P-14 Series) is available.
[Applications]
· Firmly holds the target object.
· The blade has HRC58 hardness capable of cutting φ2.6 (diameter 2.6 mm) copper wire and 2 mm² copper stranded wire.

A partire da^∗ ：	23.61 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Molla elicoidale N-21 / N-31 / N-32

Molla elicoidale N-21 / N-31 / N-32【10 Pezzi per confezione】

HOZAN

Replacement coil spring for use with various nippers, etc.
[Features]
· Excellent durability and recoverability and does not cause fatigue during continuous work.
[Applications]
· Ideal for replacement parts for nippers.

A partire da^∗ ：	2.91 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Tronchesino miniatura N-34

HOZAN

Copper and other soft wire dedicated nippers that place emphasis on the cutting surface finish.
[Features]
· Compact size of about 100 mm total length that fits in the palm of a woman.
· Ideal for precision work with a sense of size that makes rotation easy to control.
· With a cutting edge that can cut lightly and produces a clean cross-section, finished exclusively for copper wires.
· Has thin and flat blades that can do side cutting with little protrusion of the binding band, and can be used to work without injuring the hands.
· The handle is soft to grip and has anti-static (ESD) specifications that allow it to be used even in an electronic environment without any concerns.
· Adopts a coil spring with excellent durability and recoverability, and allows fatigue-free work even when constantly holding the tool.
[Applications]
· Ideal for cutting zip ties and thin copper wires, or precision work.

A partire da^∗ ：	31.61 €
Consegna da ：	9 giorni

*Prezzo unitario in configurazione base

Pinza miniatura a becchi lunghi P-36

HOZAN

Miniature long-nose pliers with anti-slip knurling.
[Features]
· Knurled to enhance the retention force.
· Hardness HRC: 46.
· Weight: 65 g.
· ESD control value: Ground resistance Rg < 1 x 10^12 Ω.
[Applications]
· Miniature longnose pliers.

A partire da^∗ ：	22.95 €
Consegna da ：	6 giorni

*Prezzo unitario in configurazione base

Tagliafili N-16

HOZAN

A useful wire cutter for cutting wire.
[Features]
· Wire can be cut cleanly without loosening its braid.
[Applications]
· Convenient for cutting braided wires.

A partire da^∗ ：	31.98 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Pinza a becchi lunghi piegati

HOZAN

Longnose pliers with curved tips that are suitable for narrow spaces and precision work.
[Features]
· The elastomer grip makes it ideal for working for extended periods.
· The tip of the longnose pliers is not only thin but is bent at 60 degrees.
[Applications]
· Ideal for detailed work and work in places where parts are densely concentrated.
· Curved tip type that is ideal for precision work in deep and narrow places.

A partire da^∗ ：	27.86 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Tronchesino a tagliente obliquo N-4

HOZAN

Angled finishing nippers with great sharpness.
[Features]
· Sharp and easy-to-use angled blade that's suitable for cutting copper wires.
[Applications]
· Ideal for vertical cutting of parallel lines.

Sconto volumi elevati

A partire da^∗ ：	29.75 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Tronchesino miniatura N-32

HOZAN

Small nippers suitable for precision work.
[Features]
· Compact size of 130 mm total length that fits in the palm. It provides excellent maneuverability and ease of use.
· Small body convenient for cutting binding bands in a limited space.
· With a cutting edge that can cut lightly and produces a clean cross-section, finished exclusively for copper wires.
· The cut end of the binding band is less likely to jump out, thus preventing hand injuries.
· Chamfering of sharp projections of the rotating part prevents inadvertent injuries and promotes safe work.
[Applications]
· Ideal for cutting soft wires such as copper.

A partire da^∗ ：	29.24 €
Consegna da ：	8 giorni

*Prezzo unitario in configurazione base

Tronchesino miniatura N-35

HOZAN

Miniature nippers with an anti-static grip to enable use at electronics sites.
[Features]
· Anti-static (ESD) specification elastomer grip for the handle.
· Adopts a coil spring with excellent durability and recoverability, and does not cause fatigue even when constantly holding the tool.
· For cutting copper wire (thin blade finish).
· The cutting edge is made sharp (shallow angle) to achieve light handling of the handle and excellent sharpness.
[Applications]
· Convenient for cutting copper wire.

A partire da^∗ ：	29.94 €
Consegna da ：	7 giorni

*Prezzo unitario in configurazione base

Pinza miniatura a becchi lunghi P-37

HOZAN

Miniature longnose pliers.
[Features]
· Not knurled.
· Hardness HRC: 46.
· Weight: 60 g.
· ESD control value: Ground resistance Rg < 1 x 10^12 Ω.
[Applications]
· Ideal for narrow and deep spots.
· The grip part is elongated, making it convenient for work in narrow and deep areas.

A partire da^∗ ：	27.45 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Tenaglie miniatura per piombi P-34

HOZAN

Wide/thin type pliers.
[Features]
· Not knurled.
· Hardness HRC: 42.
· Weight: 40 g.
· ESD control value: Ground resistance Rg < 1 x 10^12 Ω.
[Applications]
· Ideal for extraction and folding.

A partire da^∗ ：	27.87 €
Consegna da ：	7 giorni

*Prezzo unitario in configurazione base

Tronchesino di precisione N-58

HOZAN

Highly durable precision nippers with lead stoppers included.
[Features]
· A semi-flush cut type.
· Cutting capacity (copper wire): 0.18 to 0.8 mm diameter (lead stopper effective range).
· Hardness HRC: Body/46.
· Blade: 60.
· Weight: 40 g.
· ESD control value: Ground resistance Rg < 1 x 10¹² Ω.
[Applications]
· Ideal for cutting the leads of resistors, capacitors, etc.

A partire da^∗ ：	4.08 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Tronchesino a tagliente frontale N-33

HOZAN

Nippers with a long blade length.
[Features]
· Equipped with coil spring to prevent fatigue even during continuous work.
· As the blade is long, it is possible to cut 4 wires coming out of a modular jack at once.
[Applications]
· Ideal for cutting in deep places (slanted type).

A partire da^∗ ：	34.78 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Tronchesino a tagliente frontale N-36

HOZAN

Nippers ideal for cutting in deep places.
[Features]
· End component of the nippers has a blade so finish of the cross section is almost flat.
· The thin blade width of 3 mm makes it ideal for densely wired places.
· For cutting in deep places (vertical type).
[Applications]
· Ideal for cutting at dense and deep places.

A partire da^∗ ：	43.90 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Cesoie per cavi N-18

HOZAN

Cable cutter that helps keep the workpiece in place while cutting.
[Features]
· Even 22 mm² IV wires can be cut lightly and cleanly using one hand.
· Cutting capacity (VVF wire): φ2.0 mm (diameter 2.0 mm) x 2 cores.

A partire da^∗ ：	36.31 €
Consegna da ：	7 giorni

*Prezzo unitario in configurazione base

Pinza per catena P-220

HOZAN

Chain pliers.
[Features]
· Can be used in the removal and installation of roller chain clips used in production machinery and bicycles, etc.
· It has a magnet to prevent clips from falling during work.
· Firmly grasps a clip by the steps and grooves at the tip.
· Suitable chains: roller chains (clip style).
[Applications]
· Ideal for attaching/removing clips.

A partire da^∗ ：	20.76 €
Consegna da ：	6 giorni

*Prezzo unitario in configurazione base

Tronchesino N-12

HOZAN

Nippers with a sliding part that adopts a round Tyco type to enable heavy duty cutting.
[Features]
· Copper wire: 3.2 mm diameter, copper wire: 3.5 mm², iron wire: 1.9 mm diameter, VVF: 1.6 mm diameter x 2 cores.
· Round rubberized sliding portion capable of powerful cutting.
[Applications]
· Powerful type with round rubberized-type grip, ideal for cutting copper wires and iron wires.

A partire da^∗ ：	28.98 €
Consegna da ：	6 giorni

*Prezzo unitario in configurazione base

Tronchesino N-9-125 / N-9-150

HOZAN

Nipper of professional grade that combines usability and durability.
[Features]
· Has a strip hole that supports the use of thick wires.
· Two sizes are available (N-9-125/N-9-150).
· Elastomer is used for the grip.
· The elastomer grip feels great to touch and is recommended for extended periods of use.
[Applications]
· Convenient when working with thick wires.

A partire da^∗ ：	29.26 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Pinza P-57

HOZAN

Practical type pliers boasting excellent cutting force and durability.
[Features]
· Smooth to touch elastomer grip is used for the handle.
· Recommended product for the Electrical Worker Proficiency Test.
[Applications]
· Ideal for various types of manual work.

A partire da^∗ ：	34.53 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Forbici multiuso N-839

HOZAN

A multi-snip tool that can cut thin plates of aluminum plate in addition to VVR.
[Features]
· Cutting capacity (VCT wire): 3.5 mm2 x 4 cores.
· VVR wire: 3.5 mm2 x 3-cores.
· Aluminum plate: 1.2 mm.
· Copper stranded wire: 8 mm2.
· Hardness HRC (blade): 58.
[Applications]
· Ideal for cutting and stripping thick wires.

A partire da^∗ ：	32.45 €
Consegna da ：	7 giorni

*Prezzo unitario in configurazione base

Tronchesino miniatura N-31

HOZAN

Small nippers with a total length of 100 mm to fit the hand for easy use, suitable for precision work.
[Features]
· Cutting edge with emphasis on the cut surface finish for soft wires such as copper wire.
· Small body convenient for cutting binding bands in a limited space.
· Because it is a curved blade that can do side cutting, the band protrudes very little, with consideration given to safety for the fingers.
· Chamfering of sharp projections of the rotating part prevents inadvertent injuries and promotes safe work.
· Anti-static (ESD) specification carbon-free elastomer grip for safe work with electronics.
· Adopts a coil spring with excellent durability and recoverability, reducing fatigue during long-term work.
[Applications]
· The small body makes it convenient for cutting work in limited spaces.

A partire da^∗ ：	28.66 €
Consegna da ：	7 giorni

*Prezzo unitario in configurazione base

Pinza miniatura a becchi arrotondati P-39

HOZAN

Round mouth type pliers that do not hurt the workpiece.
[Features]
· Not knurled.
· Gripping parts are rounded so the target object can be held without causing damage.
[Applications]
· Ideal for various types of manual work.

A partire da^∗ ：	27.33 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Pinza a becchi lunghi P-22

HOZAN

High-grade longnose pliers with a fine tip and polished finish.
[Features]
· The tip is more tapered than P-15 and has been polished for high-quality finish.
· With anti-slip knurling.
[Applications]
· Ideal for various types of manual work.

A partire da^∗ ：	30.10 €
Consegna da ：	7 giorni

*Prezzo unitario in configurazione base

Pinza per piombo P-16

HOZAN

Lead pliers that firmly hold the target object.
[Features]
· The tip is wide and slim for excellent stability.
· Not knurled.
[Applications]
· Ideal for various types of manual work.

A partire da^∗ ：	27.86 €
Consegna da ：	6 giorni

*Prezzo unitario in configurazione base

Tronchesino a tagliente obliquo (con foro spellafili) N-5

HOZAN

Oblique blade type nippers with a strip hole.
[Features]
· With hole for N-4 wire strip.
[Applications]
· Ideal for vertical cutting of parallel lines.

A partire da^∗ ：	30.55 €
Consegna da ：	6 giorni

*Prezzo unitario in configurazione base

Tronchesino di precisione N-55

HOZAN

Nipper with a high-precision finish achieved via a combination of high-durability material and precision machining.
[Features]
· HOZAN's precision series made of alloy steel molded in precision grinding with toughness and hardness used for cutting tools.
· Enables safe precision wiring work without short circuit, discharge or scratches to parts.
· The machined handle portion has been thinned down to 1.7 mm, opens and closes smoothly, and features improved durability.
· Provides high toughness to the inner material hidden by the grip with an electrostatic discharge (ESD) specification.
· The precision set pin provides a box joint structure with fewer backlashes and smooth sliding part.
· Produces a full flush cut with only a single line, without burrs on the cut cross section.
[Applications]
· Optimal for work in narrow places with its fine blade size.

A partire da^∗ ：	70.98 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Pinza di precisione P-51

HOZAN

Pliers that catch fine copper wire firmly at the tip, with a diameter of 0.08 mm.
[Features]
· High-precision finish suitable for precision work. Not knurled.
· Enables safe precision wiring work without short circuit, discharge or scratches to parts.
· Cuts the surface more flatly.
· Steady handle opening/closing is achieved by the high-precision set pin.
· Opening and closing the handle creates no gap between sliding surfaces; even if loosening occurs in sliding surfaces, it can be adjusted easily.
· A box joint structure with no rattling when opening/closing the handle. Sustains good cutting quality.
[Applications]
· The tip is thin finished with high-precision and optimal for precise operations.

A partire da^∗ ：	63.13 €
Consegna da ：	6 giorni

*Prezzo unitario in configurazione base

Forbici robuste (dentate) N-841

HOZAN

Heavy-snippers that have wear-resistance improved by about 60% compared to conventional models.
[Features]
· Hard chrome-plated finish with high wear resistance and smooth sharpness maintained.
· Also suitable for cutting aramid fibers used for optical fiber cables, etc.
[Applications]
· Ideal for cutting thin aluminum plates or copper wires.

A partire da^∗ ：	28.43 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Pinza a becchi lunghi P-14

Pinza a becchi lunghi P-14【1-10 Pezzi per confezione】

HOZAN

Compact general-purpose pliers.
[Features]
· Coil spring device and elastomer grip adopted to reduce fatigue during continuous work.
· Anti-slip knurling helps to hold the workpiece firmly.
· The blade has HRC58 hardness capable of cutting 2.6 mmφ (diameter 2.6 mm) copper wire and 2 mm2 copper stranded wire.
[Applications]
· Convenient for cutting copper wire, etc. General purpose type.

A partire da^∗ ：	2.91 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Pinza per catena (punta tipo a 2 vie)

HOZAN

Clip joint (fitting piece) removal/attachment pliers for clip type roller chains, a 2 way type which can also be used on the side.
[Features]
· Supports a wide variety of uses, from production machine chains to chains on bicycles and motorized 2-wheel vehicles.
· Daily maintenance is made simpler with these pliers specifically designed for chains.
· P-221, which can also be used on the side, allows installing and removing of the chain in narrow places.
· The steps and V-shaped grooves securely hold a clip, suppressing sliding in the lateral direction and enabling reliable work.
· When removing or attaching the clip, there is no need to worry about whether to hook the step to the clip or pin.
· The tips of pliers have magnets to prevent the removed clip from getting lost.
[Applications]
· For attachment and detachment of roller chain clips of industrial machinery, bicycles, etc.

A partire da^∗ ：	23.11 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Tronchesino N-23

Tronchesino N-23【1-10 Pezzi per confezione】

HOZAN

Nippers that come equipped with a coil spring to prevent fatigue even during continuous work.
[Features]
· Uses an elastomer grip which is soft on the hands.
· Equipped with coil spring to prevent fatigue even during continuous work.
· Long blade length.
· Can be used to cut the wires coming out of the modular jack at once.
· Not too long and not too short to be a size that feels just right.
[Applications]
· Cutting wiring cords, etc.

A partire da^∗ ：	2.91 €
Consegna da ：	7 giorni

*Prezzo unitario in configurazione base

Tenaglie VVF P-59-175

HOZAN

Joint blade type pliers that can cut VVF cable 2.0 mm x 3 cores with ease.
[Features]
· A cutting blade for binding wires is attached at the base of the blade.
* Cut the iron binding wire with the cutting blade dedicated for binding wires.
* Cutting with other sections may damage the blade.
· Recommended product for the Electrical Worker Proficiency Test.
· Elastomer grip.
[Applications]
· Ideal for various types of manual work.

A partire da^∗ ：	54.64 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Spessimetro P-919

HOZAN

A strip gauge that allows stripping at the same length each time by pressing the wire against the backing plate.
[Features]
· Strippable length: 1-16 mm (with graduations in 1 mm increments).
· With a strip scrap expelling function and strip hole position guide.
· By setting a hole to be used for the strip and attaching the strip hole position guide, electric wires can be smoothly set.
[Applications]
· Mountable Product Number: P-960/963/967/968.
· Ideal for standard stripping work.

A partire da^∗ ：	13.27 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Tronchesini in plastica N-25

HOZAN

[Caratteristiche]
· Per il taglio e la sbavatura di aperture.
· Taglio di aperture in prodotti in plastica stampata a iniezione. Ideali per il taglio e la sbavatura.

A partire da^∗ ：	39.48 €
Consegna da ：	7 giorni

*Prezzo unitario in configurazione base


Marchio
Serie prodotto
A partire da^∗
Consegna da ：
Product Category
Plier Type
Plier Type
Nipper Type
Overall Length(mm)
Shaft/hole
With or without Spring
Steel Wire Cutting Performance(φ/mm)
Copper Wire Cutting Performance(φ/mm)
Piano Wire Cutting Performance(φ/mm)
Plastic Cutting Performance(φ/mm)
Stranded Wire Cutting Ability(φ/mm)
Stainless steel cutting ability(φ/mm)
VA (VVF) Wire Cutting Capacity(φ/mm)
With/without tip claw replacement function
Tip claw diameter(mm)
Compatible Ring Size(mm)
Parts Type


Marchio	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN
Serie prodotto	Pinza P-43-150 / P-43-175	Pinza miniatura a becchi lunghi P-35	Molla elicoidale P-36-1 / 37-1	Pinza P-211Z	Forbici robuste N-838	Pinza a becchi lunghi P-15-125 / P-15-150	Molla elicoidale N-21 / N-31 / N-32【10 Pezzi per confezione】	Tronchesino miniatura N-34	Pinza miniatura a becchi lunghi P-36	Tagliafili N-16	Pinza a becchi lunghi piegati	Tronchesino a tagliente obliquo N-4	Tronchesino miniatura N-32	Tronchesino miniatura N-35	Pinza miniatura a becchi lunghi P-37	Tenaglie miniatura per piombi P-34	Tronchesino di precisione N-58	Tronchesino a tagliente frontale N-33	Tronchesino a tagliente frontale N-36	Cesoie per cavi N-18	Pinza per catena P-220	Tronchesino N-12	Tronchesino N-9-125 / N-9-150	Pinza P-57	Forbici multiuso N-839	Tronchesino miniatura N-31	Pinza miniatura a becchi arrotondati P-39	Pinza a becchi lunghi P-22	Pinza per piombo P-16	Tronchesino a tagliente obliquo (con foro spellafili) N-5	Tronchesino di precisione N-55	Pinza di precisione P-51	Forbici robuste (dentate) N-841	Pinza a becchi lunghi P-14【1-10 Pezzi per confezione】	Pinza per catena (punta tipo a 2 vie)	Tronchesino N-23【1-10 Pezzi per confezione】	Tenaglie VVF P-59-175	Spessimetro P-919	Tronchesini in plastica N-25
A partire da^∗	24.35 € *Prezzo unitario in configurazione base	27.90 € *Prezzo unitario in configurazione base	2.91 € *Prezzo unitario in configurazione base	16.09 € *Prezzo unitario in configurazione base	26.05 € *Prezzo unitario in configurazione base	23.61 € *Prezzo unitario in configurazione base	2.91 € *Prezzo unitario in configurazione base	31.61 € *Prezzo unitario in configurazione base	22.95 € *Prezzo unitario in configurazione base	31.98 € *Prezzo unitario in configurazione base	27.86 € *Prezzo unitario in configurazione base	29.75 € *Prezzo unitario in configurazione base Sconto volumi elevati	29.24 € *Prezzo unitario in configurazione base	29.94 € *Prezzo unitario in configurazione base	27.45 € *Prezzo unitario in configurazione base	27.87 € *Prezzo unitario in configurazione base	4.08 € *Prezzo unitario in configurazione base	34.78 € *Prezzo unitario in configurazione base	43.90 € *Prezzo unitario in configurazione base	36.31 € *Prezzo unitario in configurazione base	20.76 € *Prezzo unitario in configurazione base	28.98 € *Prezzo unitario in configurazione base	29.26 € *Prezzo unitario in configurazione base	34.53 € *Prezzo unitario in configurazione base	32.45 € *Prezzo unitario in configurazione base	28.66 € *Prezzo unitario in configurazione base	27.33 € *Prezzo unitario in configurazione base	30.10 € *Prezzo unitario in configurazione base	27.86 € *Prezzo unitario in configurazione base	30.55 € *Prezzo unitario in configurazione base	70.98 € *Prezzo unitario in configurazione base	63.13 € *Prezzo unitario in configurazione base	28.43 € *Prezzo unitario in configurazione base	2.91 € *Prezzo unitario in configurazione base	23.11 € *Prezzo unitario in configurazione base	2.91 € *Prezzo unitario in configurazione base	54.64 € *Prezzo unitario in configurazione base	13.27 € *Prezzo unitario in configurazione base	39.48 € *Prezzo unitario in configurazione base
Consegna da ：	6 giorni	6 giorni	5 giorni	6 giorni	5 giorni	5 giorni	5 giorni	9 giorni	6 giorni	5 giorni	5 giorni	Stesso giorno	8 giorni	7 giorni	5 giorni	7 giorni	5 giorni	5 giorni	5 giorni	7 giorni	6 giorni	6 giorni	5 giorni	5 giorni	7 giorni	7 giorni	5 giorni	7 giorni	6 giorni	6 giorni	5 giorni	6 giorni	5 giorni	5 giorni	5 giorni	7 giorni	5 giorni	5 giorni	7 giorni
Product Category	Pinze	Pinze	Parti	Pinze	Tronchesini	Pinze	Parti	Tronchesini	Pinze	-	Pinze	Tronchesini	Tronchesini	Tronchesini	Pinze	Pinze	Tronchesini / Parti	Tronchesini	Tronchesini	-	Pinze	Tronchesini	Tronchesini	Pinze	Tronchesini	Tronchesini	Pinze	Pinze	Pinze	Tronchesini	Tronchesini	Pinze	Tronchesini	Pinze / Parti	Pinze	Tronchesini / Parti	Pinze	Parti	Tronchesini
Plier Type	-	-	-	Pinze	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Pinze	-	-	-	-	-	-	-	-	-	-	Pinze	-	-	Pinze	-	-	-	-
Plier Type	Pinze	Pinze a becco lungo	-	-	-	Pinze a becco lungo	-	-	Pinze a becco lungo	-	Pinze a becco lungo	-	-	-	Pinze a becco lungo	Pinze per piombi	-	-	-	-	-	-	-	Pinze	-	-	Pinze	Pinze a becco lungo	Pinze per piombi	-	-	-	-	Pinze a becco lungo	-	-	Pinze	-	-
Nipper Type	-	-	-	-	Tronchesini	-	-	Tronchesini	-	-	-	Tronchesini	Tronchesini	Tronchesini	-	-	Tronchesini	Tronchesini	Tronchesini	-	-	Tronchesini	Tronchesini	-	Tronchesini	Tronchesini	-	-	-	Tronchesini	Tronchesini	-	Tronchesini	-	-	Tronchesini	-	-	Tronchesini
Overall Length(mm)	163 ～ 188	116	-	168 ～ 206	162	150 ～ 163	-	102.5	125.5	200	159	133 ～ 158	128.5	128.5	138	116	105	116	117.5	161	165	163	135 ～ 152.5	195 ～ 220	190	102.5	118	163	159	133 ～ 158	105	125	160	150 ～ 163	165	133	201.5	-	132.5
Shaft/hole	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
With or without Spring	N/A	Disponibile	-	N/A	N/A	N/A	-	Disponibile	Disponibile	-	N/A	N/A	Disponibile	Disponibile	Disponibile	Disponibile	N/A	Disponibile	Disponibile	-	N/A	N/A	N/A	N/A	Disponibile	Disponibile	Disponibile	N/A	N/A	N/A	Disponibile	N/A	-	Disponibile	-	Disponibile	-	-	Disponibile
Steel Wire Cutting Performance(φ/mm)	-	-	-	-	-	-	-	-	-	5	-	1.2 ～ 1.4	-	-	-	-	-	-	-	-	-	1.9	1.6 ～ 1.9	-	-	-	-	-	-	1.2 ～ 1.4	-	-	-	-	-	-	-	-	-
Copper Wire Cutting Performance(φ/mm)	3.3 ～ 3.5	-	-	-	-	2.6	-	1	-	-	-	2 ～ 2.6	2	1.6	-	-	0.18～0.8	1	1	-	-	3.2	2.6 ～ 3.2	3.5 ～ 4	-	1.6	-	2.6	-	2 ～ 2.6	1	-	-	2.6	-	1.6	2.6	-	-
Piano Wire Cutting Performance(φ/mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Plastic Cutting Performance(φ/mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	1.5	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	5
Stranded Wire Cutting Ability(φ/mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	5	-	-
Stainless steel cutting ability(φ/mm)	-	-	-	-	-	-	-	-	-	5	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
VA (VVF) Wire Cutting Capacity(φ/mm)	1.6 x 2 core ～ 1.6 x 3 core	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	2.0 x 2 core	-	1.6 x 2 core	-	1.6 x 3 core ～ 2.0 × 3 core	-	-	-	-	-	-	-	-	-	-	-	-	2.0 × 3 core	-	-
With/without tip claw replacement function	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Tip claw diameter(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Compatible Ring Size(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Parts Type	-	-	Molla	-	-	-	Molla	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Molla	-	Molla	-	-	-

Seleziona per:

Stock

- Stock Items Included
Ripristina

Limitare la ricerca specificando Spec./Dim.

Product Category
- Pinze
- Pinze
- Tronchesini
- Parti
Ripristina

Plier Type
- Pinze
- Pinze per anello di sicurezza
Ripristina

Plier Type
Ripristina

Nipper Type
- Tronchesini
- Tronchesini a caldo
Ripristina

Overall Length(mm)
36

46

92

100

102.5

105

108

110

111.5

112

115

116

117

117.5

118

120

122

123

124

125

125.5

126

127

128

128.5

129

130

131

132

132.5

133

134

135

138

139

140

140|170|180|130

140|180

140|180|130|165

140|180|165

141

142

143

144

145

146

147

148

149

150

151

152

152.5

153

154

155

156

157

158

158.5

159

160

161

162

163

164

165

166

167

168

169

170

170|180

171

172

174

175

178

180

180|250

181

183

185

186

188

190

192

195

197

199

200

Approx. 200

201.5

202

203

204

205

206

208

210

213

214.5

215

217

219

220

223

223.5

224

225

227

228

229

230

240

242

245

250

266

270

Approximately 275

280

282

Approximately 285

290

293

295

297

300

305

310

320

340

400

455

460

560

570

590

600
Ripristina

Shaft/hole
- Per albero
- Per foro
- Uso con albero e con foro
Ripristina

With or without Spring
- Disponibile
- N/A
Ripristina

Steel Wire Cutting Performance(φ/mm)
0.5

0.8

0.8 (Soft Iron Wire)

Tip blade: 0.8 or less, Side blade: 1.2 or less

0.9

1

1.0 (Soft Iron Wire)

1.2

1.2 (Soft Iron Wire)

1.4

1.5

1.6

1.8

1.9

2

2.15

2.2

2.4

2.5

2.6

2.75

2.8

3

3.2

3.4

3.5

3.6

4

5.0

-
Ripristina

Copper Wire Cutting Performance(φ/mm)
0.10～0.60

0.1～0.80

0.1 to 1.00

0.18～0.8

0.20～0.80

0.2~2.0

0.8

1

1.2

Tip blade: 1.2 or less, Side blade: 1.2 or less

1.5

1.6

2

2.3

2.5

2.6

2.8

3

3.2

3.3

3.5

3.6

4

4.5

8.0

14

-
Ripristina

Piano Wire Cutting Performance(φ/mm)
0.5

0.75

1

1.2

1.8

2

2.2

2.5

3

3.6
Ripristina

Plastic Cutting Performance(φ/mm)
1

1.5

2

3

4

5

8

9

10
Ripristina

Stranded Wire Cutting Ability(φ/mm)
1.25

2

5

5.5

8
Ripristina

Stainless steel cutting ability(φ/mm)
0.8

0.9

1

1.2

2

5.0
Ripristina

VA (VVF) Wire Cutting Capacity(φ/mm)
1.6 x 2 core

1.6・2・2.6

1.6 x 3 core

1.6X3 core

1.6×3

2.0 x 2 core

2 x 3 core

2.0 × 3 core

2.0X3 core

2X3 core

2.0×3

2.0 x 4 core

2.6 x 3 core

2.6X3 core
Ripristina

With/without tip claw replacement function
- Disponibile
- N/A
Ripristina

Tip claw diameter(mm)
0.9

1.4

1.8

2

2.3

3.2

3.4

3.5

4.5
Ripristina

Compatible Ring Size(mm)
3-4

3–8

5-9

C-type for shaft: 10-30; Grip-type for shaft: 6-9; For hole: 12-30

10-25

12~13

19~30

19～40

25-50

32~75

32–80

40-65

82-180
Ripristina

Parts Type
- Punta lama
- Molla
- Pinze per anelli a scatto punta a griffe
Ripristina

Limitare la ricerca specificando il produttore

- WIHA (164)
- KNIPEX (89)
- MUROMOTO TEKKO (62)
- HOZAN (39)
- KEIBA (31)
- PHOENIX CONTACT (26)
- TSUNODA (26)
- TRUSCO NAKAYAMA (22)
- FUJIYA (21)
- ENGINEER (20)
- KTC(KYOTO TOOL) (20)
- THREE PEAKS GIKEN (14)
- LOBTEX (12)
- BERNSTEIN AG (10)
- MAEDAKINNZOKU (10)
- BAHCO (9)
- SMATO (9)
- IGARASHI PLIERS (8)
- WEIDMUELLER (7)
- E VALUE (5)
- LINDSTROM (4)
- HANAZONO TOOL (3)
- HAZET (3)
- SIGNET (3)
- SK 11 (3)
- H & H (2)
- NEPROS (2)
- ONISHI MANUFACTURING (2)
- RITTAL (2)
- ANEX (1)
- AS ONE (1)
- HANDIWORK (1)
- M & M (1)
- SUPER TOOL (1)
- TRAD (1)
- WELLER (1)
Ripristina